• Journal of Multimedia Information System
• /
• v.3 no.3
• /
• pp.103-110
• /
• 2016

The recent development of the Internet of things (IoT) has led to the introduction of new access control measures. Even during the access control for security, however, there might be privacy infringements due to unwanted information provision and collection. Measures to control this process are therefore required. This paper defines the structure and policies of tokens to protect privacy that can be exposed through the token information when you use the capability token in the IoT service system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.525-527
• /
• 2018

Recently, the risk of a safety accident for all children under seven years of age or kindergarten is on the rise. Therefore, we designed the system to inform the receiver of the safety situations generated when entering or exiting the school bus using the body's pressure, GPS, and IR through IoT. In addtion, The system is also designed so that the teacher can check safety status through the Bluetooth application when an infant enters or leaves the vehicle.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.11 no.3
• /
• pp.153-162
• /
• 2016

This paper proposes an optimal dynamic resource allocation method in IoT (Internet of Things) parking guidance system using Q-learning resource allocation model. In the proposed method, a resource allocation using a forecasting model based on Q-learning is employed for optimal utilization of parking guidance system. To demonstrate efficiency and availability of the proposed method, it is verified by computer simulation and practical testbed. Through simulation results, this paper proves that the proposed method can enhance total throughput, decrease penalty fee issued by SLA (Service Level Agreement) and reduce response time with the dynamic number of users.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.61-62
• /
• 2019

With development of IT technology, the ubiquitous has been realized in various industry. In construction industry, as well, end-edge techniques have been introduced such as managing technique the temperature and compressive strength of the concrete placed in structure in domestic and abroad project sites. However, several problems were found during application at the actual field regarding difficulties of connecting Bluetooth communication due to the short communication range, diffuse reflection caused by aluminum formwork, and high cost by using one-time sensor. Therefore to recover these shortages, and improve the performances, the wireless sensor network based concrete IoT management system for concrete early-age quality management was developed.

• Proceedings of the KIPE Conference
• /
• 2018.11a
• /
• pp.7-8
• /
• 2018

In this study, we develop a leakage current detection device of lighting installation. The reed switch using in proposed device is activated when the leakage current is generated. We also design a GUI system of a management computer using LabVIEW and administrator's mobile phone app based on IoT. As results, this study is to build an IoT convergence system and it aims to protect people and property by coping with leakage current fault in real time.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.1
• /
• pp.69-77
• /
• 2021

The widely used low-cost design methodology for IoT devices is very popular. In such a networked device, memory is composed of flash memory, SRAM, DRAM, etc., and because it processes a large amount of data, memory design is an important factor for system performance. Therefore, each device selects optimized design factors such as function, performance and cost according to market demand. The design of a memory architecture available for low-cost IoT devices is very limited with the configuration of SRAM, flash memory, and DRAM. In order to process as much data as possible in the same space, an architecture that supports parallel processing units is usually provided. Such parallel architecture is a design method that provides high performance at low cost. However, it needs precise software techniques for instruction and data mapping on the parallel architecture. This paper proposes an instruction/data mapping method to support optimized parallel processing performance. The proposed method optimizes system performance by actively using hardware and software parallelism.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.01a
• /
• pp.173-174
• /
• 2020

본 논문에서는 IoT(Internet of Things)와 릴레이(Relay)를 활용한 어항관리 시스템을 개발하였다. 기존의 어항관리시스템(Fishbowl Management System)은 가격이 높거나, 호환성이 떨어지기 때문에 개인이 도입하기에는 어려운 점이 있었다. 본 논문에서 제시하는 어항관리 시스템은 이러한 기존 시스템들의 단점을 극복하고 더 효율적인 어항 운영을 위한 대안으로서 제시된다. 가격이 낮은 미니컴퓨터와 웹 서버, 그리고 릴레이를 이용하여 장치를 제어함으로써 호환성 부족의 문제를 개선하여 어항에 사용되는 장치의 제약을 줄였다. 또한 웹 서버와 외부 데이터베이스 서버를 두어 어항의 상태를 관리, 기록할 수 있어서 어항 운영의 안정성을 높였다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.1
• /
• pp.237-242
• /
• 2017

This paper presents development of the transponder system which provides an accurate train position, especially for supporting 400km/h high speed train. Here, we analyzed an operating frequency band of the transponder system which can be interoperable with the Eurobalise system already installed in Korea railroad as to be used for the automatic train protection (ATP). By investigating the power frequency band and its data frequency band of the transponder system, we presents the adoptable frequency band for the developed transponder system. Additionally, through the real testbed using HEMU-430X, we evaluate its performance requirement and shows interoperable operation with the Eurobalise system.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2017.07a
• /
• pp.249-250
• /
• 2017

본 논문은 Raspberry Pi를 이용하여 IoT 시대에 맞춘 화재 예방 시스템(Fire Prevention System)을 개발하였다. 오늘날 모바일 기기의 보급이 일상화 되어있어, 어디에서나 IoT 제품들을 제어할 수 있다. 이러한 IoT 기술을 접목하여, 화재가 발생하기 전, 가스 센서를 이용하여 가스누출을 미리 감지하여 스마트 폰에 메시지를 전달함과 동시에 가스밸브을 잠금으로서 화재를 미연에 방지하도록 하였다.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.2
• /
• pp.135-141
• /
• 2019

Internet of thing becomes more active, many sensor devices are increasing. Sensors can use network wired network or use mobile communication network. From the viewpoint of the transmission rate, the mobile communication network can be roughly divided into two types of high-speed communication and low-speed communication. In the case of hundreds of millions of sensors in the mobile communication network, resources are wasted to use high-speed communication. Communication is required to reduce the transmission rate and appropriately allocate resources without wasting such resources. As the Internet of Thing has been activated, Narrowband Internet of Thing(NB-IoT), which is one of the low-power technologies in recent mobile communications, is in the spotlight from various companies. Currently, it can be seen that only NB-IoT or other low power consumption communication has the potential to be able to connect to the Internet with rapidly increasing sensor devices. In this paper, we designed and implemented a heater controller using Huawei NB-IoT communication Module, a server that collects controller information, and an application that allows default settings for devices. The main function of this system is to collect temperature and heater status and give it to the server, control the heater from the server, and set parameters for the heater to operate automatically. The system can be applied to places where wired communication is not established, such as road information, smart agriculture, and small reservoirs as well as heaters.