• Proceedings of the Korea Information Processing Society Conference
• /
• 2016.04a
• /
• pp.1011-1012
• /
• 2016

최근 무선 통신 기술과 센서 디바이스들의 발달로 센서 기반 IoT 환경이 다양한 분야에 활용되고 있다. 하지만, IoT 환경을 구성하는 센서 노드가 소형 하드웨어로 구성되어 있어 메모리, 처리능력, 에너지 등에서 많은 제약사항을 가지고 있다. 따라서, 본 논문에서는 키 없는 해시 함수를 이용하여 센서 노드간 인증 및 키 교환을 경량화 기법을 제안한다. 제안하는 시스템은 숲이나 군사지역 등 사람이 접근하기 어려운 곳에 활용되는 센서 노드들의 배터리 수명을 향상시켜 효율적이고 지속적인 데이터 수집이 가능할 것으로 기대된다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.04a
• /
• pp.480-482
• /
• 2017

최근 무선 통신 기술과 센서 디바이스들의 발달로 센서 기반 IoT 환경이 다양한 분야에 활용되고 있다. 하지만, 센서 네트워크 환경을 구성하는 센서 노드는 대부분 소형 하드웨어로 구성되어 있어 메모리, 처리능력, 에너지 등에서 많은 제약사항을 가지고 있다. 또한, 이기종 센서간의 통신 절차도 필요하다. 따라서, 본 논문에서는 DisTance-Bounding 프로토콜과 해시 함수를 이용하여 센서 노드간 인증 및 키 교환을 경량화 기법을 제안한다. 제안하는 시스템은 숲이나 군사지역 등 사람이 접근하기 어려운 곳에 활용되는 센서 노드들의 배터리 수명을 향상시켜 효율적이고 지속적인 데이터 수집이 가능할 것으로 기대된다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.8
• /
• pp.942-949
• /
• 2016

Efficient routing protocols designed for Wireless Sensor Networks (WSN) can be extended and applied to Internet of Things (IoT) data routing, as IoT can be considered to be an extension from WSN. When the size of the data in IoT is often bigger than in conventional WSNs, existing cluster routing protocol such as LEACH may cause high data loss rate due to its incomplete load balancing. We present an enhanced LEACH-based protocol which can minimize the data loss which is an important performance measure in IoT. In our proposed protocol, the base station estimates the location of nodes by the trilateration technique to make sure optimal number of cluster heads and members in a deterministic manner. We evaluate our proposed protocol via computer simulations in terms of data loss rate and average network lifetime.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.4
• /
• pp.211-218
• /
• 2018

Recently, various technologies related to IIoT are introduced continuously due to the spread of IoT and smart factory industries. This paper proposes the construction of a two-way wireless network system for monitoring plant equipment using these various technologies. The main technologies used in this thesis are design techniques for micro sensor nodes to monitor facility conditions at various sites, MQTT technology for wireless communication between local server and sensor nodes and Node-RED based design technologies, which store data collected and can be easily presented to users via wired and wireless wires. In addition, a wireless two-way camera system was also implemented in which the screen images of the site can be viewed in the situation room according to the instructions of the situation room when determining abnormal conditions.

• Journal of Internet of Things and Convergence
• /
• v.9 no.6
• /
• pp.75-81
• /
• 2023

This study propose the traffic shaping scheme on IoT Network. The proposed scheme can be operated on the gateway which called sink node and control the IoT traffic with considering the traffic type(real-time based or non real-time based). It is proved that the proposed scheme shows a efficient and compatible result by the numerical analysis and the simulation on the proposed model. And the efficient of the proposed scheme by the numerical analysis has a approximate result of the simulation.

