• 대한기계학회논문집B
• /
• 제25권2호
• /
• pp.205-215
• /
• 2001

An experimental study has been performed to investigate the heat transfer characteristics of fin and tube heat exchanger. The existing transient and steady methods are very difficult to apply for the measurements of heat transfer coefficients of a thin heat transfer model. In this study the lumped capacitance method was adopted. The heat transfer coefficients were measured by using the lumped capacitance method based on the liquid crystal thermography. The method is validated through impinging jet and flat plate flow experiments. The two experiments showed that the results of the lumped capacitance method with polycarbonate model showed very good agreements with those of the transient method with acryl model. The lumped capacitance method showed similar results regardless of the thickness of polycarbonate model. The method was also applied for the heat transfer coefficient measurements of a fin and tube heat exchanger. The quantitative heat transfer coefficients of the plate fin were successfully obtained. As the frontal velocity increased, the heat transfer coefficients were increased, but the color-band shape showed similar patterns regardless of frontal velocity.

• Structural Engineering and Mechanics
• /
• 제37권3호
• /
• pp.331-349
• /
• 2011

This study investigates the use of a vibration correlation technique (VCT) to identify the buckling load of a rectangular thin plate. It is proposed that the buckling load can be determined experimentally using the natural frequencies of plates under tensile loading. A set of rectangular plates was tested for natural frequencies using an impact test method. Aluminum and stainless steel specimens with CCCC, CCCF and CFCF boundary conditions were included in the experiment. The measured buckling load was determined from the plot of the square of a measured natural frequency versus an in-plane load. The buckling loads from the measured vibration data match the numerical solutions very well. For specimens with well-defined boundary conditions, the average percentage difference between buckling loads from VCT and numerical solutions is -0.18% with a standard deviation of 5.05%. The proposed technique using vibration data in the tensile loading region has proven to be an accurate and reliable method which might be used to identify the buckling load of plates. Unlike other static methods, this correlation approach does not require drawing lines in the pre-buckling and post-buckling regions; thus, bias in data interpretation is avoided.

• Steel and Composite Structures
• /
• 제2권1호
• /
• pp.35-50
• /
• 2002

A series of tests on simple-welded plate specimens (SWPS) and T-stub tension specimens simulating some of the joint details in moment frame connections were conducted in this investigation. The effects of weld strength mismatch and weld metal toughness on structural behavior of these specimens were considered under both static and dynamic loading conditions. Finite element analyses were performed by taking into account typical weld residual stress distributions and weld metal strength mismatch conditions to facilitate the interpretation of the test results. The major findings are as follows: (a) Sufficient specimen size requirements are essential in simulating both load transfer and constraint conditions that are relevant to moment frame connections, (b) Weld residual stresses can significantly elevate stress triaxiality in addition to structural constraint effects, both of which can significantly reduce the plastic deformation capacity in moment frame connections, (c) Based on the test results, dynamic loading within a loading rate of 0.02 in/in/sec, as used in this study, premature brittle fractures were not seen, although a significant elevation of the yield strength can be clearly observed. However, brittle fracture features can be clearly identified in T-stub specimens in which severe constraint effects (stress triaxiality) are considered as the primary cause, (d) Based on both the test and FEA results, T-stub specimens provide a reasonable representation of the joint conditions in moment frame connections in simulating both complex load transfer mode and constraint conditions.

• 플랜트 저널
• /
• 제9권3호
• /
• pp.48-52
• /
• 2013

본 연구에서는 전산유체해석(CFD)을 통하여 SCR 탈질설비 내부의 유동장 흐름을 전산모사하였다. 또한 유동장의 균일도를 분석하기 위해 기존 설비에 대한 해석을 수행하였으며 이를 통해 문제점을 도출하고 개선하였다. 개선방안으로는 곡관에 guide vane을 설치하여 곡관상에 기류를 균일하게 안내해 주었으며, baffle을 설치하여 SCR설비로 초기 유입된 기류의 균일한 공간 분포를 도출하였다. 마지막으로 porous plate를 baffle 하단에 설치하여 균일류 형성의 최적화 모델을 도출하였다.

