• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.5
• /
• pp.130-145
• /
• 2021

As part of the Smart Seoul policy, the importance of using big urban data is being highlighted. Furthermore interest in the impact of transportation-related urban environmental factors such as PM10 and noise on citizen's quality of life is steadily increasing. This study established the integrated DB by matching IoT big data with transportation data, including traffic volume and speed in the microscopic Spatio-temporal scope. This data analyzed the impact of a spatial unit in the road-effect zone on environmental risk level. In addition, spatial units with similar characteristics of road traffic and environmental factors were clustered. The results of this study can provide the basis for systematically establishing environmental risk management of urban spatial units such as PM10 or PM2.5 hot-spot and noise hot-spot.

• Journal of Korea Society of Industrial Information Systems
• /
• v.26 no.1
• /
• pp.21-29
• /
• 2021

The emerging smart world based on IoT requires deployment of a large number of diverse sensors to generate data pertaining to different applications. Recent years have witnessed a plethora of IoT solutions beneficial to various application domains, IoT techniques also help boost agricultural productivity by increasing crop yields and reducing losses. This paper presents a predictive IoT smart farm platform for forcast services. We built an online agricultural forecasting service that collects microclimate data from weather stations in real-time. To demonstrate effectiveness of our proposed system, we designed a frost and pest forecasting modes on the microclimate data collected from weather stations, notifies the possibilities of frost, and sends pest forecast messages to farmers using push services so that they can protect crops against damages. It is expected to provide effectively that more precise climate forecasts thus could potentially precision agricultural services to reduce crop damages and unnecessary costs, such as the use of non-essential pesticides.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.5
• /
• pp.301-308
• /
• 2021

It is important to develop a digital SOC (Social Overhead Capital) maintenance system for preemptive maintenance in response to the rapid aging of social infrastructures. Abnormal signals induced from structures can be detected quickly and optimal decisions can be made promptly using IoT sensors deployed on the structures. In this study, a digital SOC monitoring system incorporating a multimetric IoT sensor was developed for long-term monitoring, for use in cloud-computing server for automated and powerful data analysis, and for establishing databases to perform : (1) multimetric sensing, (2) long-term operation, and (3) LTE-based direct communication. The developed sensor had three axes of acceleration, and five axes of strain sensing channels for multimetric sensing, and had an event-driven power management system that activated the sensors only when vibration exceeded a predetermined limit, or the timer was triggered. The power management system could reduce power consumption, and an additional solar panel charging could enable long-term operation. Data from the sensors were transmitted to the server in real-time via low-power LTE-CAT M1 communication, which does not require an additional gateway device. Furthermore, the cloud server was developed to receive multi-variable data from the sensor, and perform a displacement fusion algorithm to obtain reference-free structural displacement for ambient structural assessment. The proposed digital SOC system was experimentally validated on a steel railroad and concrete girder bridge.

• Journal of Internet Computing and Services
• /
• v.21 no.6
• /
• pp.95-104
• /
• 2020

In this paper, we propose the real time indoor air quality monitoring and controlling platform on cloud using IoT sensor data such as PM10, PM2.5, CO2, VOCs, temperature, and humidity which has direct or indirect impact to indoor air quality. The system is connected to air ventilator to manage and optimize the indoor air quality. The proposed system has three main parts; First, IoT data collection service to measure, and collect indoor air quality in real time from IoT sensor network, Second, Big data processing pipeline to process and store the collected data on cloud platform and Finally, Big data analysis and visualization service to give real time insight of indoor air quality on mobile and web application. For the implication of the proposed system, IoT sensor kits are installed on three different public day care center where the indoor pollution can cause serious impact to the health and education of growing kids. Analyzed results are visualized on mobile and web application. The impact of ventilation system to indoor air quality is tested statistically and the result shows the proper optimization of indoor air quality.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.5
• /
• pp.421-428
• /
• 2022

The earthwork is a core process of all constructions, and compaction measurement of earthwork play an important role in improving productivity. The analog tests such as Plate Bearing Test and Sand-cone occupy current compaction measurement techniques. Due to advanced 4th Industrial Revolution, research on analog tests combined smart construction technology are actively conducted. DCPT (Dynamic Cone penetration Test), simpler and faster than conventional tests, has recently on rise. However, it is also an analog that measures data manually and has several disadvantages such as history management and data verification. The IoT-based DCPT system developed in this study combines digital wire sensors, mobile phones, and Bluetooth with conventional DCPT. Compare to conventional test methods, IoT-based DCPT has advantages such as performance time, single-person measurement, low cost, mobile-based management, and real-time data verification. In addition, a test bed was built to verify IoT-based DCPT. The test bed was built under similar conditions to the actual earthworks site through roller equipment. DCPT data obtained from 322 stations. As a result, IoT-based DCPT showed good performance, and the test bed was also showed stable results as the compaction was carried out.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.2
• /
• pp.15-26
• /
• 2021

Recently, as the introduction of cloud, mobile, and IoT has become active, there is a growing need for technology development that can supplement the limitations of traditional security solutions based on fixed perimeters such as firewalls and Network Access Control (NAC). In response to this, SDP (Software Defined Perimeter) has recently emerged as a new base technology. Unlike existing security technologies, SDP can sets security boundaries (install Gateway S/W) regardless of the location of the protected resources (servers, IoT gateways, etc.) and neutralize most of the network-based hacking attacks that are becoming increasingly sofiscated. In particular, SDP is regarded as a security technology suitable for the cloud and IoT fields. In this study, a new access control system was proposed by combining SDP and hash tree-based large-scale data high-speed signature technology. Through the process authentication function using large-scale data high-speed signature technology, it prevents the threat of unknown malware intruding into the endpoint in advance, and implements a kernel-level security technology that makes it impossible for user-level attacks during the backup and recovery of major data. As a result, endpoint security, which is a weak part of SDP, has been strengthened. The proposed system was developed as a prototype, and the performance test was completed through a test of an authorized testing agency (TTA V&V Test). The SDP-based access control solution is a technology with high potential that can be used in smart car security.

