• Journal of Satellite, Information and Communications
• /
• v.10 no.2
• /
• pp.75-79
• /
• 2015

In this study, we investigated the electro-optical (EO) characteristic of fringe-field switching (FFS) mode cell by the ion beam alignment method on the a-C:H thin film. The suitable inorganic thin films for FFS cell and the aligning capabilities of nematic liquid crystal (NLC) using the new alignment material of a-C:H thin film were studied. An excellent voltage-transmittance (V-T) and response time curve of the ion beam aligned FFS-LCD was observed with oblique ion beam exposure on the a-C:H thin films. Also, the V-T hysteresis characteristics of the ion beam-aligned FFS-LCD with IB exposure on the a-C:H thin films is almost the same as that of the rubbing-aligned FFS cell on a polyimide surface.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.158-158
• /
• 2009

This paper focuses on improving organic thin film transistor (OTFT) characteristics by controlling the self-organization of pentacene molecules with an alignable high-dielectric-constant film. The process, based on the growth of pentacene film through high-vacuum sublimation, is a method of self-organization using ion-beam (IB) bombardment of the $HfO_2/Al_2O_3$ surface used as the gate dielectric layer. X-ray photoelectron spectroscopy indicates that the IB raises the rate of the structural anisotropy of the $HfO_2/Al_2O_3$film, and X-ray diffraction patterns show the possibility of increasing the anisotropy to create the self-organization of pentacene molecules in the first polarized monolayer. An effective mobility of $2.3{\times}10^{-3}cm^2V^{-1}s^{-1}$ was achieved, which is significantly different from that of pentacene films that are not aligned. The proposed OTFT devices with an ultrathin $HfO_2$ structure as the gate dielectric layer were operated at a gate voltage lower than 5 V.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.469-472
• /
• 2003

The nematic liquid crystal (NLC) aligning capabilities using a-C:H thin film deposited at the three kinds of rf bias condition were investigated. A high pretilt angle of about $11^{\circ}$ by the ion beam alignment method was observed on the a-C:H thin film (polymer-like carbon) deposited at 1W rf bias condition, and the low pretilt angle of the NLC was observed on the a-C:H thin film(diamond-like carbon) deposited at rf 30W and 60W bias condition. Consequently, the high NLC pretilt angle and the good aligning capabilities of LC alignment by the IB alignment method on the a-C:H thin film deposited at 1W rf bisa condition can be achieved.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.184-184
• /
• 2009

This paper introduces the characteristics of SnO2 inorganic film deposited by radio-frequency magnetron sputtering as an alternative alignment layer for liquid crystal display (LCD) applications. The pretilt angle of the SnO2 layer was shown to be a function of the ion beam(IB) incident angle, a planer alignment of nematic liquid crystal was achieved. The about $1.8^{\circ}$ of stable pretilt angle was achieved at the range from 1500 ~ 2500eV of incident energy. To characterize the film shows atomic force microscopy (AFM) on the IB irradiated SnO2 surfaceand the X-ray phtoelectron spectroscopy analysis showed that the liquid crystal(LC) alignment on the IB irradiated $SnO_2$ surface was due to the reformation of Sn-O bonds. Also, Figure 1 shows that The alignment capability of the IB irradiated SnO2 layers is maintained until annealing temperature of $200^{\circ}C$. Comparable electro-optical characteristics to rubbed polyimide were also achieved.

• Journal of Satellite, Information and Communications
• /
• v.7 no.3
• /
• pp.54-57
• /
• 2012

Nematic liquid crystal (NLC) alignment effects on SiOF layers via ion-beam (IB) irradiation for four types of incident energy were successfully studied. The effect of fluorine addition on silicon oxide film properties as a function of $SiOF_4/O_2$ gas flow ration was investigated. The SiOF thin film exhibits good chemical and the thermal stability of the SiOF thin film were sustained as function of the NLC alignment until $200^{\circ}C$ Also, the response-time characteristics of aligned LCD based on SiOF film were studied.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.159-159
• /
• 2009

We characterize a flexible self-assembled liquid crystal display (LCD) fabricated from a polyimide (PI) alignment layer with polydimethylsiloxane pixel walls. Ion beam (IB) irradiation aligned LC molecules in the PI layer and bonded two flexible plastic substrates in a one-step assembly of the pixel walls. X-ray photoelectron spectroscopic analysis, Fourier transform infrared spectroscopy, and scanning electron microscopy provided chemical and physical evidence for the formation of stable chemical bonds between the PI layer and the PDMS pixel walls in addition to the important maintenance of a uniform 6 um gap between the two substrates without the use of any epoxy resins or other polymers.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.174-174
• /
• 2010