• 대한토목학회논문집
• /
• 제29권5A호
• /
• pp.421-431
• /
• 2009

본 연구는 유도초음파를 기반으로 한 구조물 건전성 모니터링 알고리즘 검증에 관한 것이다. 유도초음파 중 램파를 기반으로 하는 능동검사시스템을 사용하였으며 본 알고리즘의 적용에 관한 기초연구로서 강판에 표면결함인 원형노치를 감지하는 실험을 수행하였다. Pitch-catch방법으로 강판 표면 원형노치에 대한 손상 탐상을 수행하여 손상전후의 $S_0$모드를 비교함으로써 손상 특성을 파악하며 손상전후 신호의 수학적 차에 의해 구한 산란램파(scatter)에 의해 손상을 평가할 수 있다. 손상전후 신호의 $S_0$모드 램파를 분석하기 위해서 연속 가보 웨이블릿 변환을 사용하여 전파시간을 구할 수 있다. 본 알고리즘은 손상모니터링 다각형과 Pitch-catch 방법을 기초로 하며 손상 위치표정값들의 평균과 표준편차에 의해 손상위치표정 및 크기를 정확히 추정 가능함이 검증되었다.

• 한국안전학회지
• /
• 제29권6호
• /
• pp.81-86
• /
• 2014

Composite materials have high specific stiffness, specific strength than existing concrete or steel materials. It has superior dynamic properties when utilizing advantages of material such as Non-corrosive, light weight, non-conducting and it has superior mold ability which can make variable shapes. Thus, in the construction, for using composite materials as construction materials, the study carried out static strength of fiber right angle direction and fatigue performance of FRP deck member. The study is going to deduct S-N curve by analyzing the results comparatively and estimate long-term durability. From now on, the study is going to provide interpretation of FRP member and basic data of design basis, furthermore providing foundation technique of composite materials' application of structural frame is the goal of this study.

• 산업기술연구
• /
• 제3권
• /
• pp.9-15
• /
• 1983

To detect faulted coal seam, two and three dimensional model experiments were conducted. The size of three dimensional water tank is $170cm{\times}80cm{\times}95cm$ and the size of model coal seam is $20cm{\times}50cm{\times}1cm$ carbon plate. In this paper, various potential curves were made changing distance and model size from surface. Using these curves, interpretation of faulting coal explotation in complex topography can be done by comparing field data each other.

• 한국기계가공학회지
• /
• 제17권1호
• /
• pp.76-81
• /
• 2018

This study aims to provide ways to achieve structural improvements of the internal flow path of the discharge plenum of a swash plate piston pump valve block vulnerable to cracks. This paper corresponds to Part II, which consists of a structural interpretation of the internal flow path of the discharge plenum of the valve block. The simple model result reviewed in Part I was incorporated into the valve block model and five different design changes were reviewed as part of the study on the structural improvement of the internal flow path of the valve block.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.629-640
• /
• 2008

South anchorage(AN1, Myodo side) of supension bridge between Myodo and Gwangyang is designed as rock anchorage with 36m anchor length using the resistance of rock mass in Myodo. Checking the overall stability of the anchorage, we considered rock joints, bedding planes, fault zones and condition of rock structure in situ by analysis results for photo-lineaments, aerial photograph interpretation and drill-hole logs are considered. This anchorage consists of an access shaft, adit, and the upper and lower concrete bearing plate to introduce pre-stressing force into rock mass.

• 대한음성학회지:말소리
• /
• 제60호
• /
• pp.85-96
• /
• 2006

The aim of the present study was to investigate a simile comprehension of children with and without mental retardation. Thirteen children with mental retardation and ten normal children with matched receptive vocabulary ability participated in the study. They were between five and eight years old in the age of receptive vocabulary. Fourteen picture plates were used and each plate consisted of three pictures. The findings were as fellows. First, children with mental retardation made significantly more errors than normal children in the comprehension of simile. Second, mental retarded children and normal children did not have a significant correlation between receptive vocabulary development and comprehension of simile. Finally, on simile interpretation type, children with mental retardation were likely to think a tenor into a vehicle because they failed to recognize the syntactic structure of simile, 'A is like B'. Thus, It is important to teach mental retarded children the syntactic structures of simile and to provide them with a variety of experience as well as to let them know an exact meaning of words.