• 공업화학
• /
• 제28권5호
• /
• pp.521-528
• /
• 2017

폐 LCD 패널유리의 재활용방안을 찾고자, 폐 LCD 패널유리를 원료로 사용하여 수열반응에 의해 이온교환성능을 갖는 제올라이트 합성공정을 조사하였다. 폐 LCD 패널유리는 이온교환성능을 갖는 제올라이트의 제조 원료로 사용될 수 있음을 보여주었다. 이온교환능력을 갖는 제올라이트의 제조를 위한 조건은 폐 LCD 패널유리의 Al성분에 대한 Si성분의 몰비 2.0~2.8, 수열반응온도 $100^{\circ}C$, 수열반응시간 12 h이다. 상기조건에서 Al성분에 대한 Si성분의 몰비(Si/Al mole ratio)를 2.0으로 하는 경우 A형 제올라이트가 합성되며, 몰비를 2.8의 조건으로 유지하는 경우 P형 제올라이트의 생성된다. 폐 LCD 패널유리를 이용하여 제조된 A형 제올라이트는 양호한 이온교환능력 및 중금속 흡착능력을 보여 주었으며, 결정상이 큐빅상으로 안정적으로 성장할수록 이온 교환능력은 우수하다.

• 한국응용과학기술학회지
• /
• 제36권4호
• /
• pp.1088-1095
• /
• 2019

CKD 추출액은 시멘트공정에서 발생한 폐기물인 CKD를 시멘트 원료로 재사용하기 위해 공정 방해물질로 작용하는 KCl을 추출한 폐수이며, 폐수처리시설 증설 등의 문제로 추출액 무방류 및 이를 재이용하고자 하였다. 이온교환법을 적용하여 KCl을 제거한 결과, 이온교환 후 추출액의 pH는 12.7에서 pH 2 미만으로 감소하였으며 양이온교환수지의 H⁺가 이온교환을 거쳐 추출액에 용해되었음을 확인하였다. 이온교환의 선택성에 의해 Ca²⁺, K⁺ 순서로 제거되었으며, K⁺ 이온을 제거하기 위해 접촉시간의 증가가 필요함을 판단하였다. 이온교환수지와 직접접촉시간이 약 6배 높은 접촉시간을 갖는 회분식장치에서 연속흐름식장치 대비 4배 높은 K⁺ 제거 효율을, 7배 높은 Cl^- 제거 효율을 확인하였다. 양이온교환수지의 H⁺가 음이온교환수지의 OH^- 대비 1.2배 빠른 교환속도를 가짐을 추출액 pH 변화를 통해 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제25권1호
• /
• pp.79-84
• /
• 2004

The existing technological schemes for processing rhenium-containing raw materials involve the recovery of Re from solutions, which can be effectively achieved by anion exchange method. The application of anion exchange also allows to study rhenium state in aqueous solutions and to develop analytical control methods. The present work is focused on investigation of ion exchange equilibrium in the analytical system Re(VII)-HCl-$SnCl_2$-KSCN-anion exchanger by means of sorption-desorption method as well as by electron, IR- and diffuse reflection spectroscopy. It was shown that rhenium can be quantitatively recovered from this system. It is proposed to use the sorption-spectroscopic method for Re(VII) determination in aqueous solutions. The calibration curve is linear in the concentration range of 0.5-20.0 mg/L (sample volume is 25.0 mL) and the detection limit is 0.05 mg/L. The presence of Mo(VI), Cu(II), Fe(II, III), Ni(II), Zn(II) as well as $K^+,\;Na^+$ do not hinder the solid-phase determination of rhenium. Rhenium (VII) determination by diffuse reflection spectroscopy was carried out in model solutions as well as in samples of river-derived water and in solutions obtained after the dissolution of spent catalysts.

