• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제38권
• /
• pp.12.1-12.6
• /
• 2016

Background: Temporomandibular joint (TMJ) ankylosis can be accompanied by various degrees of functional and esthetic problems. Adequate mouth opening, occlusal stability, and harmonious facial form are the main goals of treatment for ankylosis. Distraction osteogenesis has proven to be an excellent treatment for lengthening the ramus-condyle unit. However, various timings for distraction have been suggested, and there is no consensus on selection criteria for performing the procedure in stages or simultaneously with other treatments. Case presentation: In this case report, concomitant intraoral distraction and gap arthroplasty was planned to treat TMJ ankylosis and associated facial asymmetry. After gap arthroplasty and 23 mm of distraction, the ramus-condyle segment was successfully lengthened and mouth opening range was significantly increased. The resultant interocclusal space was stably maintained with an occlusal splint for 4 months after distraction. Finally, good occlusion was achieved after prosthetic treatment. The remaining mandibular asymmetry was corrected with osseous contouring and augmentation surgery. The mouth-opening range was maintained at 35 mm 24 months after treatment. Conclusion: Gap arthroplasty with intraoral distraction as a one-stage treatment and subsequent contouring surgery can be applied to correct ankylosis with moderate malocclusion and facial asymmetry.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제23권4호
• /
• pp.324-331
• /
• 2001

The present study was aimed to investigate the effects of latency period on alveolar ridge distraction using the intraoral distraction device. Nine adult mongrel dogs of either sex, weighing about 15kg, were used. They were divided into 3-day, 5-day, and 7-day groups according to the latency period. The left upper and lower premolars and first molars were extracted. Twelve weeks after the extraction, an osteotomy was performed and the distraction device was applied. After the latency period, the distraction was applied at a rate of 1.2mm for 8 days. The distraction device was left in place for 2 weeks to allow consolidation and was then removed. The animals were sacrified at 8 weeks after completion of distraction and were examined macroscopically, radiographically, and histologically. After completion of the distraction, the alveolar crest protruded prominently, showing the vertical augmentation of the alveolar bone. Soft tissues were broken down after the 6th day of distraction in 3-day latency group, and premature union occurred on the 7th day of distraction in the 7-day latency group. The average distance was $9.40{\pm}0.3mm$ in 3-day latency group, $9.35{\pm}0.1mm$ in 5-day latency group, and $8.85{\pm}0.1mm$ in 7-day latency group. In the radiograph taken at 8 weeks after distraction, there was slight bone resorption around the medial and distal edges of the alveolar bone segment, and a new bone deposition was observed in the neighboring alveolar crest area in all groups. Fibrous tissues were present in a part of the buccal cortical bone area of the distraction gap, and the woven and lamellar bones were observed in the distracted gap. There were bony bridges in the distraction gap in all animals examined. These results suggest that optimal time of latency period on alveolar ridge distraction using the intraoral distraction device is about 5 days in dogs, and about 7days in human beings.

• 대한구순구개열학회지
• /
• 제7권1호
• /
• pp.63-76
• /
• 2004

Cleft lip and palate(CLP) patients usually have midface deficiency and Class III malocclusion. Distraction osteogenesis (DO) has been used recently to correct the maxillary hypoplasia with stable and predictable result. Both external and internal devices that permit midface distraction are available, This case report describes intraoral DO for correction of the midface deficiency in a adult CLP patient with relapse following orthognathic surgery. The purpose of this report is to present advantages of the intraoral DO for the treatment of CLP, The relative and potential clinical indications, treatment planning, patient preparation, and possible vector control for DO are discussed.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제31권4호
• /
• pp.325-329
• /
• 2009

Objective : This is to report the effectiveness of intraoral distraction osteogenesis, iliac bone graft for alveolar augmentation in the extremely atrophied alveolar defects after infected allobone grafted area. Subjects and Methods : Anterior segmental osteotomy was performed and the trans-oral alveolar distractors (Martin, Germany) were applied in patient with the severe acquired anterior mandibular and mandibular defect after ameloblastoma enucleation. Iliac bone grafts were performed in defect sites and distraction osteogenesis were treated. After latent period for 1 week, the osteomized alveolar segments were distracted by 0.75 mm a day (0.25 mm/1 turn) for 10 days The consolidation period was about 12 weeks. Thereafter, 2 titanium threaded implants were simultaneously installed with removal of distractor. For oral rehabilitiation, The implants were installed in maxilla, mandible. It was tested with clinically and radiographically. Results : Amounts of acquired alveolar bone were 10 mm with the increased width of the ridge crests and soft tissue expansion. Dental implants installated on the augmented alveolar ridges in 12 weeks after distraction were confirmed as in good osseointegration and in good function without any complications. Conclusion : Intraoral distraction osteogenesis can be a good option for alveolar ridge augmentation of the severely atrophied ridges and soft-tissue defects.