본 연구에서는 IBS(Ion Beam Sputter) 증착방법으로 Cr2O3, Ta2O5 타겟을 이용하여 single layer 산화물 박막을 제작하였다. IBS 박막 증착 시 발생하는 전하의 영향을 상쇄시키기 위하여 neutralizer를 사용하였다. 증착 시 기판을 si, quartz, 그리고 sapphire로 변화시켜 각 기판위에 증착한 산화물 박막에 대한 특성평가를 하였으며, 증착 전 기판 cleaning방법에 따른 변화도 같이 관찰하였다. 증착된 박막의 두께, 거칠기, 밀도 등을 평가하기 위해 XRR(X-ray Reflectometer)을 이용하여 살펴보았다. 기판, 박막두께, cleaning 등의 조건을 변화시켜 여러 종류의 박막을 만들었다. Sapphire 기판에 증착한 박막은 XRR 그래프의 변화가 생겼는데 cleaning과 곡률반경에 의한 영향임을 확인하였다. 다른 종류의 기판에서도 같은 현상이 있을 것으로 예상되고, 이런 영향은 IBS로 증착되는 산화물박막을 분석하는 데에 많은 도움이 될 것으로 기대된다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.266-266
• /
• 2010

Ion beam sputtering(IBS)을 이용한 pattern 형성은 대상 물질의 제한이 적고 물리적 변수의 조절에 의해 쉽게 nano 구조의 형태와 크기를 조절할 수 있다는 점에서 관심을 받아오고 있다. 하지만 IBS를 이용한 pattern 형성이 어려운 물질들도 있어 다양한 기판에서의 nano pattern 형성에 관련된 많은 연구가 보고되고 있다. 본 연구발표에서는 유용한 반도체인 Si 표면에서의 IBS를 이용한 nano 구조 형성이 가능함과 그 과정에 대해 말하고자 한다. Ru을 100nm 두께로 증착시킨 Si(100)을 sputter 했을 때, Ru 표면에 잘 order된 nano pattern이 형성되었다. Sputter 시간이 증가하면서 pattern은 유지된 채 Ru이 깎여 나가다가 pattern의 가장 낮은 부분부터 Si기판이 드러나게 된다. 이 때 노출된 Si은 sputtering에 의해 깎여나가고 아직 Ru이 덮여있는 부분의 Si은 그대로 유지되어, Ru이 모두 sputter 되면서 보여지는 Si의 pattern은 Ru의 그것과 동일한 형태를 띄게 된다. 그 결과, Ru의 pattern이 Si으로 transfer되었음을 AFM과 SAM을 통해 확인할 수 있었다. 또한 IBS를 이용해 pattern 형성이 힘든 metallic glass에도 같은 방식으로 Ru을 쌓아 sputter 해봄으로써 pattern transfer를 확인해 볼 계획이다. 이러한 pattern transfer는 sputtering을 통한 pattern 형성이 어려웠던 다른 물질들에 그 가능성이 있음을 보여주고 있어 sputtering의 응용 폭이 넓어질 것을 기대한다.

• Journal of Satellite, Information and Communications
• /
• v.10 no.3
• /
• pp.89-93
• /
• 2015

Ion-beam irradiation(IB) on $HfO_2$ surface induced high-performance liquidcrystal(LC) driving at a 1-V threshold with vertical alignment of liquid crystals(LC). The high-k materials Atomic layer deposition was used to obtain LC orientation on ultrathin and high-quality films of $HfO_2$ layers. To analyze surface morphological transition of $HfO_2$ which can act as physical alignment effect of LC, atomic force microscopy images are employed with various IB intensities. The contact angle was measured to elucidate the mechanism of vertical alignment of LC on $HfO_2$ with IB irradiation. Contact angle measurement show the surface energy changes via IB intensity increasing.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04a
• /
• pp.41-41
• /
• 2008

In general, polyimides (PIs) are used in alignment layers in liquid crystal displays (LCDs). The rubbing alignment technique has been widely used to align the LC molecules on the PI layer. Although this method is suitable for mass production of LCDs because of its simple process and high productivity, it has certain limitations. A rubbed PI surface includes debris left by the cloth, and the generation of electrostatic charges during the rubbing induces local defects, streaks, and a grating-like wavy surface due to nonuniform microgrooves that degrade the display resolution of computer displays and digital television. Additional washing and drying to remove the debris, and overwriting for multi-domain formation to improve the electro-optical characteristics such as the wide viewing angle, reduce the cost-effectiveness of the process. Therefore, an alternative to non-rubbing techniques without changing the LC alignment layer (i.e, PI) is proposed. The surface of LC alignment layers as a function of the ion beam (IE) energy was modified. Various pretilt angles were created on the IB-irradiated PI surfaces. After IB irradiation, the Ar ions did not change the morphology of the PI surface, indicating that the pretilt angle was not due to microgrooves. To verify the compositional behavior for the LC alignment, the chemical bonding states of the ill-irradiated PI surfaces were analyzed in detail by XPS. The chemical structure analysis showed that ability of LCs to align was due to the preferential orientation of the carbon network, which was caused by the breaking of C=O double bonds in the imide ring, parallel to the incident 18 direction. The potential of non-rubbing technology for fabricating display devices was further conformed by achieving the superior electro-optical characteristics, compared to rubbed PI.