• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.581-586
• /
• 2000

Gas metal arc welding(GMAW) uses a continuously fed electrode as a filler metal. The arc is shielded from atmospheric contamination by an inert gas active or inert/active gas mixture delivered through the welding gun and cable assembly. The recent research topics on $CO_2$ are welding machines are focused mainly on the reduction method of generated spatter by using new type consumable electrode metal or inverter control method. The various current waveform control methods have been researched for welding performance improvement. Until now current waveform control methods reduce to spatter occurred by instantaneous short circuiting,. but these methods is drawback that no reduce spatter occurred by arc reignition. In this paper the previous arc reignition current control method for welding performance improvement of inverter arc welding machine is studied and compared the various current control methods with the previous arc reignition current control method.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.420-423
• /
• 1995

The electric arc welding machine with high-frequency inverter is studied in this paper which could make more saving in energy than conventional ones with inherent low efficiency. The inverter circuit has been already adopted to special welding machines such as MIG and TIG for improving operating performances so much. But this adoption has not be applied to conventional ac arc welding machine until now. The proposed technology for higher efficiency is to apply the high frequency inverter, together with noise-cut transformer. Overall output characteristics are investigated in aspect of cost and circuit performance. The proposed system is conducted practical experiments using PWM controller.

• Journal of Power Electronics
• /
• v.7 no.3
• /
• pp.181-190
• /
• 2007

This paper presents a novel circuit topology of a DC bus line series switch and parallel snubbing capacitor-assisted soft-switching PWM full-bridge inverter type DC-DC power converter with a high frequency planar transformer link, which is newly developed for high performance arc welding machines in industry. The proposed DC-DC power converter circuit is based upon a voltage source-fed H type full-bridge soft-switching PWM inverter with a high frequency transformer. This DC-DC power converter has a single power semiconductor switching device in series with an input DC low side rail and loss less snubbing capacitor in parallel with the inverter bridge legs. All the active power switches in the full-bridge arms and DC bus line can achieve ZCS turn-on and ZVS turn-off transition commutation. Consequently, the total switching power losses occurred at turn-off switching transition of these power semiconductor devices; IGBTs can be reduced even in higher switching frequency bands ranging from 20 kHz to 100 kHz. The switching frequency of this DC-DC power converter using IGBT power modules can be realized at 60 kHz. It is proved experimentally by power loss analysis that the more the switching frequency increases, the more the proposed DC-DC power converter can achieve a higher control response performance and size miniaturization. The practical and inherent effectiveness of the new DC-DC converter topology proposed here is actually confirmed for low voltage and large current DC-DC power supplies (32V, 300A) for TIG arc welding applications in industry.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.4
• /
• pp.358-369
• /
• 2000

Shielded metal arc welding machines with AC transformer have been widely used for thin-plate welding applications. Because of being bulky, heavy and of tap-changing property, so the SMAW's are changing to new power electronic circuits such as inverter circuit in order to reduce the system size and also to improve the welding performances at input output sides. The PWM inverter arc welding machine with diode rectifier has better output welding performances but it is has the plentiful harmonics and the lower input power factor. To solve these problems, input current-controlled scheme is considered for PWM inverter arc welding system, and then total input power factor is maintained to be more than 99%. Also a new combined control is proposed which can control both instantaeous welding output voltage and current under constant power condition, and as a result the variations of instantaneous current and voltage can be reduced to very narrow range in the V-I curve relationship, and hence the variance of welding current and voltage become so reduced. In addition the spatter generated during welding process is greatly reduced up to 70%. And the overall effiency can be improved up to 10%, which becomes higher when the load is lower.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.24-24
• /
• 2009

