• The Korean Journal of Health Service Management
• /
• v.5 no.1
• /
• pp.133-145
• /
• 2011

The purpose of this study is to analyze the influence of external environment, organizational characteristics on informatization level in hospital settings, and to provide suggestions to improve the informatizaiton level of strategic information system of hospitals. In order to achieve study purpose, causal model was developed and empirically tested. Data were collected from 716 managers of 89 hospitals keeping information system in Busan and KyungNam Province using self-administered structured questionnaire. Major results of this study were as follows; First, among hospitals which had information training programs, informatization capacity was significantly higher. Moreover, informatization capacity was significantly varied by ownership type, institutional level, and number of beds of hospitals. Second, environmental uncertainty, intra-industry competition intensity, decision-making concentration, work standardization variables and perceived benefits were found to be significant affecting factors on informatization capacity as a result of path analysis. Third, support of top-management and perceived benefits were found to be significant affecting factors on informatization capability as a result of path analysis. Especially, informatization capability was positively affected by informatization capacity. Finally, perceived benefits was found to be significant affecting factors on informatization competency as a result of path analysis. Especially, informatization competency was positively affected by informatization capability.

• International Journal of Contents
• /
• v.6 no.2
• /
• pp.59-68
• /
• 2010

This research looks close the effect of security agent's hierarchical leisure constraint on the leisure motivation and participation based on the Jackson's Model of the hierarchical leisure constraints. This research selected 420 people for sampling, designating security agents who work for security companies located in Seoul in 2009 at present as subjects by utilizing purposive sampling method, but the number of sampling used for ultimate analysis is 356. In this research, reliability analysis's and structural equation modeling's Maximum Likelihood method are used to prove the reliability and validity of questionnaire. By using these research method and procedures, the conclusion of this research is as following. First, intra-personal leisure constraint was affected by interpersonal, structural leisure constraint. Second, leisure motivation was affected negatively by leisure constraint. Third, leisure participation was affected positively by leisure motivation. Synthesizing all things referred above, leisure constraint was affected by inter-personal, structural leisure constraint, and in turn, leisure motivation and leisure participation were affected by its effects. It turned out that leisure motivation has a meaningful effect on leisure participation through leisure participation and adjusting process.

• Journal of the Korean Wood Science and Technology
• /
• v.2 no.4
• /
• pp.4-14
• /
• 1974