• 한국산업보건학회지
• /
• 제4권2호
• /
• pp.189-197
• /
• 1994

Analytic methods for Cr(VI) level in industrial hygienic field were suggested by the National Institute for Occupational Safety and Health(NIOSH method 7600, 7604). There were growing needs for measurement of Cr(III) and Cr(VI) levels simultaneously. Two analytical methods were suggested to determine Cr(III) and Cr(VI) levels simultaneously. The one is method by using reversed phase high peformance liquid chromatography(HPLC) and the other is by using ion exchange HPLC. The purpose of this work was to evaluate the usefulness of these two analytic methods. For the difference of ionic charges of Cr(III)-ethylendiamine tetraacetic acid(EDTA) chelate and $CrO_4{^-2}$, we could detect them simultaneously by ion exchange HPLC. Also, we attempted to determine the levels of Cr(III) and Cr(VI) chelated with sodium diethyldithiocarbamate(NaDDTC) by using reversed phase HPLC. The confirmation of Cr(III) and Cr(VI) were checked by fraction collector and nameless atomic absorption spectrometer. The optimal conditions for the formation of Cr(III)-EDTA chelate were two hours incubation period with pH 5. Cr(III)-EDTA and Cr(VI) in EDTA solution were successfully separated by anion exchange column using $Na_2CO_3/NaOH$ mixture as mobile phase. Peaks of Cr(III)-EDTA and Cr(VI) in EDTA were identified at 5 minutes and 7 minutes of retention time respectively by the ion exchange HPLC. The formation of Cr(III)-NaDDTC and Cr(VI)-NaDDTC chelates were twelve hours incubation period. Cr(III)-NaDDTC and Cr(VI)-NaDDTC chelates were separated by reversed phase column using methanol and water mixture as mobile phase. Peaks of Cr(VI)NaDDTC and Cr(III)-NaDDTC chelates were identified at 13 minutes and 26 minutes of retention time respectively by the reversed phase HPLC. Due to reduction of Cr(VI) to Cr(III), it seems to be not suitable for simultaneous determination of Cr(III)-NaDDTC and Cr(VI)-NaDDTC chelates by reversed phase HPLS. Simultaneos determination of Cr(III) and Cr(VI) by ion exchange HPLC was more accurate and simple method.

• 분석과학
• /
• 제21권4호
• /
• pp.272-278
• /
• 2008

$AG^{(R)}$ 50W-X8 양이온교환수지를 이용하여 14종의 희토류원소와 Y를분리하고, 유도결합플라스마 원자방출분광법(ICP-AES)으로 분석하는 방법에 대해 연구하였다. 수지에 대한 희토류원소의 이온교환용량은 매우 커 pH 1~6 범위와 0.3~1.0mL/min의 흐름속도에서 희토류원소는 모두 정량적으로 이온교환 되었다. 희토류원소의 돌파점 용량 곡선은 경희토류원소(Cerium 그릅)의 이온교환능력이 중희토류원소(Yttrium 그릅) 보다 큰 것을 보여주었다. 100mg의 이온교환수지에 각각 $200{\mu}g$의 희토류원소들이 이온교환 되어있을 때 대부분의 중희토류원소는 2.0M의 질산 10 mL로, 경희토류원소는 30mL로 정량적으로 탈착시킬 수 있었다. 본 방법으로 모나자이트 중에 희토류원소를 분석하였다. 모나자이트 중에 공존하는 Ti, Mn, Mg, Ca 등의 원소는 상대적으로 희토류원소 보다 이온교환 능력이 낮아, 매트릭스 원소로 부터 희토류원소의 분리가 가능하였다. 그러나 본 방법에서 분석 결과의 상대표준편차는 1~5%로 향상되지 않았다.

• Bulletin of the Korean Chemical Society
• /
• 제27권5호
• /
• pp.694-698
• /
• 2006

A method has been described for the chemical speciation, preconcentration and determination of Cr(III) and Cr(VI) species in filtered tannery waste waters by flame atomic absorption spectrometry using ion-exchange resins. Amberlite IR-120($H^+$) strongly acidic cation exchanger and Amberlite IRA-410($CI ^-$) strongly basic anion exchanger resins were used for the separation and preconcentration of Cr(III) and Cr(VI) species, respectively. Optimum condition for preconcentration and speciation was obtained by testing pH of sample and eluent, flow rates of sample and eluent, amount of resins, volume of sample and eluents, and effect of foreign ions. The recommended method has been successfully applied for the preconcentration and determination of chromium species in the dissolved phase of waste water samples collected from a tannery waste water treatment plant in Kayseri, Turkey. The detection limits achieved were 0.73 $\mu$g/L for Cr(III) and 0.81 $\mu$g/L for Cr(VI). Recovery studies showed 99% for Cr(III) and 98% for Cr(VI), for samples spiked with single species.