• Journal of the Korean Geosynthetics Society
• /
• v.21 no.4
• /
• pp.1-12
• /
• 2022

Generally, the plate load test and the field density test are conducted for compaction quality control in earthwork, and then additional analysis. Recently developed that the DCPT (Dynamic Cone Penetration Test) equipment for smart compaction quality control its the system are able to get location and real-time information about worker history management. The IoT-based the DCPT system improved the time-cost in the field compared traditional test, and the functions recording and storage of the DPI (Dynamic Cone Penetration Index) were automated. This paper describes using these DCPT equipment on in-situ and compared to the standards of the DCPT, and the compaction trend had be confirmed with DPI as the field test data. As a result, the DPI of the final compaction decreased by 1.4 times compared to the initial compaction, confirming the increase in the compaction strength of the subgrade compaction layer 10 to 14 cm deep from the surface. A trend of increasing compaction strength was observed. This showed a tendency to increase the compaction strength of the target DPI proposed by MnDOT and the results of the existing plate load test, but there was a difference in the increase rate. Therefore, additional studies are needed on domestic compaction materials and laboratory conditions for target DPI and correlation studies with the plate load tests. If this is reflected, it is suggested that DCPT will be widely used as smart construction equipment in earthworks.

• Journal of Internet of Things and Convergence
• /
• v.10 no.4
• /
• pp.1-8
• /
• 2024

As technology advances, Internet of Things (IoT) technology is rapidly evolving as well. Various protocols, including Message Queuing Telemetry Transport (MQTT), are being used in IoT technology. MQTT, a lightweight messaging protocol, is considered a de-facto standard in the IoT field due to its efficiency in transmitting data even in environments with limited bandwidth and power. In this paper, we propose a method to improve the message transmission method in MQTT 5.0, specifically focusing on the shared subscription feature. The widely used round-robin method in shared subscriptions has the drawback of not considering the current state of the clients. To address this limitation, we propose a method to select the optimal transmission method by considering the current state. We model this problem based on Markov decision process (MDP) and utilize Q-Learning to select the optimal transmission method. Through simulation results, we compare our proposed method with existing methods in various environments and conduct performance analysis. We confirm that our proposed method outperforms existing methods in terms of performance and conclude by suggesting future research directions.

• Electronics and Telecommunications Trends
• /
• v.29 no.4
• /
• pp.82-90
• /
• 2014

우리 사회는 산업혁명, 정보화혁명을 거쳐, 모든 것이 인터넷과 연결되는 사물인터넷(Internet of Things) 기반의 초연결 혁명 진행 중에 있다. 이에 정부는 사물인터넷을 공공, 산업, 개인 등 국가사회 현안 해결의 수단으로 활용하여 산업경쟁력 강화 및 창의적 IoT 서비스 제품 창출과 중소 중견 전문기업 육성을 시도하고 있다. 이에 본고에서는 사물인터넷의 핵심인 단말 플랫폼기술에 대한 글로벌 기업 및 프로젝트들의 하드웨어와 소프트웨어 융합기반 사업화 동향을 분석하고, 국내 단말 플랫폼의 개발현황 및 문제점을 살펴본다. 뿐만 아니라, 향후 사물인터넷의 단말 플랫폼 경쟁력 확보 및 생태계 구축을 위한 단말 소프트웨어 플랫폼과 하드웨어 플랫폼 구축방법으로 개발자 지향 개방형 SW-SoC(System on Chip) 융합을 통한 인프라 구축방안 제시하고, 사물인터넷 서비스의 확산을 위해 산 학 연 협력기반 기술개발 로드맵 방향을 제시한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.253-255
• /
• 2017

본 논문에서는 IoT 디바이스의 인증암호를 위한 AES-GCM 암호코어를 설계하였다. AES-GCM 코어는 블록암호 AES와 GHASH 연산으로 기밀성과 무결성을 동시에 제공한다. 기밀성 제공을 위한 블록암호 AES는 운영모드 CTR과 비밀키 길이 128/256-bit를 지원한다. GHASH 연산과 AES 암호화(복호화)의 병렬 동작을 위해 소요 클록 사이클을 일치시켜 GCM 동작을 최적화 하였다. 본 논문에서는 AES-GCM 코어를 Verilog HDL로 모델링 하였고 ModelSim을 이용한 시뮬레이션 검증 결과 정상 동작함을 확인하였으며 Xilinx Virtex5 XC5VSX95T FPGA 디바이스 합성결과 4,567 슬라이스로 구현되었다.