The total forest land area in Korea accounts for some 67 percent of the nation's land total. Its productivity, however, is very low. Consequently, forest production accounts for only about 2 percent of the gross national product and a minor proportion of no more than about 5 percent versus primary industry. In this case, however, only the direct income from forestry is taken into account, making no reference to the forestry output induced by other industrial sectors. The value added Or the induced forestry output in manufacturing the primary wood products into higher quality products, makes a larger contribution to the economy than direct contribution. So, this author has tried to analyze the structure of forestry and compute the repercussion effect and the induced output of primary forest products when utilized by other industries for their raw materials, Hsing the input-output table and attached tables for 1963 and 1966 issued by the Bank of Korea. 1. Analysis of forestry structure A. Changes in total output Durng the nine-year period, 1961-1969, the real gross national product in Korea increased 2.1 times, while that of primary industries went up about 1. 4 times. Forestry which was valued at 9,380 million won in 1961, was picked up about 2. 1 times to 20, 120 million won in 1969. The rate of the forestry income in the GNP, accordingly, was no more than 1.5 percent both in 1961 and 1962, whereas its rate in primary industries increased 3.5 to 5.4 percent. Such increase in forestry income is attributable to increased forest production and rise in timber prices. The rate of forestry income, nonetheless, was on the decrease on a gradual basis. B. Changes in input coefficient The input coefficient which indicates the inputs of the forest products into other sectors were up in general in 1966 over 1963. It is noted that the input coefficient indicating the amount of forest products supplied to such industries closely related with forestry as lumber and plywood, and wood products and furniture, showed a downward trend for the period 1963-1966. On the other hand, the forest input into other sectors was generally on the increase. Meanwhile, the input coefficient representing the yolume of the forest products supplied to the forestry sector itself showed an upward tendency, which meant more and more decrease in input from other sectors. Generally speaking, in direct proportion to the higher input coefficient in any industrial sector, the reinput coefficient which denotes the use of its products by the same sector becomes higher and higher. C. Changes in ratio of intermediate input The intermediate input ratio showing the dependency on raw materials went up to 15.43 percent m 1966 from 11. 37 percent in 1963. The dependency of forestry on raw materials was no more than 15.43 percent, accounting for a high 83.57 percent of value added. If the intermediate input ratio increases in any given sector, the input coefficient which represents the fe-use of its products by the same sector becomes large. D. Changes in the ratio of intermediate demand The ratio of the intermediate demand represents the characteristics of the intermediary production in each industry, the intermediate demand ratio in forestry which accunted for 69.7 percent in 1963 went up to 75.2 percent in 1966. In other words, forestry is a remarkable industry in that there is characteristics of the intermediary production. E. Changes in import coefficient The import coefficient which denotes the relation between the production activities and imports, recorded at 4.4 percent in 1963, decreased to 2.4 percent in 1966. The ratio of import to total output is not so high. F. Changes in market composition of imported goods One of the major imported goods in the forestry sector is lumber. The import value increased by 60 percent to 667 million won in 1966 from 407 million won in 1963. The sales of imported forest products to two major outlets-lumber and plywood, and wood products and furniture-increased to 343 million won and 31 million won in 1966 from 240million won and 30 million won in 1963 respectively. On the other hand, imported goods valued at 66 million won were sold to the paper products sector in 1963; however, no supply to this sector was recorded in 1963. Besides these major markets, primary industries such as the fishery, coal and agriculture sectors purchase materials from forestry. 2. Analysis of repercussion effect on production The repercussion effect of final demand in any given sector upon the expansion of the production of other sectors was analyzed, using the inverse matrix coefficient tables attached to the the I.O. Table. A. Changes in intra-sector transaction value of inverse matrix coefficient. The intra-sector transaction value of an inverse matrix coefficient represents the extent of an induced increase in the production of self-support products of the same sector, when it is generated directly and indirectly by one unit of final demand in any given sector. The intra-sector transaction value of the forestry sector rose from 1.04 in 1963 to 1, 11 in 1966. It may well be said, therefore, that forestry induces much more self-supporting products in the production of one unit of final demand for forest products. B. Changes in column total of inverse matrix coefficient It should be noted that the column total indicates the degree of effect of the output of the corresponding and related sectors generated by one unit of final demand in each sector. No changes in the column total of the forestry sector were recorded between the 1963 and 1966 figures, both being the same 1. 19. C. Changes in difference between column total and intra-sector transaction amount. The difference between the column total and intra-sector transaction amount by sector reveals the extent of effect of output of related industrial sector induced indirectly by one unit of final demand in corresponding sector. This change in forestry dropped remarkable to 0.08 in 1966 from 0.15 in 1963. Accordingly, the effect of inducement of indirect output of other forestry-related sectors has decreased; this is a really natural phenomenon, as compared with an increasing input coefficient generated by the re-use of forest products by the forestry sector. 3. Induced output of forestry A. Forest products, wood in particular, are supplied to other industries as their raw materials, increasng their value added. In this connection the primary dependency rate on forestry for 1963 and 1966 was compared, i. e., an increase or decrease in each sector, from 7.71 percent in 1963 to 11.91 percent in 1966 in agriculture, 10.32 to 6.11 in fishery, 16.24 to 19.90 in mining, 0.76 to 0.70 in the manufacturing sector and 2.79 to 4.77 percent in the construction sector. Generally speaking, on the average the dependency on forestry during the period 1963-1966 increased from 5.92 percent to 8.03 percent. Accordingly, it may easily be known that the primary forestry output induced by primary and secondary industries increased from 16, 109 million won in 1963 to 48, 842 million won in 1966. B. The forest products are supplied to other industries as their raw materials. The products are processed further into higher quality products. thus indirectly increasing the value of the forest products. The ratio of the increased value added or the secondary dependency on forestry for 1963 and 1966 showed an increase or decrease, from 5.98 percent to 7.87 percent in agriculture, 9.06 to 5.74 in fishery, 13.56 to 15.81 in mining, 0.68 to 0.61 in the manufacturing sector and 2.71 to 4.54 in the construction sector. The average ratio in this connection increased from 4.69 percent to 5.60 percent. In the meantime, the secondary forestry output induced by primary and secondary industries rose from 12,779 million Wall in 1963 to 34,084 million won in 1966. C. The dependency of tertiary industries on forestry showed very minor ratios of 0.46 percent and 0.04 percent in 1963 and 1966 respectively. The forestry output induced by tertiary industry also decreased from 685 million won to 123 million won during the same period. D. Generally speaking, the ratio of dependency on forestry increased from 17.68 percent in 1963 to 24.28 percent in 1966 in primary industries, from 4.69 percent to 5.70 percent in secondary industries, while, as mentioned above, the ratio in the case of tertiary industry decreased from 0.46 to 0.04 percent during the period 1963-66. The mining industry reveals the heaviest rate of dependency on forestry with 29.80 percent in 1963 and 35.71 percent in 1966. As it result, the direct forestry income, valued at 8,172 million won in 1963, shot up to 22,724 million won in 1966. Its composition ratio lo the national income rose from 1.9 percent in 1963 to 2.3 per cent in 1966. If the induced outcome is taken into account, the total forestry production which was estimated at 37,744 million won in 1963 picked up to 105,773 million won in 1966, about 4.5 times its direct income. It is further noted that the ratio of the gross forestry product to the gross national product. rose significantly from 8.8 percent in 1963 to 10.7 percent in 1966. E. In computing the above mentioned ratio not taken into consideration were such intangible, indirect effects as the drought and flood prevention, check of soil run-off, watershed and land conservation, improvement of the people's recreational and emotional living, and maintenance and increase in the national health and sanitation. F. In conclusion, I would like to emphasize that the forestry sector exercices an important effect upon the national economy and that the effect of induced forestry output is greater than its direct income.