• 한국융합학회논문지
• /
• 제7권6호
• /
• pp.75-80
• /
• 2016

악골기형에 따른 외과적 치료방법은 상악골 또는 하악골을 직접 늘리거나 줄이는 방식을 이용한다. 골신장술(distraction osteogenesis)은 열성장한 악골에 치밀뼈절단술(corticotomy)을 시행한 후, 골신장기(jaw bone distractor)를 사용하여 간헐적인 힘을 골에 부과하며 골의 길이를 늘여주는 대표적인 방법이다. 그러나 이러한 골신장기는 피부를 관통한 채 골에 고정되기 때문에, 비심미적이며 감염이나 흉터 등의 많은 문제점이 발생한다. 이 연구에서는 구내형 골신장기(intraoral jaw bone distractor) 개발을 위해 유한요소분석을 시행하여 핵심구동부의 안정성을 시뮬레이션한 후, 골신장기를 제작하였다. 융합연구를 통하여 향후 무선형 골신장기를 제작하기 위한 기반 자료를 구축하였으며, 관련 자료는 골신장술의 근본적인 문제점을 해결할 수 있는 가능성을 제시하며, 제반 기술은 다양한 의료기기 개발 기술에 활용될 수 있다

• 대한구순구개열학회지
• /
• 제7권2호
• /
• pp.107-121
• /
• 2004

Midface and maxillary distraction osteogenesis (DO) can be an alternative treatement modality for the craniofacial syndrome patients and cleft lip and palate patients. Rigid External Distraction (RED) II system has more advantages in the force vector control than the other types of distraction systems. Despite of increasing popularity of RED system there is few report on the failure factors. Some considerations should be pointed out in using RED II system for successful treatment; the rigidity of intraoral splint, complete separation of bony segment, and the cooperation of patients. Orthodontists, surgeons, and patients have the same amount of responsibility for the successful midface and maxillary DO using RED II system from the beginning to the end of the treatment.

• 대한구순구개열학회:학술대회논문집
• /
• 대한구순구개열학회 2005년도 제9회 종합학술대회 및 정기총회
• /
• pp.19-21
• /
• 2005

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제26권3호
• /
• pp.238-244
• /
• 2000

The present study was aimed to investigate the effect of osseointegration according to implant placement timing in the distracted alveolar bone using intraoral distraction device. Six adult mongrel dogs of either sex, weighing about 15kg, were used. The animals were divided into 4-week and 8-week groups according to the timing of implant installation. The left upper and lower premolars and first molars were extracted and an alveoloplasty was performed to simulate an atrophic ridge. After 12 weeks of healing, a segmental osteotomy was made and an intraoral distraction device which was designed for augmentation of vertical height of the edentulous ridge was applied. Latency period was allowed for 5 days and then distraction was made at a rate of 1.2mm/day for 8 days. Four or eight weeks after distraction, implants were installed. Twelve weeks after implant installation, the animals were sacrificed. Macroscopic, radiographic, and histologic examinations of distracted alveolar ridge were performed. No significant abnormalities such as infection and dehiscence of overlying soft tissue were observed. Radiographically, there was slight bone resorption around the medial and distal edges of the alveolar bone segment, and a new bone deposition was observed in the neighboring alveolar crest area in the both groups. The satisfactory osseointegration was achieved in the distracted gap of the both groups, but fibrous tissue appeared on the buccal side of implant in the distracted gap in 4-week group. These results suggest that proper timing of implant installation is 8 weeks rather than 4 weeks after distraction when dental implant is to be placed onto the distracted bone.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제22권2호
• /
• pp.254-261
• /
• 2000

Since callus distraction technique was applied clinically for the correction of dentofacial deformity to the patients with hemifacial dysplasia by McCarthy in 1992, many surgeons have tried to apply this method to the maxillofacial region. But this technique has some drawbacks. One of the disadvantages of this technique is extensive scar formation in the facial area, which is a sequelae of extraoral approach for supraperiosteal dissection of the periosteum overlying the mandible. Recently, we have made an effort to perform this technique through intraoral approaches to prevent scar formation on the submandibular area and modified the design of the osteotomy, that is step osteotomy technique, to increase the raw bone surface on both osteotomized segments. The rationale for the application of this step osteotomy technique is to increase the amount of regenerated bone and the length of distraction, to avoid damage of inferior alveolar neurovascular bundle, and to increase initial stability of the splitted segments. Step osteotomy procedure can be done with fine micro-osteotomy saw through subperiosteal tunneling. Extraoral pins should be inserted before making the osteotomy. Since 1994 we have applied this technique at 8 sites In 5 patients with mandibular deficiencies: 2 cases of hemifacial microsomia, 1 case of developmental facial asymmetry and 2 cases of mandibular bony defect. Mandibular elongation have been achieved from 12 to 20mm in length. 1 out of 8 site, we experienced non-union in the case of mandibular body defect. Some skeletal relapse and growth retardation phenomenon have been observed in some cases with the longest follow-up of 48 months.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제28권4호
• /
• pp.329-338
• /
• 2006

Objectives: Distraction osteogenesis has recently evolved a challenging technique to overcome the limitations of conventional augmentation procedures. The aim of this report was to evaluate the clinical result of alveolar distraction osteogenesis for implant installation. Methods: Twenty five patients with alveolar ridge deficiencies were treated with vertical alveolar distraction osteogenesis by intraoral device (total 27 devices: 25 extraosseous and 2 intraosseous devices). After the latency periods of 5-7 days, activation of the device was started. The distraction rhythm and rate was 0.75-1.0 mm a day with 2 or 3 times a day. After 3-4 months, dental implants were placed with removing the distractor simultaneously. Results: On average, a vertical gain of $9.8{\pm}3.4\;mm$ was obtained by distraction osteogenesis. Total 84 implants were installed. Average follow up period was $13.5{\pm}7.5$ months. No implant was removed during the follow up period. Three patients showed infection during the distraction osteogenesis. Three devices were broken and 2 devices among them were replaced with new one. Conclusion: Relatively larger amount of alveolar bone augmentation could be obtained with distraction osteogenesis. For the ideal anatomically and functionally ideal regeneration of alveolar bone to install dental implant, the complication of distraction should be controlled.