• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.1
• /
• pp.40-48
• /
• 2015

In this paper, we suggest a measurement modeling of the RF seeker using the ISAR(Inverse Synthetic Aperture Radar) image. Reference scattering points are extracted first from ISAR images which are changed according to target attitude. And then uncertainties included in RF seeker measurement such as noise strength, blink, and boresight error are added to the reference scattering points. The proposed measurement model of the RF seeker can be used to develop various kinds of target tracking algorithms.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.4
• /
• pp.451-458
• /
• 2014

This paper introduces a bistatic ISAR imaging technique. In bistatic geometry, the transmitter and receiver are placed in different locations. The monostatic ISAR is inadequate not only for obtaining images on targets approaching along the radar's line of sight, but also for stealth targets. In this paper, geometry, signal modeling as well as bistatic Doppler for bistatic ISAR are introduced to address these problems. Simulations results show bistatic ISAR images as well as monostatic ISAR images against target's moving scenarios, and analyze their differences for each scenario.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.8
• /
• pp.670-677
• /
• 2017

In this paper, we propose a rotational motion compensation(RMC) for bistatic inverse synthetic aperture radar(Bi-ISAR) imaging. For this purpose, geometry-error, caused by changes of bistatic-angle, is removed using known position information of a transmitter, a receiver, and target trajectories. Next, RMC is performed to compensate non-uniform rotational motion error by reformatting radar signal in terms of a newly defined slow time variable that converts non-uniform rotational motion into uniform one. Simulation results using an aircraft model composed of ideal point scatterers validate the efficacy of the proposed Bi-ISAR RMC method.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.2 s.17
• /
• pp.88-99
• /
• 2004

A development of a software on radar target signature analysis is presented in this paper The target signature includes Radar Cross Section(RCS) prediction, Range Profile(RP) processing and Inverse Synthetic Aperture Radar(ISAR) processing. Physical Optics(PO) is the basic calculation method for RCS prediction and Geometrical Optics(GO) is used for ray tracing in the field calculation of multiple reflection. For RP and ISAR, Fast Fourier Transform(FFT) and Matrix Pencil(MP) method were implemented for post-processing. Those results are integrated into two separate softwares named as Radar Target Signature Generator(RTSG) and Radar Target Signature Analyser(RTSA). Several test results show good performances in radar signature prediction and analysis.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.2
• /
• pp.218-225
• /
• 2015

Inverse synthetic aperture radar(ISAR) is coherent imaging system formed by conducting signal processing of received data which consists of radar cross section(RCS) reflected from maneuvering target. A novel algorithm is proposed to compensate inter-pulse motion(IPM) for the purpose of forming an well-focused ISAR image through signals generated by stepped chirp waveform( SCW). The velocity and acceleration of the target related to IPM are estimated based on particle swarm optimization (PSO) which has been widely used in optimization technique. Furthermore, a modified PSO which enables us to improve the performance of PSO is used to compensate IPM in a very short-time. Simulation results using point scatterer model of a Boeing-737 aircraft validate the performance of the proposed algorithm.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.5
• /
• pp.566-573
• /
• 2013

Inverse synthetic aperture radar(ISAR) images have been widely used in non-cooperative target recognition(NCTR). One of the most important issues in ISAR imaging is the improvement of the image smeared by target motion. In this paper, we propose the discrete Gabor representation(DGR) in an oversampling scheme for efficient acquisition of high-quality ISAR images. The DGR compartmentally assigns the Gabor coefficients to unit cells of the time-frequency grid related to the given Gabor logons. Thus, it can show an excellent time-frequency concentration and effectively discriminates the Doppler components from point-scatterers. The simulation results demonstrated that the DGR not only obtained high-quality ISAR images but also retained computational efficiency.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.550-553
• /
• 2005

To acquire radar target signature, various kinds of target are necessary. Measurement is one of the data acquiring method, but much time and high cost is required to get the target data from the real targets. Even if we can afford that, the targets we can access are very limited. To obtain target signatures avoiding these problems, we build the target CAD (Computer Aided Design) model for the calculation of target signatures. To speed up RCS calculation, we applied adaptive super-sampling and tested quite complex tank CAD model which is 1.4 hundred of thousands facet. We use calculated RCS data for ID range profile and 2D ISAR (Inverse Synthetic Aperture Radar) image formation. We adopted IFFT (Inverse Fast Fourier Transform) algorithm combined with polar formatting algorithm for the ISAR imaging. We could confirm the possibility of the construction of database from the images of CAD models for target classification applications.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.2
• /
• pp.189-195
• /
• 2015

There are many research works on the SAR image generation using EM(Electro Magnetic) simulation. Particularly, there are several dedicated S/Ws for SAR image generation and analysis. But, most of them are not available to the public due to the reason for defense and security. In this paper, we describe the generation of ISAR images for a realistic target model using the general purpose EM simulator like FEKO. This method can benefit us many advantages like building the database of many targets for target recognition with cost-and-time effective way.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.17 no.1
• /
• pp.67-76
• /
• 2022

Monostatic/Bistatic inverse synthetic aperture radar (ISAR) images are two-dimensional radar cross section (RCS) distributions of a target. When there are many targets in a single radar beam, ISAR images are generated with targets overlapped, so it is difficult to perform the targets identification using the trained database. In addition, it is inefficient to perform target identification using only single monostatic and bistatic ISAR images separately because each method has its own advantages and weaknesses. Therefore, this paper analyzes multiple targets identification performances using monostatic/bistatic ISAR images and proposes a method of identification through fusion of two ISAR images. To identify multiple targets, we use image combination technique using trained single target images. Simulation results show effectiveness of proposed method.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.8
• /
• pp.97-103
• /
• 2014

Signal processing technique of linear frequency modulation-frequency shift keying (LFM-FSK) waveform has been introduced for rear view radars of an automobile. LFM-FSK waveform consists of two sequential stepped frequency waveforms with some frequency offset, and thus, can be used to generate inverse synthetic aperture radar (ISAR) images of rear view target of an automobile. However, ISAR images can often be blurred due to inter-pulse phase errors. To resolve this problem, one-dimensional (1-D) entropies of high resolution range profiles (HRRP) are minimized with the help of particle swarm optimization (PSO). The searching space used in PSO is adaptively adjusted by the use of information on the target's velocity obtained from LFM-FSK waveforms. Simulation results show that the proposed method can generate well-focused ISAR images.