• 대한화학회지
• /
• 제8권2호
• /
• pp.39-42
• /
• 1964

As the bromination method with $Br_2^{82}$ for the synthesis of 5-bromouracil-$Br^{82}$ gave products with considerable impurities, e. g. uracil etc. an attempt to produce pure one by isotopic exchange method was performed. Bromide-82 ion such as $NH_4Br^{82}$ or $HBr^{82}$ undergoes no isotopic exchange with 5-bromouracil-Br. However, isotopic exchange between $NH_4Br^{82}$ and $Br_2$, and between $Br_2^{82}$ and 5-bromouracil-Br were too fast to determine the rate. The result indicated that this method can be used in the production of pure 5-bromouracil-$Br^{82}$. It was also found that the use of reducing agent to maintain $Br^{82}$ as bromide form was unnecessary on $NH_4Br^{82}$ production from reactor.

• 한국환경과학회지
• /
• 제14권10호
• /
• pp.919-928
• /
• 2005

This study introduces the development of new supercritical water oxidation(SCW)(multiple step oxidation) to destruct recalcitrant organic substances totally and safely by using sodium nitrate as an oxidant. This method has solved the problems of conventional SCW, such as precipitation of salt due to lowered permittivity, pressure increase following rapid rise of reaction temperature, and corrosion of reactor due to the generation of strong acid. Destruction condition and rate in the supercritical water were examined using Polyvinyl Chloride(PVC) and ion exchange resins as organic substances. The experiment was carried out at $450^{\circ}C$ for 30min, which is relatively lower than the temperature for supercritical water oxidation $(600-650^{\circ}C)$. The decomposition rates of various incombustible organic substances were very high [PVC$(87.5\%)$, Anion exchange resin$(98.6\%)$, Cationexchange resin$(98.0\%)$]. It was observed that hetero atoms existed in organic compounds and chlorine was neutralized by sodium (salt formation). However, relatively large amount of sodium nitrate (4 equivalent) was required to raise the decomposition ratio. For complete oxidation of PCB was intended, the amount of oxidizer was an important parameter.

• 전기화학회지
• /
• 제25권2호
• /
• pp.88-94
• /
• 2022

알칼리막 연료전지에 사용되는 음이온 교환막은 OH^-을 전달하는 역할을 하며 연료전지의 성능에 많은 영향을 미친다. 따라서 음이온 교환막의 정확한 OH^- 전도도를 측정하는 것은 매우 중요하다. 그러나 OH^-은 대기 중의 CO₂에 의해 중탄산염 형태로 쉽게 피독되어 전해질막의 정확한 OH^- 전도도를 측정하는 것은 매우 어렵다. 본 연구에서는 음이온 교환막의 정확한 OH^- 전도도를 측정하기 위하여 전기화학적 이온교환 처리법을 검증하였다. 또한 CO₂에 노출된 전해질막의 거동을 OH^- 전도도 변화를 통하여 확인하였다. 상용 음이온 교환 막인 Fumatech사의 FAA-3-50과 Orion Polymer사의 Orion TM1와 함께 본 연구 그룹에서 개발한 QPP-6F를 사용하여 정확한 OH^- 전도도 측정 및 CO₂ 피독 효과에 대해서 분석하였다.

• 전기학회논문지
• /
• 제60권6호
• /
• pp.1169-1174
• /
• 2011

CdTe thin-film solar cell technology is well known that it can theoretically improve its conversion efficiency and manufacturing costs compared to the conventional silicon solar cell technology, due to its optical band gap energy (about 1.45eV) for solar energy absorption, high light absorption capability and low cost requirements for producing solar cells. Although the prior studies obtained the high light absorption, CdTe thin film solar cell has not been come up to the sufficient efficiency yet. So, doping method was selected for the improvement of the electrical characteristics in CdTe solar cells. Some elements including Cu, Ag, Cd and Te were generally used for the p-dopant as substitutional acceptors in CdTe thin film. In this study, the sputtering-deposited CdTe thin film was immersed in $AgNO_3$ solution for ion exchange method to dope Ag ions. The effects of immersion temperature and Ag-concentration were investigated on the optical properties and electrical characteristics of CdTe thin film by using Auger electron spectroscopy depth-profile, UV-visible spectrophotometer, and a Hall effect measurement system. The best optical and electrical characteristics were sucessfully obtained by Ag doping at high temperature and concentration. The larger and more uniform diffusion of Ag ions made increase of the Ag ion density in CdTe thin film to decrease the series resistance as well as mede the faster diffusion of light by the metal ions to enhance the light absorption.