• Nuclear Engineering and Technology
• /
• 제48권4호
• /
• pp.1047-1057
• /
• 2016

Design engineering process for field programmable gate array (FPGA)-based reactor trip functions are developed in this work. The process discussed in this work is based on the systems engineering approach. The overall design process is effectively implemented by combining with design and implementation processes. It transforms its overall development process from traditional V-model to Y-model. This approach gives the benefit of concurrent engineering of design work with software implementation. As a result, it reduces development time and effort. The design engineering process consisted of five activities, which are performed and discussed: needs/systems analysis; requirement analysis; functional analysis; design synthesis; and design verification and validation. Those activities are used to develop FPGA-based reactor bistable trip functions that trigger reactor trip when the process input value exceeds the setpoint. To implement design synthesis effectively, a model-based design technique is implied. The finite-state machine with data path structural modeling technique together with very high speed integrated circuit hardware description language and the Aldec Active-HDL tool are used to design, model, and verify the reactor bistable trip functions for nuclear power plants.

• 시스템엔지니어링학술지
• /
• 제16권2호
• /
• pp.47-58
• /
• 2020

Most of the reactor trips in Korean NPPs related to core protection systems were caused not because of proximity of boiling crisis and, consequently, a damage in the core, but due to particular miscalculations or component failures related to the core protection system. The most common core protection system applied in Korean NPPs is the Core Protection Calculator System (CPCS), which is installed in OPR1000 and APR1400 plants. It generates a trip signal to scram the reactor in case of low Departure from Nucleate Boiling Ratio (DNBR) or high Local Power Density (LPD). However, is a reactor trip necessary to protect the core? Or could a fast power reduction be enough to recover the DNBR/LPD without a scram? In order to analyze the online calculation of DNBR/LPD, and the use of fast power reduction as trip avoidance methodology, a concept of CPCS with fast power reduction function was developed in Matlab® Simulink using systems engineering approach. The system was validated with maximum of 0.2% deviation from the reference and the dynamic deviation was maximum of 12.65% for DNBR and 6.72% for LPD during a transient of 16,000 seconds.

• Nuclear Engineering and Technology
• /
• 제46권2호
• /
• pp.235-246
• /
• 2014

The automatic seismic trip system (ASTS) continuously monitors PGA (peak ground acceleration) from the seismic wave, and automatically generates a trip signal. This work presents how the system can be designed by using a systems engineering approach under the given regulatory criteria. Overall design stages, from the needs analysis to design verification, have been executed under the defined processes and activities. Moreover, this work contributes two significant design areas for digitalized ASTS. These are firstly, how to categorize the ASTS if the ASTS has a backed up function of the manual reactor trip, and secondly, how to set the requirements using the given design practices either in overseas ASTS design or similar design. In addition, the methodology for determining the setpoint can be applied to the I&C design and development project which needs to justify the error sources correctly. The systematic approach that has been developed and realized in this work can be utilized in designing new I&C (instrument and control system) as well.

• International Journal of Railway
• /
• 제5권4호
• /
• pp.139-143
• /
• 2012

In Korea, almost 700 industrial parks are under operation. Generally, industrial parks consist of national industrial parks and local industrial parks which are managed by a central government and by local governments respectively. The developing countries such as Korea, China and Vietnam etc. have constructed many industrial parks, which result in the change of land use pattern and also affect future trip demands. Therefore, in estimating traffic demands, it is very important to consider the industrial park development. This study aims to improve the methodology in estimating a freight trip generation rate with the data based on a nationwide commodity freight survey. The result showed that it is desirable to apply freight trip generation rate by the industry sector in estimating freight trip generations and using the production area of firm as an indicator. Specially, the reliability of the rates through a survey could be made sure because a sample rate based on firms in industrial parks was over 25% and the response rate was over 67%. The sample rate and response rate are very superior as compared to surveys conducted in many other countries. Because industrial parks have significant effects on forecasting transportation demand in pre-feasibility studies of transport and logistics projects, it is expected that the accuracy of freight trip demands would be improved through the results of this study.

• 대한안전경영과학회지
• /
• 제16권3호
• /
• pp.317-326
• /
• 2014

Slips and falls are associated with many public injuries in Korea. It is also estimated that slipping are major contributors to slip, trip and fall injury burden. The primary purpose of the present study is to determine if, and to what extent, the standard could be improved in present environment. In order to fulfill our objective, the regulations in Korea and foreign countries were investigated and reviewed. Many kind of standard, mandatory documents and guideline were also reviewed. And then, regulations, standard, guideline etc. reviewed were compared with each others. Also, some criteria was developed in this study. Standard and criteria developed in this study will help to prevent slip, trip, and fall injuries.