• Journal of the Korean Data and Information Science Society
• /
• v.26 no.1
• /
• pp.65-75
• /
• 2015

This paper analyzes the determinants of wage for the college and university graduates utilizing both individual-level and industry-level variables. We note that wage determination has multi-level structure in the sense that individual wage is influenced by individual-level variables (level-1) and industry-level (level-2) variables. Then, the assumption that individual wage is independent in the classical regression is violated. Therefore, this paper utilizes the hierarchical linear model (HLM). The major results are the followings. First, the multiple correspondence analysis including level-1 and 2 variables reveals that both level 1 and level 2 variables affects individual wages judging from the fact that the values of level 1 and level 2 variables differ across the different level of individual wage groups. Second, the decision tree analysis including level-1 and 2 variables shows that the most influential variable in wage determination is industry-level wage and the next is industry-level working hour, ages and sex in the decling order in. This suggests that the utilization of the HLM is appropriate since the characteristics of industry is important in determining the individual wage. Third, it is shown that the HLM model is the best compared to the other models which do not take level-1 and level-2 variables simultaneously into account.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.10
• /
• pp.119-128
• /
• 2021

In the era of industry 4.0 with the robust digital transformation, especially under the trigger of the Covid-19 pandemic, the process of transforming businesses to achieve the desired business performance depends much on the mindset transformation of each member of the organization, beginning with the thoughts of leadership and stakeholders. This study will evaluate the relationship between leadership's strategic reasoning perspectives on employee engagement or commitment and the company's reputation, thereby directly or indirectly affecting organizational performance. The study examines data from 382 companies out of 500 samples in typical industries in Vietnam using the exploratory factor analysis (EFA) and partial least squares structural equation modeling (PLS-SEM) techniques. The results show that holistic thinking is closely related to employee retention and corporate reputation, thereby increasing the business outcomes of the organization, whereas there was no evidence to support analytical thinking in this study. As a consequence, transforming the business to achieve the desired business performance is heavily reliant on changing the mindset of each member of the organization, beginning with the top leaders and influencers of the business. This will assist Vietnamese leaders in gaining a comprehensive understanding of corporate governance and controlling the relationships between organizational constructs.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.2
• /
• pp.83-90
• /
• 2011

