• Journal of Korea Multimedia Society
• /
• v.12 no.7
• /
• pp.922-928
• /
• 2009

In H.264 as the newest video standard, 9 modes are used in order to predict the signal values of a block composed with several pixels by intra prediction. From these process, H.264 can bring high compression ratio in the encoded signal but the use of total 9 modes can give the inefficiency of the increase of the complexity induced by the amount of operation processing or the number of searching which is applied to compare adjacent pixels. This paper proposes a simplification method of prediction mode for the intra-picture coding by considering subjective interest region. There are certain region being interested within a picture of the video sequence. This region requires better subjective picture quality than the other regions. The proposed method increases the simplification of prediction mode by providing just essential modes of total 9 modes for less interest regions compared with the interest region. It is possible to get the additional 11%$\sim$15% simplification of the prediction mode by the proposed method, compared with the conventional method which simplifies the prediction mode for all of the picture by using the prediction characteristics only.

• Journal of Korea Multimedia Society
• /
• v.13 no.2
• /
• pp.185-195
• /
• 2010

In this paper, we propose an efficient inter and intra prediction algorithms for fast encoding of H.264/AVC. First, inter prediction mode decision method decides early using temporal/spatial correlation information and pixel direction information. Second, intra prediction mode decision method selects block size judging smoothness degree with inner/outer pixel value variation and decides prediction mode using representative pixel and reference pixel. Lastly, adaptive motion search region restriction sets search region using mode information of neighboring block and predicted motion vector. The experimental results show that proposed method can achieve about 18~53% reduction compared with the existing JM 14.1 in the encoding time. In RD performance, the proposed method does not cause significant PSNR value losses while increasing bitrates slightly.

• Journal of Broadcast Engineering
• /
• v.13 no.2
• /
• pp.200-213
• /
• 2008

H.264| MPEG-4 AVC is a new video codingstandard defined by JVT (Joint Video Team) which consists of ITU-T and ISO/IEC. Many techniques are adopted fur the compression efficiency: Especially, an intra prediction in an inter frame is one example but it leads to excessive amount of encoding time due to the decision of a candidate mode and a RDcost calculation. For this reason, a fast determination of the best intra prediction mode is the main issue for saving the encoding time. In this paper, by using the result of statistical relation between intra $16{\times}16$ and $4{\times}4$ intra predictions, the number of candidate modes for $4{\times}4$ intra prediction is reduced. Firstly, utilizing motion vector obtained after inter prediction, prediction of a block mode for each macroblock is made. If an intra prediction is needed, the correlation table between $16{\times}16$ and $4{\times}4$ intra predicted modes is created using the probability during each I frame-coding process. Secondly, using this result, the candidate modes for a $4{\times}4$ intra prediction that reaches a predefined specific probability value are only considered in the same GOP For the experiments, JM11.0, the reference software of H.264|MPEG-4 AVC is used and the experimental results show that the encoding time could be reduced by 51.24% in maximum with negligible amounts of PSNR drop and bitrate increase.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.3A
• /
• pp.157-162
• /
• 2012

In this paper, we propose a new intra mode coding method using the candidate mode table. In the conventional HEVC, if the predicted most probable mode (MPM) is not same with the current prediction mode, the current prediction mode is encoded using the fixed length code (FLC). However, since a large number of modes are used in HEVC, the codeword length of FLC gets longer. In this paper, we generate the candidate mode table from neighboring blocks and encode the obtained intra mode index using Golomb-Rice code instead of FLC, when the predicted MPM is not identical to the current mode. From the experiment, we verified that the proposed method reduces the BD-rate by 0.5% on average, compared to the HEVC intra mode coding method.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2019.11a
• /
• pp.20-21
• /
• 2019

The Joint Video Experts Team (JVET) has been working on the development of next generation of video coding standard called Versatile Video Coding (VVC). Position Dependent Intra Prediction Combination (PDPC) which is one of the major tools for intra prediction refines the prediction through a linear combination between the reconstructed samples and the predicted samples according to the sample position. In VVC WD6, nScale which is shift value that adjusts the weight is determined by the width and height of the current block. It may cause that PDPC is applied to regions that do not fit the characteristics of the current intra prediction mode. In this paper, we define nScale for each width and height so that the weight can be applied independently to the left and top reference samples, respectively. Experimental results show that, compared to VTM 6.0, the proposed method gives -0.01%, -0.04% and 0.01% Bjotegaard-Delta (BD)-rate performance, for Y, Cb, and Cr components, respectively, in All-Intra (AI) configuration.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.10
• /
• pp.154-163
• /
• 2014

In this paper, there is suggested a fast intra prediction mode decision method in HEVC. To reduce the number of candidates in rough mode decision (RMD) process and rate-distortion optimization (RDO) process, the edge information and relative RMD cost are utilized. The experiment results show that the proposed method reduces encoding run-time by 26.81% with a negligible coding loss of 0.79% BD-rate on average.

