• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.6
• /
• pp.957-966
• /
• 2018

Recently, the demand for remote patient monitoring based on IoT has been increased due to aging population and an increase in single-person household. A non-contact biological signal measurement system using multiple IR-UWB radars for remote patient monitoring is proposed in this paper. To reduce error signals, a multilayer Subtraction algorithm is applied because when the background subtraction algorithm was applied to the biological signal processing, errors occurred such as voltage noise and staircase phenomenon. Therefore, a multilayer background subtraction algorithm is applied to reduce error occurrence. The multilayer background subtraction algorithm extracts the signal by calculating the amount of change between the previous clutter and the current clutter. In this study, the SVD algorithm is used. We applied the improved multilayer background subtraction algorithm to biological signal measurement and computed the respiration rate through Fast Fourier Transform (FFT). To verify the proposed system using IR-UWB radars and multilayer background subtraction algorithm, the respiration rate was measured. The validity of this study was verified by obtaining a precision of 97.36% as a result of a control experiment with Neulog's attachment type breathing apparatus. The implemented algorithm improves the inconvenience of the existing contact wearable method.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.2
• /
• pp.263-269
• /
• 2017

'Goal Model' is core knowledge of 'Autonomic Control System' suggested to minimize human interference in system management. 'Autonomic Control System' performs 'Monitoring-Analysis-Plan-Execution', that is the four step of 'Autonomic Control', based on 'Goal Model'. Therefore, it is necessary to quantify achievement ratio of 'Goal Model' of target system. Thus, this paper present 'Probabilistic Evaluation of Goal Model' for methodology how to quantify achievement ratio of 'Goal Model'. It comprises 3-steps including 'Goal modeling and weighting', 'Goal model monitoring', 'Goal model evaluation and analysis'. Through these research, we provide core knowledge for 'Autonomic Control system' and it is possible to increase the reliability of system by evaluating 'Goal model' with applying weight. As case study, we apply 'Goal model' to a 'Smart IoT Kit' and we demonstrate the validity of the suggested research.

• International journal of advanced smart convergence
• /
• v.11 no.3
• /
• pp.187-196
• /
• 2022

In this paper, we propose an example of designing and constructing a roof-type solar power plant structure equipped with a Pseudo-BIPV (Building-Integrated Photovoltaic) shape suitable for use as a roof of a small warehouse with a sandwich-type panel structure. As the characteristics of the roof-type solar power generation facility to be installed in the small warehouse proposed in this study, the shape of the roof is not a general A type, but a right-angled triangle shape with the slope is designed to face south. We chose a structure in which an inverter for one power plant and a control facility are linked by grouping several roofs of buildings. In addition, the height of the roof structure is less than 20 cm from the floor, and it has a shape similar to that of the BIPV, so it is building-friendly because it is almost in close contact with the roof. At the same time, the roof creates a reflective light source due to the white color. By linking this roof with a double-sided solar panel, we designed it to obtain both the advantage of the roof-friendliness and the advantage of efficiency improvement for the electric power generation based on the double-sided panel. Compared to the existing solar power generation facilities using A-shaped cross-sectional modules, the power generation efficiency of roofs in this case is increased by more than 11%, which we can confirm, through the comparison analysis of monitoring data between power plants in the same area. Therefore, if the roof-type solar structure suitable for the small warehouse we have presented in this paper is used, the facilities of electric power generation is eco-friendly. Further it is easier to obtain facility certification compared to the BIPV, and improved capacity of the power generation can be secured at low material cost. It is believed that the roof-type solar power generation facility we proposed can be usefully used for warehouse or factory-based smart housing. Sensor devices for monitoring, CCTV monitoring, or safety and environment management, operating in connection with the solar power generation facilities, are linked with the Internet of Things (IoT) solution, so they can be monitored and controlled remotely.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.4
• /
• pp.107-114
• /
• 2014

Things in the IoT(Internet of Things) make various services by exchanging information over networks. The IoT includes many types of WSNs(Wireless Sensor Networks) that consists of spatially distributed wireless sensor nodes and operates with the various purposes with useful technologies such as identification, sensing and communication. Typically, Zigbee network composed of low-cost and lowpower devices is mainly used for wide-area monitoring and remote device control systems. The IoT composed of various WSNs cannot interoperate among networks because of heterogeneous communication protocol and different data representation of each network, but can facilitate interconnection and information exchange among networks via the DDS, which is communication middleware standard that aims to enable real-time, high performance and interoperable data exchanges. In this paper, we proposed design of Zigbee Adaptor for two-way interoperation and data exchange between Zigbee network and other networks in the IoT. Zigbee Adaptor communicates with Zigbee network according to the Zigbee protocol and communicates with external networks via DDS. DDS-based Zigbee Adaptor can facilitate interoperation between a Zigbee network and external networks by systematic cooperation among its components.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.12
• /
• pp.1654-1661
• /
• 2020

Internet of Things(IoT) technology can remotely collect and control a sensing information of device by attaching a small communication device to equipment that does not support communication. Low-Power Wide-Area Network (LPWAN), a low-power, long-distance communication technology, was proposed to support IoT technology, and Long Range(LoRa) is representative. Various systems, including network device, can collect and control the status information of device in real time through remote access. However, when a network failure occurs, remote access and status monitoring are impossible unless there is a separate additional network. To overcome this problem, in this paper, we propose an independent remote device management system that can be easily attached to device, which monitors and controls equipment remotely using an independent network. We will design and implement the proposed system, via which we will show its practicality and expandability.