• International Journal of Korean Welding Society
• /
• 제2권2호
• /
• pp.47-50
• /
• 2002

Because of the environmental problems, automotive companies are trying to reduce the weight of car body. Therefore, TRIP(TRansformation Induced Plasticity) steels, which have high strength and ductility have been developed. Welding process is a complex process; therefore deciding the optimal welding conditions on the basis of experimental data is an effective method. However, trial-and-error method to decide the optimal conditions requires too many experiments. To overcome these problems, response surface methodology was used. Response surface methodology is a collection of mathematical and statistical techniques that are used in the modeling and analysis of problems in which a response of interest is influenced by several variables and the objective is to optimize this response. This method was applied to the resistance spot welding process of the TRIP steel to optimize the welding parameters.

• 대한교통학회지
• /
• 제26권6호
• /
• pp.7-15
• /
• 2008

기존의 아세안지역 국가간 여객통행수요예측에 있어 적용된 방법론은 자료의 한계로 인하여 모형을 이용하기보다는 개략적인 분석방법론과 가정위주로 이루어져 왔다. 본 연구에서는 아세안 지역의 국가간 여객통행 수요예측을 위해 개발된 모형을 제시한다. 통행발생과 통행분포 모형을 개별적으로 추정하기에는 해당지역의 통계자료구축이 미흡한 상태이기 때문에 국가간 출입국 통계자료를 이용하여 통행발생과 통행분포를 동시에 고려하는 직접수요모형을 개발하였다. 또한 현재 연구대상지역의 경우 국가간 통행에 대한 수단선택모형이 존재하지 않기 때문에 본 연구에서는 수단분담율 산정을 위해 명시선호기법을 이용하여 수단분담모형을 추정하였다. 통행거리에 따른 수단선택행태의 차이를 반영하기 위해 세 개의 거리대로 구분하여 수단분담모형을 추정하였다. 추정결과 모형의 설명력과 변수의 유의성 측면에서 대체적으로 양호한 결과가 도출되었다. 본 연구에서 구축한 모형은 향후 아세안지역의 통행수요예측에 있어 참고자료로 활용될 수 있을 것으로 기대된다.

• 한국도로학회논문집
• /
• 제18권6호
• /
• pp.11-24
• /
• 2016

OBJECTIVES : This study aims to review a plan to reduce the shoulder width of a deformed round-trip two-lane highway with low traffic volume. METHODS : Installation of a passing lane on a round-trip two-lane (one-way one-lane) highway, and reduction of a shoulder for a round-trip four-lane highway. RESULTS : It is necessary to establish a design criterion for various highways, because the plan to reduce the lane or shoulder width of a highway with low traffic volume was analyzed to have an economic efficiency of 6.8~7.0%. CONCLUSIONS : It is necessary to seek for a plan to establish a national trunk net early by efficiently using the limited financial resources to cope with the traffic demand elastically.

• International Journal of Computer Science & Network Security
• /
• 제22권1호
• /
• pp.276-282
• /
• 2022

One of the most essential foundations upon which big institutions rely in delivering cloud computing and hosting services, as well as other kinds of multiple digital services, is the security of infrastructures for digital and information services throughout the world. Distributed denial-of-service (DDoS) assaults are one of the most common types of threats to networks and data centers. Denial of service attacks of all types operates on the premise of flooding the target with a massive volume of requests and data until it reaches a size bigger than the target's energy, at which point it collapses or goes out of service. where it takes advantage of a flaw in the Transport Control Protocol's transmitting and receiving (3-way Handshake) (TCP). The current study's major focus is on an architecture that stops DDoS attacks assaults by producing code for DDoS attacks using a cloud controller and calculating Round-Tripe Time (RTT).

• International Journal of Automotive Technology
• /
• 제4권3호
• /
• pp.149-156
• /
• 2003

This paper is concerned with the energy absorption efficiency of auto-body side structures for the conventional steel and 60TRIP high strength steel. In order to evaluate the energy absorption efficiency, the dynamic crash analysis is carried out with the regulation of US-SINCAP. The analysis adopts the Johnson-Cook model for the dynamic material properties, which have been obtained from dynamic material tests. For the sake of the dynamic material properties, the analysis has been accurately peformed for the crashworthiness assesment. The analysis result provides deformed shapes, amounts of penetration and accelerations at several important points during crash. The result confirms that 60TRIP greatly improves the crashworthiness of the side members without sacrificing the weight and thus can be used for the light-weight design of an auto-body.