현재 조선소를 비롯하여 각종 산업 전반적으로 기존의 SCR 용접기를 대체하여 용접품질이 우수한 인버터 용접기가 널리 사용되고 있는 실정이다. 그러나 기존 인버터 용접기의 전원은 Mono 타입으로 이루어져 있어 대용량 인버터 용접기의 경우 대용량 스위칭 소자가 요구되어 제조원가가 높다. 그리고 문제 발생 시 용접기의 사용이 불가능하게 된다. 개발된 단위모듈을 병렬로 연결하여 대용량 용접기를 구성하게 되면 제조원가를 절감할 수 있으며 병렬로 연결되어 단위 모듈에 문제가 발생하여도 계속적인 사용이 가능하고, 주 회로를 작은 용량으로 분산시켜 전력을 제어하므로 높은 에너지 효율을 가지게 된다. 또한 인버터 용접기의 가장 중요한 성능인 스위칭 주파수에 있어서도 기존의 인버터 용접기는 20kHz의 스위칭 주파수를 가지지만 본 기술은 낮은 전력을 병렬로 연결하여 대용량을 동시에 제어가능 하므로 약 70kHz의 고속제어가 가능하다. 본 연구에서는 개발된 용량 170A단위모듈을 병렬로 연결하여 단위모듈 집적형 인버터 아크용접기 510A, 680A급의 부하테스트 실시 및 기본출력특성에 대하여 실험하였으며, GMAW에서 ${\Phi}1.6$ 솔리드 와이어를 이용하여 두께 20t의 후판 맞대기 용접에 적용실험을 실시하였다. 그 결과 모든 전류영역에서의 부하특성 및 출력특성이 양호하게 나타났으며, 후판 맞대기 용접에서는 SAW에 버금가는 생산성과 용접특성을 얻을 수 있었다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.4
• /
• pp.60-67
• /
• 2008

This paper presents a new full-bridge soft switching PWM DC-DC converter circuit topology that adding two switcher, two lossless snubber quasi-resonance capacity, two diode to power source for general welding machine. This half bridge soft switching Is low voltage hight current output that first coil current is smaller than second coil current in high frequency transformer can be obtained with decreasing path loss in conventional DC bus line switcher. As it operate ZCS/ZVS in full range, high frequency, high efficiency and high output are implemented at low voltage and high DC current switching power supplies. All of this items are got from simulation and the result of experiment. If make up for the weak points of this proposed circuit, it will be used more easily for next generation TIG, MIG and MAG type of arc-welding machine.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.6
• /
• pp.26-33
• /
• 2008

This paper presents a new full-bridge soft switching PWM DC-DC converter circuit topology that adding one switcher, one lossless snubber quasi-resonance capacity to power source for general welding machine This full-bridge soft switching DC-DC convoter· topology can applicable 600[V] switching device (IGBT)incase of AC 400[V] common power source because the voltage of active switcher is 1/2 of DC bus line voltage. And low voltage hight current out)ut that first coil current is smaller than second coil current in high frequency transformer can be obtained with decreasing path loss in conventional DC bus line switcher. As it operate ZCS/ZVS in full range, high frequency, high efficiency and high output are implemented at low voltage and high DC current switching power supplies. All of this items are got from simulation and the result of experiment. If make up for the weak points of this proposed circuit, it will be used more easily for next generation TIG, MIG and MAG type of arc-welding machine.

• Journal of Welding and Joining
• /
• v.17 no.5
• /
• pp.61-68
• /
• 1999

For the last two decades, waveform control techniques have been successively developed and applied for the inverter welding machines resulting in the substantial reduction of spatter generated in CO₂ welding. One of the constituents commonly involved in those techniques is to delay the instant of current increase to some extent after the initiation of short-circuiting. Although this technique has been known to be quite effective in reducing the spatter generation through the suppression of is instantaneous short circuiting, the delay time necessary for minimum spatter has not been clearly understood. In this study, the control system for varying the delay time was constructed so that the spatter generation rates could be measured over a wide range of delay time, 0.29-2.0 msec. As a result of this study, it was demonstrated that spatter generation rate(SGR) sharply decreased at delay time of 0.6 msec and longer accompanied with the change in characteristics of short circuit mode from the instantaneous short-circuiting(ISC) dominant to normal short-circuiting(NSC) dominant. Another feature that have been found in current waveform of over 0.6msec was the creation of current pulse right after the arc reignition stage. Because of this current pulses weld pool oscillated in wave-like fashion and it looks like to play an important role in developing short circuiting between electrode and weld pool.