• Journal of Biomedical Engineering Research
• /
• v.24 no.3
• /
• pp.183-192
• /
• 2003

A transformation methode of the chromaticity coordinates was proposed to calibrate the measured data obtained by a urine analysis system which implemented in our previous study. Generally. the reacted color of a reagent strip by urine analysis system often exhibit the color distortions due to nonlinear characteristics of the various devices that is the optic module mechanism. hardware, and surround circumstance. A color correction method for minimizing the color distortion play a few role in maintaining high accuracy and reproduction of the urine analysis system. In this work, we used the compensation method such as the shading correction, the characteristic curve extraction of RGB color by means of third order spline interpolation, and linear transformation using a reference color. In addition, 1931 CIE XYZ color space was used to compensate the color of the measured data by a standard reference system as colorimeter. A compensation matrix was obtained so that the output values of the urine analysis system is nearly equal to that of a standard reference system for identical color sample. Color correction obtained by a urine analysis system which implemented in our previous study exhibited a good color accuracy when it was compared with the reference data. Observed result from an experiments on ten items or a urinalysis strip that color difference or between two urine analysis system was 1.28.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.3
• /
• pp.65-74
• /
• 2014

Borehole investigation which is mainly used to figure out geotechnical characterizations at construction work has the benefit that it provides a clear and convincing geotechnical information. But it has limitations to get the overall information of the construction site because it is performed at point location. In contrast, geophysical measurements like seismic survey has the advantage that the geological stratum information of a large area can be characterized in a continuous cross-section but the result from geophysics survey has wide range of values and is not suitable to determine the geotechnical design values directly. Therefore it is essential to combine borehole data and geophysics data complementally. Accordingly, in this study, a three-dimensional spatial interpolation of the cross-sectional distribution of seismic refraction was performed using digitizing and geostatistical method (krigring). In the process, digital map were used to increase the trustworthiness of method. Using this map, errors of ground height which are broken out in measurement from boring investigation and geophysical measurements can be revised. After that, average seismic velocity are derived by comparing borehole data with geophysical speed distribution data of each soil layer. During this process, outlier analysis is adapted. On the basis of the average seismic velocity, integrated analysis techniques to determine the three-dimensional geological stratum information is established. Finally, this analysis system is applied to dam construction field.

• Geophysics and Geophysical Exploration
• /
• v.16 no.1
• /
• pp.27-35
• /
• 2013

In this study, we developed the trial product on 3D magnetic inversion tentatively named 'KMag3D'. Also, we briefly introduced its own function and graphic user interface on which especially focused through the development in the form of user manual. KMag3D is consisted of two fundamental frame for the 3D magnetic inversion. First, algebraic reconstruction technique was selected as a 3D inversion algorithm instead of least square method conventionally used in various magnetic inversion. By comparison, it was turned out that algebraic reconstruction algorithm was more effective and economic than that of least squares in aspect of both computation time and memory. Second, for the effective determination of the 3D initial and a-priori information model required in the execution of our algorithm, we proposed the practical technique based on the assemblage of 2D forward modeling and inversion results for individual user-selected 2D profiles. And in succession, initial and a-priori information model were constructed by appropriate interpolation along the strke direction. From this, we concluded that our technique is both suitable and very practical for the application of 3D magentic inversion problem.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.5 s.305
• /
• pp.95-102
• /
• 2005

When images compressed with block-based compression techniques are transmitted over a noisy channel, unexpected block losses occur. In this paper, we present a post-processing-based block recovery scheme using Haar wavelet features. No consideration of the edge-direction, when recover the lost blocks, can cause block-blurring effects. The proposed directional recovery method in this paper is effective for the strong edge because exploit the varying neighboring blocks adaptively according to the edges and the directional information in the image. First, the adaptive selection of neighbor blocks is performed based on the energy of wavelet subbands (EWS) and difference of DC values (DDC). The lost blocks are recovered by the linear interpolation in the spatial domain using selected blocks. The method using only EWS performs well for horizontal and vertical edges, but not as well for diagonal edges. Conversely, only using DDC performs well diagonal edges with the exception of line- or roof-type edge profiles. Therefore, we combined EWS and DDC for better results. The proposed methods out performed the previous methods using fixed blocks.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.3
• /
• pp.36-51
• /
• 2012

The demand for a climatological dataset with a regular spaced grid is increasing in diverse fields such as ecological and hydrological modeling as well as regional climate impact studies. PRISM(Precipitation-Elevation Regressions on Independent Slopes Model) is a useful method to estimate high-altitude precipitation. However, it is not well discussed over the optimization of PRISM parameters and DEM(Digital Elevation Model) resolution in South Korea. This study developed the PRISM and then optimized parameters of the model and DEM resolution for producing a gridded annual average precipitation data of South Korea with 1km spatial resolution during the period 2000-2005. SCE-UA (Shuffled Complex Evolution-University of Arizona) method employed for the optimization. In addition, sensitivity analysis investigates the change in the model output with respect to the parameter and the DEM spatial resolution variations. The study result shows that maximum radius within which station search will be conducted is 67km. Minimum radius within which all stations are included is 31km. Minimum number of stations required for cell precipitation and elevation regression calculation is four. Optimizing DEM resolution is $1{\times}1km$. This study also shows that the PRISM output very sensitive to DEM spatial resolution variations. This study contributes to improving the accuracy of PRISM technique as it applies to South Korea.