It has been very important to have an exact evaluation for risk factors in order to prevent WMSDs(Work-related Musculoskeletal Disorders). However, most WMSDs evaluation methods have always been some problems of possibilities associated with subjective evaluation. Therefore, this study tried to conduct a sort of usability analysis on three major evaluation methods(OWAS, RULA, REBA). Specifically, major subjects in the study consisted of three parts as follows; comparison of the results between experienced and inexperienced observers, analysis for the consistency of the results in terms of different evaluation times, and analysis for the consistency of the results in terms of different job characteristics(based on the part of the automobile). The results of the study were summarized as follows; 1) There was statistically significant difference of the results by RULA and by REBA between experienced and inexperienced observers. This might be due to the fact that experienced observers have had better ability to detect the important working posture during evaluation. However, the results by OWAS did not give any significantly different results between experienced and inexperienced observers, 2) All three checklists applied by experienced subjects did not show any single result significantly different in terms of different evaluation times. This might have to do with high intra-observer reliability from some of previous studies, 3) The five parts of an automobile were selected as five major jobs with different job characteristics in the automobile industry. Specifically, they were door part, front part(hood, etc.), inside part(dash board, seats, etc.), rear part(trunk etc.), and bottom part. All three methods did not show any significant differences for the results from each observers. Further study on this subject would eventually provide a sophisticated evaluating guidelines for WMSDs regarding determination of observer-specific evaluation, identification of repetitive number of evaluations for stable results for each checklist, determination of job-specific evaluation methods, and so on.

• Korean Journal of Food Science and Technology
• /
• v.52 no.1
• /
• pp.26-30
• /
• 2020

This study was undertaken to determine the characteristics of xanthoangelol, the major chalcone constituent derived from the extracts of different parts of Lespedeza bicolor. Xanthoangelol was isolated from the root extract using column chromatography and used as a standard for quantitative analysis. The structure of the isolated compound was established based on spectroscopic evidence. The HPLC-DAD method was validated for specificity, linearity, precision, accuracy, limit of detection, and limit of quantitation. The calibration curve of xanthoangelol had significant linearity (R²>0.9999). Limit of detection and limit of quantitation 0.018 and 0.059 ㎍/mL, respectively. The relative standard deviation values of precision test, and intra- and inter-day tests were less than 0.22 and 0.40%, respectively. In the recovery test, the accuracy ranged from 98.98-102.78% with RSD values less than 0.13%. The method validation parameters indicate the applicability of the HPLC method for quality control of food or drug formulations containing L. bicolor.

• Journal of the Korean Society of Safety
• /
• v.23 no.6
• /
• pp.150-157
• /
• 2008

The purpose of this study was to investigate the effect of short-tenn stretching type of muscular strength gymnastics on health-related fitness and rating of perceived pain for automotive industry workers. The subjects selected were 27, who were divided into 3 groups(A group=10, B group=9, C group=8). Group A performed a short-term stretching Type of Muscular Strength Gymnastics only one time. Group B continuously performed the exercise program two times. Group C was a control group. The exercise program was a stretching Type of Muscular Strength Gymnastics, which was performed 3 times per week for 4 weeks. Its intensity was RPE 11-15. Data analysis was conducted by using SPSS ver 14.0. The test was conducted with two-way repeated ANOVA, post-hoc Ducan and paired t-test (a<.05). This study showed the following results. Muscular strength, muscular endurance and flexibility increased in all intra and between groups. Ratio of %fat decreased for group B but the control group presented conversely. Rating of perceived pain of group A decreased at arm and hands. Rating of perceived pain of group A decreased at back and leg.

