• 조명전기설비학회논문지
• /
• 제24권5호
• /
• pp.70-76
• /
• 2010

유도 전동기의 인버터 사용이 증가하면서, 인버터의 고주파 스위칭에 대한 유도전동기의 특성 해석 연구가 요구되고 있다. 그러나 기존의 연구들은 인버터와의 결합 모델의 개발 필요성을 느끼고 있으면서도 인버터 모델링의 어려움뿐만 아니라 결합 어려움 때문에 고정된 전원을 가정하고, 유도기 모델을 단순화 시켜서 모사를 하고 있는 경우가 대부분이다. 이에 인버터로 구동되는 유도 전동기의 고주파 해석 모델과 고주파 고려 유도 전동기 해석 모델 및 인버터 동작을 시뮬레이션할 수 있는 모델을 개발하여, 위와 같은 경우의 시뮬레이션을 가능하게 하고자 한다. 이로부터, 인버터에 의한 유도전동기 구동에서의 고주파에 의한 영향을 해석할 수 있다.

• Journal of information and communication convergence engineering
• /
• 제6권3호
• /
• pp.305-309
• /
• 2008

This paper presents an innovative prototype of a new conceptual electromagnetic induction eddy current based fluid heating appliance using voltage-fed quasi resonant zero voltage soft switching PWM high-frequency inverter using IGBTs, which can operate at a constant frequency variable power regulation scheme. The promising simple high efficient low noise inverter type electromagnetic induction eddy current based pipeline fluid heating appliance is proposed for saturated steam generator, superheated steam generator, hot water and hot air producer, metal catalyst heating for exhaust gas cleaning in engine. Under these technological backgrounds, a novel electromagnetic induction eddy current Dual Packs Heater(DPH) based pipeline fluid heating incorporates thin metal layer type package for continuous fluid heating appliances applying two types of voltage-fed quasi load resonant ZVS-PWM high frequency inverter. The unique features of a novel electromagnetic induction eddy current DPH based continuous pipeline fluid heating appliance is illustrated on the basis of simulation and discussed for the steady state operating characteristics and experimental results.

• KIEE International Transactions on Power Engineering
• /
• 제5A권1호
• /
• pp.22-30
• /
• 2005

The PWM inverter drive may cause an over voltage at the motor terminal, which imposes severe electric stresses on the inter-turn insulation of motor windings. Unlike low-voltage induction motors, high-voltage induction motors have a stator type of form-wound coil for insulation and are insulated to the slot and the coil. So, this paper presents a PWM 3-level inverter, H-Bridge cascaded 7-level inverter and High-voltage induction motor model. It then analyzes the voltage that generates at the input terminal of the high-voltage induction motor fed by each inverter. Also, in order to examine a factor that influences the switching surge voltage, this paper proposes the system equivalent model and performs the case studies using EMTP.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.337-340
• /
• 1988

This paper describes a fast response control of an inverter-fed induction Motor. The transfer function of the induction Motor controlled by this control method ie very similar to that of a separately exited dc motor. This paper presents the linear control method for the transfer function in the control of an inverter-fed induction motor, Acceding to this control, the response speed is correctly grasped faking the leakage inductances into account and the inverter-fed induction motor is controlled with fast response.

• 한국철도학회논문집
• /
• 제2권2호
• /
• pp.39-45
• /
• 1999

This paper presents the current-fed inverter of a TGV-K traction system with thyristor switches using phase control and commutation techniques. The current-fed inverters have two modes of operation which consist of forced commutation and natural commutation. In forced commutation mode, at speed of less than 120km/h, commutation is forced by means of the commutation capacitors and the thyristors. Above 120km/h, the thyristors operate in natural commutation mode. according to the voltages between phases of the motors. In this paper. the power conversion theory of the TGV-K traction system and the control principle of the converter and current-fed inverter are discussed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.583-586
• /
• 1989

All Inverter fed induction motor systems which the switching patterns are determined by the approximated sinusoidal modulation techniques have many troublesome problems such as the current ripple duing to harmoic components. Therefore, in this paper, the current and torque pulsations for a inverter fed induction motor drive system are analyzed and specified theoretically and the determination techniques of optimal switching patterns for minimization of these factors are presented. Also, these simulation results are compared to the ones obtained from the realized experimental system by one-chip microcomputer, 8751.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 A
• /
• pp.6-8
• /
• 1997

This paper describes on the dynamic characteristic analysis of a inverter-fed linear synchronous motor with surface type permanent magnet using time-stepped finite element method. We can certify that the proposed simulation method can be used at the dynamic characteristic analysis of other inverter-fed linear motor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.73-75
• /
• 1999

The time harmonics of an inverter output voltage cause high frequency currents in the rotor bars of a squirrel cage induction motor, so that the harmonic copper loss density increases in the upper lesion of the bars. Such an higher loss density makes an nonuniform thermal source and deforms the bars due to the thermal stress. Therefore, in this paper, the copper loss distribution in the rotor bar of an inverter-fed induction motor, which is the source of the thermal stress, is analyzed by the time-stepping finite element method. As a result, the harmonic copper losses of 11 subregions in a bar are calculated and compared with those of sinusoidally fed induction motor.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.255-258
• /
• 1996

This paper describes a DC voltage controller for the DC power supply which is constructed using the full-bridged MOS-FET DC-to-RF power inverter and rectifier. The full-bridged MOS-FET DC-to-RF inverter consisting of four MOSFET arrays and an output power transformer has a control function which is able to control the RF output power when the widths of the pulse voltages which are fed to four MOS-FET arrays of the fall-bridged inverter are changed using the pulse width control circuit. The power conversion efficiency of the full-bridged MOS-FET DC-to-RF power inverter was approximately 85 % when the duty cycles of the pulse voltages were changed from 30 % to 50 %. The RF output voltage from the full-bridged MOS-FET DC-to-RF inverter is fed to the rectifier circuit through the output transformer. The rectifier circuit consists of GaAs schottky diodes and filters, each of which is made of a coil and capacitors. The power conversion efficiency of the rectifier circuit was over 80 % when the duty cycles of the pulse voltages were changed from 30 % to 50 %. The output voltage of the rectifier circuit was changed from 34.7V to 37.6 V when the duty cycles of the pulse voltages were changed from 30 % to 50 %.

• 전력전자학회논문지
• /
• 제10권4호
• /
• pp.339-346
• /
• 2005

본 논문에서는 3-레그 2상 인버터의 새로운 PWM방식을 제안하였다. 기존의 3-레그 인버터의 PWM방식은 전형적인 SVPWM 방식을 적용하여 PWM 방식이 복잡하다. 3-레그 2상 인버터를 "중성점이 있는 4-레그 인버터"의 등가회로라고 할 때 3-레그 인버터에서 형성되는 6개의 섹터는 4개의 섹터로 축소되며, 각 영역에서는 SYPWM 방식 대신 단순화된 정현파형 PWM방식을 적용할 수 있다. 각 레그의 스위치마다 스위칭 시간을 계산하는 스위칭 패턴을 제시하였다. 제안된 ,3-레그 인버터의 PWM방식에 대한 타당성을 확인하기 위해 모의 실험과 실험이 실행되었다.