• Korean Journal of Remote Sensing
• /
• v.33 no.3
• /
• pp.275-285
• /
• 2017

National Meteorological Satellite Center(NMSC) has produced Sea Surface Temperature (SST) using Communication, Ocean, and Meteorological Satellite(COMS) data since April 2011. In this study, we have developed a new regional COMS SST algorithm optimized within the North-West Pacific Ocean area based on the Multi-Channel SST(MCSST) method and made a composite SST using polar orbit satellites as well as the COMS data. In order to retrieve the optimized SST at Northwest Pacific, we carried out a colocation process of COMS and in-situ buoy data to make coefficients of the MCSST algorithm through the new cloud masking including contaminant pixels and quality control processes of buoy data. And then, we have estimated the composite SST through the optimal interpolation method developed by National Institute of Meteorological Science(NIMS). We used four satellites SST data including COMS, NOAA-18/19(National Oceanic and Atmospheric Administration-18/19), and GCOM-W1(Global Change Observation Mission-Water 1). As a result, the root mean square error ofthe composite SST for the period of July 2012 to June 2013 was $0.95^{\circ}C$ in comparison with in-situ buoy data.

• Journal of Biomedical Engineering Research
• /
• v.24 no.4
• /
• pp.259-266
• /
• 2003

Non-rigid registration between different modality images with shape deformation can be used to diagnosis and study for inter-patient image registration, longitudinal intra-patient registration, and registration between a patient image and an atlas image. This paper proposes a hierarchical registration method using bodily tissue based segmentation for registration between color images and CT images of the Visible Human leg areas. The cross-sectional color images and the axial CT images are segmented into three distinctive bodily tissue regions, respectively: fat, muscle, and bone. Each region is separately registered hierarchically. Bounding boxes containing bodily tissue regions in different modalities are initially registered. Then, boundaries of the regions are globally registered within range of searching space. Local boundary segments of the regions are further registered for non-rigid registration of the sampled boundary points. Non-rigid registration parameters for the un-sampled points are interpolated linearly. Such hierarchical approach enables the method to register images efficiently. Moreover, registration of visibly distinct bodily tissue regions provides accurate and robust result in region boundaries and inside the regions.

• Journal of Advanced Navigation Technology
• /
• v.17 no.5
• /
• pp.475-483
• /
• 2013

In this paper, the performances of modeling methods for combining corrections from multiple reference stations for network user were compared and analyzed. The longer the distance between reference station and user is, the more the GPS errors are decorrelated. Based on this point, multiple corrections from reference stations which is constituting a network should be combined properly to be applied for user observation to eliminate GPS errors. There are many widely used conventional modeling methods and they are applied for Compact Network RTK users and user position accuracy is predicted by using residual errors in observation of user. Compact Network RTK is a technique of generating corrections which was developed by Seoul National University. As a result, the horizontal and vertical accuracies were within about 5 cm and 7 cm respectively with 95 % probability for all conventional modeling methods. In addition, we analyzed condition for reference station constellation for modeling method using height information.

• Journal of Climate Change Research
• /
• v.2 no.2
• /
• pp.79-91
• /
• 2011

In order to study interactions between climate change and air quality, a modeling system including the downscaling scheme has been developed in the integrated manner. This research focuses on the development of a downscaling method to utilize CCSM3 outputs as the initial and boundary conditions for the regional climate model, MM5. Horizontal/vertical interpolation was performed to convert from the latitude/longitude and hybrid-vertical coordinate for the CCSM3 model to the Lambert-Conformal Arakawa-B and sigma-vertical coordinate for the MM5 model. A variable diagnosis was made to link between different variables and their units of CCSM and MM5. To evaluate the dynamic downscaling performance of this study, spatial distributions were compared between outputs of CCSM/MM5 and NRA/MM5 and statistic analysis was conducted. Temperature and precipitation patterns of CCSM/MM5 in summer and winter showed a similar pattern with those of observation data in East Asia and the Korean Peninsula. In addition, statistical analysis presented that the agreement index (AI) is more than 0.9 and correlation coefficient about 0.9. Those results indicate that the dynamic downscaling system built in this study can be used for the research of interaction between climate change and air quality.

• Journal of Environmental Impact Assessment
• /
• v.27 no.6
• /
• pp.717-726
• /
• 2018

PM(Particulate Matter) cause serious diseases of air pollution. Most of the studies have analyzed local distribution trends using satellite images or modeling techniques. However,the method using the spatial interpolation method based on the meteorological value is insufficient in Korea. In this study, monthly spatial distribution of $PM_{10}$ and $PM_{2.5}$ in January, February, March, and April of 2018 Seoul Metropolitan City were analyzed based on 39 PM monitoring networks. In addition, a distribution map showing the difference between $PM_{10}$ and $PM_{2.5}$ was based on the distribution obtained through this study. The regions of high $PM_{10}$ and $PM_{2.5}$ emissions were selected. In addition, the correlation between $PM_{10}$ and $PM_{2.5}$ was confirmed through the distribution map. This study analyzed the spatial distribution variation results of analyzing $PM_{10}$ and $PM_{2.5}$ in Seoulthrough spatial analysis technique. As a result of this study, it was confirmed that $PM_{10}$ shows high measured value on the roadside measurement station.