• Journal of The Korean Society of Integrative Medicine
• /
• v.9 no.4
• /
• pp.291-298
• /
• 2021

Purpose: The Pedisole is a newly developed shoe-mounted wearable assessment system for analyzing balance and gait. This study aimed to determine the reliability and validity of the parameters provided by the system for static balance and gait analysis of healthy adults. Methods: This study included 38 healthy adults (22.4±1.9 years) with no history of injury in the lower limbs. All participants were asked to perform balance and gait tasks for undertaking measurements. For analysis of balance, both the smart Pedisole and Pedoscan systems were concurrently used to analyze the path length of the center of pressure (COP) and the weight ratio of the left and right for 10 s. Gait was measured using the smart Pedisole and GaitRite walkway systems simultaneously. The participants walked at a self-selected preferred gait speed. The cadence, stance time, swing time, and step time were used to analyze gait characteristics. Using the paired t-test, the intra-class coefficient correlation (ICC) was calculated for reliability. The Spearman correlation was used to assess the validity of the measurements. In total, data for balance from 36 participants and the gait profiles of 37 participants were evaluated. Results: There were significant differences between the COP path lengths (p<.050) derived from the two systems, and a significant correlation was found for COP path length (r=.382~.523) for static balance. The ICC for COP path length and weight ratio was found to be greater than .687, indicating moderate agreement in balance parameters. The ICC of gait parameters was found to be greater than .697 except for stance time, and there was significant correlation (r=.678~.922) with the GaitRite system. Conclusion: The newly developed smart insole-type Pedisole system and the related application are useful, reliable, and valid tools for balance and gait analysis compared to the gold standard Pedoscan and the GaitRite systems in healthy individuals.

• Journal of Environmental Science International
• /
• v.18 no.10
• /
• pp.1135-1141
• /
• 2009

Carrots (Daucus carota L.) are consumed as an important dietary source of provitamin A including $\beta$-carotene, $\alpha$-carotene and lutein. An HPLC method was applied to determine the content of the carotenoid composition in carrot cutivars cultivated in Korea. HPLC analyses were carried out with five carrot cultivars (Socheon-5-chon, Hongsim-5-chon, Myeongju-5-chon, Seonhongbom-5-chon and Betarich) sown at April, 2007 and six cultivars (Yeoreum-5-chon, Hanyeoreum-5-chon, Sinheukjeon-5-chon, Bibariheukjeon, Manina and Betarich) sown at August of the same year. In general, the former varieties are not used for the sowing at summer because of their bolting (growth of floral axis). The former and the latter carrots were harvested after 110 and 96 days from seeding, respectively, and the carotenoids were extracted with acetone after freeze-drying. The amount of $\alpha$-carotene ($117.7{\sim}205.3\;{\mu}g/g{\cdot}DW$) was similar to that of $\beta$-carotene ($113.1{\sim}189.6\;{\mu}g/g{\cdot}DW$) for the carrot cultivars sown at spring, while the content ($46.2{\sim}71.1\;{\mu}g/g{\cdot}DW$) was about a half of $\beta$-carotene content ($92.5{\sim}140.2\;{\mu}g/g{\cdot}DW$) for the latter cultivars. In addition, the average content of lutein ($25.2\;{\mu}g/g{\cdot}DW$) in the former cultivars was eight times higher than that in the latter cultivars ($3.1\;{\mu}g/g{\cdot}DW$). Among the spring cultivation types, Socheon-5-chon and Myeongju-5-chon showed higher amount of $\alpha$-carotene and $\beta$-carotene, while the higher amount was determined in Yeoreum-5-chon and Sinheukjeon-5-chon among the autumn cultivation types. Validation of the HPLC-DAD method showed good linearity ($r^2$ > 0.997) of the three compounds analyzed in a wide concentration range ($0.025{\sim}20\;{\mu}g/ml$). The R.S.D. values for intra-day and inter-day precision were less than 19.2% and the mean recovery of each compound was 85.4~104.7%.