• Journal of Broadcast Engineering
• /
• v.17 no.3
• /
• pp.471-479
• /
• 2012

Intra prediction is one of the significant techniques in H.264/AVC reference software; however, it has heavy computational complexity. In order to solve this problem, many fast algorithms have been proposed. In this paper, we propose a fast intra mode decision algorithm which predicts the edge direction of the current block using sub-sampled pixels to reduce high computational complexity of the H.264/AVC encoder. The proposed algorithm shows that it not only improves the coding performance but also reduces the computational complexity of the H.264/AVC encoder compared to previous algorithms. The experimental results show that the proposed algorithm achieves the encoding time reduction of 75.93% on an average with slight peak signal-to-noise ratio (PSNR) drop and bit-rate increment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.5C
• /
• pp.503-511
• /
• 2006

H.264 adopts new coding tools such as intra-prediction, loop filter, etc. The adoption of these tools enables an H.264-coded bitstream to have more information compared with previous standards. In this paper we proposed an effective spatial error concealment method for H.264. Among the information included in an H.264-coded bitstream, we use intra-mode for recovering a damaged block. This is because prediction direction in intra-mode is highly correlated to the edge direction of a lost macroblock. We first estimate the edge direction using intra-modes of blocks adjacent to a lost macroblock, and classify the area in a damaged macroblock into the edge and the flat area. And then our method recovers pixel values in the edge area using edge-directed interpolation, and recovers pixel values in the flat area using weighted interpolation. Simulation results show the proposed method yields better video quality than conventional approaches by 0.35 to 5.48 dB.

• Journal of Broadcast Engineering
• /
• v.15 no.4
• /
• pp.498-512
• /
• 2010

Intra coding is an indispensable coding tool since it can provide random accessibility as well as error resiliency. However, it is the problem that intra coding has relatively low coding efficiency compared with inter coding in the area of video coding. Even though H.264/AVC has significantly improved the intra coding performance compared with previous video standards, H.264/AVC encoder complexity is significantly increased, which is not suitable for low bit rate interactive services. In this paper, a Voting-based Intra Mode Bit Skip (V-IMBS) scheme is proposed to improve coding efficiency as well as to reduce encoding time complexity using decoder-side prediction. In case that the decoder can determine the same prediction mode as what is chosen by the encoder, the encoder does not send that intra prediction mode; otherwise, the conventional H.264/AVC intra coding is performed. Simulation results reveal a performance increase up to 4.44% overall rate savings and 0.24 dB in peak signal-to-noise ratio while the frame encoding speed of proposed method is about 42.8% better than that of H.264/AVC.

• Journal of information and communication convergence engineering
• /
• v.7 no.2
• /
• pp.193-198
• /
• 2009

The H.264/ AVC video coding standard supports the intra prediction with various block sizes for luma component and a 8x8 block size for chroma components. This new feature of H.264/AVC offers a considerably higher improvement in coding efficiency compared to previous compression standards. In order to achieve this, H.264/AVC uses the Rate-distortion optimization (RDO) technique to select the best intra prediction mode for each block size, and it brings about the drastic increase of the computation complexity of H.264 encoder. In this paper, a fast block size decision algorithm is proposed to reduce the computation complexity of the intra prediction in H.264/AVC. The proposed algorithm computes the smoothness based on AC and DC coefficient energy for macroblocks and compares with the nonparametric criteria which is determined by considering information on neighbor blocks already reconstructed, so that deciding the best probable block size for the intra prediction. Also, the use of non-parametric criteria makes the performance of intra-coding not be dependent on types of video sequences. The experimental results show that the proposed algorithm is able to reduce up to 30% of the whole encoding time with a negligible loss in PSNR and bitrates and provides the stable performance regardless types of video sequences.