• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.415-420
• /
• 2003

This Study is performed to analyze the behavior of inverted T-shaped Composite Basement Wall(CBW). For this, it is purposed to analyze the failure mechanisms of inverted T-shaped composite basement wall and propose the method of evaluating strength for design. The failure mechanisms would be devided into 4 type mechanisms from previous experimental results, that is hanger failure, punching shear failure, flexural failure and the buckling of H-pile. A strength evaluation procedure for CBW is induced by analyzing respective failure mechanism. Then, the strength for actual structure consisted of inverted T-shaped composite basement wall was evaluated and the expected failure mechanism was determined.

• 한국지진공학회논문집
• /
• 제20권1호
• /
• pp.9-19
• /
• 2016

Permanent deformation plays a key role in performance based earthquake resistant design. In order to estimate permanent deformation after earthquake, it is essential to secure reliable response history analysis(RHA) as well as earthquake scenario. This study focuses on permanent deformation of an inverted T-type wall under earthquake. The study is composed of two separate parts. The first one is on the verification of RHA and the second one is on an effect of input earthquake motion. The former is discussed in companion paper and the latter in this paper. In order to investigate the effect of an input earthquake motion on the permanent deformation, three bins of spectral matched real earthquake records with different magnitude, regions, epicentral distance are constructed. Parametric study was performed using the verified RHA through the companion paper for each earthquake records in the bins. The most influential parameter affecting permanent displacement is magnitude. The other parameters describing earthquake motion are not significant enough to increase permanent displacement of the inverted T-type wall except for energy related parameters(AI, CI, SEI).

• 한국지진공학회논문집
• /
• 제16권2호
• /
• pp.35-45
• /
• 2012

본 논문에서는 지진시 역 T형 옹벽에 작용하는 기초 접지압의 변화를 Mononobe-Okabe공식을 이용하는 기존의 유사정적 설계기법과, 지반의 비선형 부지증폭현상 고려한 유한차분해석을 이용하여 살펴 보았다. 옹벽 설계에 있어서 높이 10m를 초과하는 역 T형 옹벽의 경우 상시 안정조건을 만족함에도 불구하고 지진시 지지력 안정조건을 만족하지 못하는 경우가 발생한다. 안정조건을 만족시키지 못하는 주요 원인은 동토압으로 야기되는 편심하중 증가로 인한 기초 유효저면적의 감소이다. 본 논문에서는 역 T형 옹벽의 지진시 유효저면적의 변화를 유한차분해석프로그램(FLAC)을 이용하여 살펴보았으며, 그 결과로부터 동적지지력 계수의 설계 적용성을 검토하였다.

• 한국지진공학회논문집
• /
• 제20권1호
• /
• pp.1-8
• /
• 2016

Permanent deformation plays a key role in performance based earthquake resistant design. In order to estimate permanent deformation after earthquake, it is essential to secure reliable response history analysis(RHA) as well as earthquake scenario. This study focuses on permanent deformation of an inverted T-type wall under earthquake. The study is composed of two separate parts. The first one is on the verification of RHA and the second one is on an effect of input earthquake motion. The former is discussed in this paper and the latter in the companion paper. The verification is conducted via geotechnical dynamic centrifuge test in prototype scale. Response of wall stem, ground motions behind the wall obtained from RHA matched pretty well with physical test performed under centrifugal acceleration of 50g. The rigorously verified RHA is used for parametric study to investigate an effect of input earthquake motion selection in the companion paper.

• 대한토목학회논문집
• /
• 제41권5호
• /
• pp.533-541
• /
• 2021

옹벽 구조물은 철도, 도로, 원자력 발전소, 댐, 하천 시설 등 토압 저항을 통한 사면 붕괴방지에 활용된다. 동토압 산정 및 지진시 거동에 대한 특성을 파악하기 위해 많은 연구자들은 다양한 수치해석 프로그램(FLAC, PLAXIS, ABAQUS 등)을 활용하여 동적 하중에 대한 구조물과 지반의 비선형 거동을 분석하고 있다. 또한, 구조물의 지진에 대한 안전성을 확보하기 위해 지진취약도 곡선을 산정하여 확률론적 지진안전성 평가를 수행하고 있다. 본 연구에서는 수치해석프로그램 FLAC2D를 활용하여 뒷채움토의 사면 경사도가 있는 역T형 옹벽의 지진거동 특성을 파악하고, 옹벽 벽체의 상대적인 수평변위를 고려하여 지진취약도 평가를 수행하였다. 다양한 지진하중을 고려하기 위해 암반에서 계측된 7개의 지진파를 활용하여 각 지반특성 별(S2, S4) 비선형 지반응답해석을 수행하였고, 산정된 지진파의 크기를 5가지(0.1, 0.3, 0.5, 0.7, 0.9 g의 최대지반가속도)로 조정하였다. 본 연구에 활용된 수치해석 모델은 다른 수치해석결과와 실험결과, 주동토압 산정식을 활용하여 비교 검증하였다. 옹벽 높이에 대한 상대수평변위를 손상지수로 고려하여 옹벽의 손상상태를 결정하여 지진취약도 곡선을 산정하였다. 상대적으로 깊고 토층 평균 전단파 속도가 느린 S4 지반에서 S2 지반보다 옹벽 벽체의 수평 변위에 대한 지진취약도가 크게 산정되었음을 확인하였다.

• Geomechanics and Engineering
• /
• 제13권1호
• /
• pp.43-61
• /
• 2017

The inverted T-type abutments are generally used in highway bridges constructed in Korea. This type of abutment is used because it has greater stability, with more pile foundations embedded in the bedrock, while simultaneously providing support for lateral earth pressure and vertical loads of superstructures. However, the cross section of inverted T-type abutments is large compared with the piers, which makes them more expensive. In addition, a differential settlement between the abutment and embankment, as well as the expansion joints, causes driving discomfort. This study evaluated the driving comfort of several types of abutments to improve driving comfort on the abutment. To achieve this objective, a traditional T-type abutment and three types of candidate abutments, namely, mechanically stabilized earth wall (MSEW) abutment supported by a shallow foundation (called "true MSEW abutment"), MSEW abutment supported by piles (called "mixed MSEW abutment"), and pile bent and integral abutment with MSEW (called "MIP abutment"), were selected to consider their design and economic feasibility. Finite element analysis was performed using the design section of the candidate abutments. Subsequently, the settlements of each candidate abutment, approach slabs, and paved surfaces of the bridges were reviewed. Finally, the driving comfort on each candidate abutment was evaluated using a vehicle dynamic simulation. The true MSEW abutment demonstrated the most excellent driving comfort. However, this abutment can cause problems with respect to serviceability and maintenance due to excessive settlements. After our overall review, we determined that the mixed MSEW and the MIP abutments are the most appropriate abutment types to improve driving comfort by taking the highway conditions in Korea into consideration.