• Journal of Biomedical Engineering Research
• /
• v.44 no.2
• /
• pp.99-108
• /
• 2023

According to the COVID-19, development of various medical software based on IoT(Internet of Things) was accelerated. Especially, interest in a central software system that can remotely monitor and control ventilators is increasing to solve problems related to the continuous increase in severe COVID-19 patients. Since medical device software is closely related to human life, this study aims to develop central monitoring system that can remotely monitor and control multiple ventilators in compliance with medical device software development standards and to verify performance of system. In addition, to ensure the safety and reliability of this central monitoring system, this study also specifies risk management requirements that can identify hazardous situations and evaluate potential hazards and confirms the implementation of cybersecurity to protect against potential cyber threats, which can have serious consequences for patient safety. As a result, we obtained medical device software manufacturing certificates from MFDS(Ministry of Food and Drug Safety) through technical documents about performance verification, risk management and cybersecurity application.

• Journal of Platform Technology
• /
• v.11 no.3
• /
• pp.3-11
• /
• 2023

Real-time control systems are growing rapidly as infrastructure technologies such as IoT and mobile communication develop and services that value real-time such as factory management and vehicle operation checks increase. Various solutions have been proposed to increase the time sensitivity of this system, but most real-time control systems are currently composed of local servers and multiple clients located in control stations, which are transmitted to local servers where control systems are located. In this paper, we proposed an edge computing-based real-time control model that can reduce the time it takes for the bus information system, one of the real-time control systems, to provide the information to the user at the time it collects the information. Simulating the existing model and the edge computing model, the edge computing model confirmed that the cost for users to receive data is reduced from at least 10% to up to 80% compared to the existing model.

• Journal of the Korea Convergence Society
• /
• v.9 no.10
• /
• pp.29-35
• /
• 2018

A food waste disposer commonly used in restaurants or homes is a type of machine with an agitator attached. The food waste disposer of the crushing type has a problem that the agitator may be broken if the piping or decomposition filter is blocked. In addition, there is an inconvenience that the user must manually open the cover to check the level in the food waste disposer. To solve these problems, this paper proposes a device that combines basic IoT technology with food waste disposer. The proposed device additionally designs and implement a real-time monitor processor and an automatic control processor inside the existing food waste disposer. The proposed food waste disposer allows the user to monitor the inside of the device using the smartphone. In addition, when the food is filled up to a certain position in the food waste disposer, it automatically stops and alarms. Using the proposed system, the user can conveniently check the inside of the food waste disposer, which has the advantage of preventing malfunctions in advance and reducing the probability of malfunction.

• Journal of Bio-Environment Control
• /
• v.25 no.1
• /
• pp.30-41
• /
• 2016

Korean government has planned to increase the productivity of horticultural crops and to expand supply smart greenhouse for energy saving by modernization of horticultural facilities based on ICT in policy. However, the diversity and linkages of monitoring and control are significantly insufficient in the agricultural sector in the current situation. Therefore, development of a service system with smart-farm based on the internet of things(IoT) for intelligent systemization of all the process of agricultural production through remote control using complex algorithm for diverse monitoring and control is required. In this study, domestic and international research trend related to ICT-based horticultural facilities was briefly introduced and limits were analyzed in the domestic application of the advanced technology. Finally, future core technologies feasible to graft in agricultural field were reviewed.

• Journal of the Korean Institute of Gas
• /
• v.24 no.5
• /
• pp.10-19
• /
• 2020

Valve leak accidents in petrochemistry plants and gas utilities cause human and property damage. The main reason why happen gas inhalation, poisoning, fire and explosion accidents is gas valve leakage. To prevent gas leakage, inspectors check the facilities in the field. And they are at risk of gas leak accidents. So we applied IoT-based risk assessment, monitoring and automatic control system. It can detect both internal and external gas leakage, do real-time monitoring of industrial valve in the plant by using hybrid sensor. As the new safety management system for industrial valve is developed, it needs method to evaluate device performance and environmental components for the system. This study is about development of method to verify performance of the explosion-proofed hybrid sensing system include gas detector and optical fiber sensor supporting wire and wireless communication.