• Journal of Advanced Marine Engineering and Technology
• /
• 제8권2호
• /
• pp.74-80
• /
• 1984

In the reduction gears for marine propulsion engine such as turbine or high speed diesel engine, the standard involute double helical gears are generally used. However the addendum modification gear can be used in the reduction gear as it has flexibility for gear design on the tooth strength, scoring and operating noise. In this case, the determination of gear shaft bearing load is difficult by the alternation of operating pressure angle. In this paper, the formulas of bearing load according to the arrangements of the reduction gears are derived and the diagrams of operating pressure angle according to the modification coefficient are presented.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.572-577
• /
• 1997

This present paper describes a mathematical model of profile elliptical gears, and this model is based on the concepts of envelop theory and conjugate geometry between the blank and the straight-sided rack cutter. The geometric model of the rack cutter includes working regions generating involute curves andd fillets for trocoidal curves, and furthermore the addendum modified coeff,is considered for avoiding undercutting. The addendum modified coeff, is changed linearly along with pitch curves and must be the must be the same absolute value at both major semi-axis and minor semi-axis. If undercutting is at all pronounced, the undercut tooth not only are weakened in strength, but lose a small portion of the involute adjacent to the base circle, then this loss of involute may ncause a serios reduction in the length of contact. A very effective method of avoiding undercutting is to use the so-called profile shifted gearing. Non-undercutting conditon is examined with the change of eccentricity and addendum modefied coeff. in elliptical gears and then the minimum number of tooth is proposed not to gernerate undercutting phenomenon.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.25-30
• /
• 2002

To reduce the vibration of a gear driving system, the modification of gear tooth from the orignal involute gear profile is usually done in gear manufacturers. The quantity of tooth modification has been decided on the basis of the interference between two gear teeth during gear meshing and the elastic deformation due to loading. However, the dynamic characteristics with tooth modification has to be investigated to avoid the instability to the variation of gear meshing stiffness and the nonlinearity due to gear backlash which results in sub- or super-harmonics in its responses. This research shows the dynamic characteristics with various tooth modifications in its type and quantity.

• 한국소음진동공학회논문집
• /
• 제13권9호
• /
• pp.688-693
• /
• 2003

To reduce the vibration of a gear driving system. the modification of gear tooth from the orignal involute gear profile is usually done in gear manufacturers. The quantity of tooth modification has been decided on the basis of the interference between two gear teeth during gear meshing and the elastic deformation due to loading. However. the dynamic characteristics with tooth modification has to be investigated to avoid the instability to the variation of gear meshing stiffness and the nonlinearity due to gear backlash which results in sub- or super-harmonics in its responses. This research shows the dynamic characteristics with various tooth modifications in its type and quantity.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.249-250
• /
• 2013

• Tribology and Lubricants
• /
• 제18권6호
• /
• pp.418-424
• /
• 2002

The basic concept of ‘gear profile modification’ is to change a part of the involute profile to reduce the load in that area and appropriate profile modifications can help gears to run quietly and resist scoring., pitting, and tooth breakage. In this study, the modification of tooth profile to make a smooth transmission of the normal loads in spur gears has been developed. The modified tooth profile has been determined by the total deflection at contact points. We also compared our results with other experimental results.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.28-31
• /
• 2002

In this study, we develop automatic design program, which create 3D model of spur gear and helical gear used VisuaILISP and create helical gear in the CATIA using 2D profile of gear. This model become the standard model, which give not only in itself mold information but also computer processed product with measuring date. Spur gear require mathematical examination of involute curve and trocoidal fillet curve. Automatic design program, which have a mathematical development create the profile of spur gear.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.591-594
• /
• 2002

In this study, we develop automatic design program, which create 3D model of spur gear and helical gear used VisualLISP and create helical gear in the CATIA using 2D profile of gear. This model become the standard models which give not only in itself mold information but also compare processed product with measuring date. Spur gear require mathematical examination of involute curve and trocoidal fillet curve. Automatic design program, which have a mathematical development create the profile of spur gear.

• Tribology and Lubricants
• /
• 제30권2호
• /
• pp.86-91
• /
• 2014

This paper presents a design procedure for a face gear and pinion used in a handpiece with a $160^{\circ}\acute{y}$ contra angle and 1:2 gear ratio. Based on the geometric theory of gearing, the tooth profile of the face gear and pinion is developed. To analyze the contact pressure, the gear profile should be determined before calculating the stress between the two gears. The concept of calculating the face gear profile is that it can be generated by the coordinate transformation of the shaper profiles, which have involute curves, using a simulation method from the gear manufacturing process.

• 대한기계학회논문집
• /
• 제15권1호
• /
• pp.127-138
• /
• 1991

본 연구에서는 인벌류트 치형을 갖는 헬리컬 기어압출에 있어서 실제 치형형 상인 인벌류트 곡선을 다이의 형상으로 하여 비대칭 형상의 다이를 몇 개의 대칭영역 으로 분할하고 각 영역에 대하여 각각의 동적가용 속도장을 구한 후 전체 형상으로 확 장시켜 상계해석 하였다. 해석결과의 계산은 위의 동적가용속도장으로 헬리컬 또는 평기어 압출을 해석하는 수치해석 프로그램을 개발하여 수행하였다. 상계해석에서는 기초원 이하의 필렛부분과 이 뿌리 틈새등은 그 형상이 매우 복잡하므로 해석의 간략 화를 위하여 기초원까지만 변형되는 것으로 가정하였으나 실제의 기어압출실험에서는 기어의 모든 조건이 고려되었다. 압출실험은 전기동으로 전극봉을 제조하고, 전극설 계시에 금형과 소재의 탄성변형량, 방전가공시의 과방전량 그리고 래핑 가공여유등을 고려하여 설계한 후 호빙 및 셰이빙가공하여 실제 제조하려는 기어와 유사하게 기어전 극을 제조한 후, 이를 금현본체와 조립하여 3축제어 방전가공기로 금형을 제작하였다.