• Journal of Internet Computing and Services
• /
• v.23 no.5
• /
• pp.1-7
• /
• 2022

IoT technology that utilizes wireless body area networks (WBAN) and biosensors is an important field in the health industry to minimize resources and monitor patients. In order to integrate IoT and WBAN, a cooperative protocol that constitutes WBAN's limited sensor nodes and rapid routing for efficient data transmission is required. In this paper we propose an we propose an energy efficient and cooperative link energy-efficient routing strategy(LEERS) to solve the problems of redundant data transmission detection and limited network sensor lifetime extention. The proposed scheme considers the hop count node congestion level towards the residual energy sink and bandwidth and parameters. In addition, by determining the path cost function and providing effective multi-hop routing, it is shown that the existing method is improved in terms of residual energy and throughput

• Journal of Convergence for Information Technology
• /
• v.10 no.11
• /
• pp.9-15
• /
• 2020

Wireless sensor nodes adopting the advanced preamble detection function, Message-In-Mesage (MIM), maximize the concurrent transmission opportunities due to the capture effect, result in improving the system performance significantly compared to the legacy IEEE 802.15.4 based sensor devices. In this paper, we propose an MIM capture probability model to analyze the performance gains by applying the MIM function to the wireless sensor nodes. We implemented the IEEE 802.15.4 and MIM by Python and performed extensive simulations to verify the performance gains through MIM capture effects. The evaluation results show that the MIM sensors achieve 34% system throughput gains and 31% transmission delay gains over the legacy IEEE 802.15.4-based sensors, which confirm that it was consistent with the analysis result of the proposed MIM capture probability model.

• Journal of the Institute of Convergence Signal Processing
• /
• v.18 no.1
• /
• pp.6-12
• /
• 2017

In this paper, we proposed IoT based Smart Health Service using Motion Recognition for Human UX/UI. Until now, sensor networks using M2M-based u-healthcare are using non-IP protocol instead of TCP / IP protocol. However, in order to increase the service utilization and facilitate the management of the IoT-based sensor network, many sensors are required to be connected to the Internet. Therefore, IoT-based smart health service is designed considering network mobility because it is necessary to communicate not only the data measured by sensors but also the Internet. In addition, IoT-based smart health service developed smart health service for motion detection as well as bio information unlike existing healthcare platform. WBAN communications used in u-healthcare typically consist of many networked devices and gateways. The method proposed in this paper can easily cope with dynamic changes even in a wireless environment by using a technology supporting mobility between WBAN sensor nodes, and systematic management is performed through detection of a user's motion.

• Journal of KIISE
• /
• v.44 no.2
• /
• pp.213-222
• /
• 2017

The Internet of Things (IoT) technology is rapidly developing in recent years, and is applicable to various fields. A smart factory is one wherein all the components are organically connected to each other via a WSN, using an intelligent operating system and the IoT. A smart factory technology is used for flexible process automation and custom manufacturing, and hence needs adaptive network management for frequent network fluctuations. Moreover, ensuring the timeliness of the data collected through sensor nodes is crucial. In order to ensure network timeliness, the power consumption for information exchange increases. In this paper, we propose an IEEE 802.15.4e DSME-based distributed scheduling algorithm for mobility support, and we evaluate various performance metrics. The proposed algorithm adaptively assigns communication slots by analyzing the network traffic of each node, and improves the network reliability and timeliness. The experimental results indicate that the throughput of the DSME MAC protocol is better than the IEEE 802.15.4e TSCH and the legacy slotted CSMA/CA in large networks with more than 30 nodes. Also, the proposed algorithm improves the throughput by 15%, higher than other MACs including the original DSME. Experimentally, we confirm that the algorithm reduces power consumption by improving the availability of communication slots. The proposed algorithm improves the power consumption by 40%, higher than other MACs.

• Convergence Security Journal
• /
• v.15 no.4
• /
• pp.35-41
• /
• 2015

Internet of Things has a wide range of vulnerabilities are exposed to information security threats. However, this does not deal with the basic solution, the vaccine does not secure encryption for the data transmission. The encryption and authentication message transmitted from one node to the construction of the secure wireless sensor networks is required. In order to satisfy the constraint, and security requirements of the sensor network, lightweight encryption and authentication technologies, the light key management technology for the sensor environment it is required. Mandatory sensor network security technology, privacy protection technology subchannel attack prevention, and technology. In order to establish a secure wireless sensor networks encrypt messages sent between the nodes and it is important to authenticate. Lightweight it shall apply the intrusion detection mechanism functions to securely detect the presence of the node on the network. From the sensor node is not involved will determine the authenticity of the terminal authentication technologies, there is a need for a system. Network security technology in an Internet environment objects is a technique for enhancing the security of communication channel between the devices and the sensor to be the center.