• Spatial Information Research
• /
• v.22 no.5
• /
• pp.19-26
• /
• 2014

International attention on the Northern Sea Route has been increased as the decreased sea-ice extents in Northern Sea raise the possibility to develop new sea routes and natural resources. However, to protect ships' safety and pristine environments in polar waters, International Maritime Organization(IMO) has been developing the Polar Code to regulate polar shipping. The marine navigation supporting system is essential for ships traveling long distance in the Northern Sea as they are affected by ocean weather and sea-ice. Therefore, to cope with the IMO Polar Code, this research proposes the functional requirements to develop the marine navigation supporting system for the Northern Sea Route. The functional requirements derived from the IMO Polar code consist of arctic voyage risk map, arctic voyage planning and MSI(Marine Safety Information) methods, based on which the navigation supporting system is able to provide dynamic and safe-economical sea route service using the sea-ice observation and prediction technologies. Also, a requirement of the system application is derived to apply the marine navigation supporting system for authorizing ships operating in the Northern Sea. To reflect the proposed system in the Polar Code, continual international exchange and policy proposals are necessary along with the development of sea-ice observation and prediction technologies.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.6
• /
• pp.658-665
• /
• 2013

In this study, we measured particulate matter(PM) which emerged as the hot issue from the International Maritime Organization(IMO) and the exhaust emission using HANBADA, the training ship of Korea Maritime University. In particular, the PM was obtained with TEM grid. PM structure was observed by electron microscopy. And exhaust gases such as NOx, $CO_2$, and CO were measured using the combustion gas analyzer(PG-250A, HORIBA). The results of this study are as follows. 1) When the ship departed from the port, the maximum difference in PM emissions were up to 30 % due to the Bunker Change. 2) Under the steady navigation, emission of PM was $1.34mg/m^3$ when Bunker-A is changing L.R.F.O(3 %). And, at the fixed L.R.F.O (3 %), emission of PM was $1.19mg/m^3$. When the main engine RPM increased up to 20 % with fixed L.R.F.O(3 %), emission of PM was $1.40mg/m^3$. When we changed to low quality oil(L.R.F.O(3 %)), CO concentration from main engine increased about 16 %. On the other hand, when the main engine RPM is rising up to 20 %, CO concentration is increased more than 152 percent. These results imply that the changes of RPM is a dominant factor in exhaust emission although fuel oil type is an important factor. 3) The diameter of PM obtained with TEM grid is about $4{\sim}10{\mu}m$ and its structure shows porous aggregate.

• Journal of Navigation and Port Research
• /
• v.39 no.1
• /
• pp.45-53
• /
• 2015

These days Container Terminals are focusing on increasing the quantity of containers and shipping lines choose Terminals by referring to the key elements of a terminal to perform the overall operation the fastest such as the location of the terminal, discharging ability, keeping environment, and other elements related to shipping in general. Container terminal is able to offer On-Dock service has become an important factor for shipping lines to choose that terminal. In this paper, we propose an algorithm for On-Dock system work algorithm, the algorithm Empty container exports, Full Container algorithm and The aim of our study focus on both container's gate out time and search for the effective terminal operation which is using the general On-Dock system through several algorithm like container batch priority, gate in and out job priority and empty container yard equipment allocation rule based on the automatic allocation method and manual allocation scheme for container. Gathering these information, it gives the priority and yard location of gate-out containers to control. That is, by selecting an optimum algorithm container, container terminals Empty reduces the container taken out time, it is possible to minimize unnecessary re-handling of the yard container can be enhanced with respect to the efficiency of the equipment. Operations and operating results of the Non On-Dock and On-Dock system is operated by the out work operations (scenarios) forms that are operating in the real Gwangyang Container Terminal derived results. Gwangyang Container terminal and apply the On-Dock system, Non On-Dock can be taken out this time, about 5 minutes more quickly when applying the system. when managing export orders for berths where On-Dock service is needed, ball containers are allocated and for import cargoes, D/O is managed and after carryout, return management, container damage, cleaning, fixing and controlling services are supported hence the berth service can be strengthened and container terminal business can grow.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.2
• /
• pp.471-483
• /
• 2014

Since 2009 of global financial crisis, shipbuilding industry has undergone hard times seriously. After such a long depression, the latest global shipping market index shows that the economic recovery of global shipbuilding market is underway. Especially, nations with enormous resources are going to increase their productivity or expanding their shipyards to accommodate a large amount of orders expected in the near future. However, few commercial projects have been carried out for the practical shipyard layout designs even though those can be good commercial opportunities for shipbuilding engineers. Shipbuilding starts with a shipyard construction with a large scale investment initially. Shipyard design and the equipment layout problem, which is directly linked to the productivity of ship production, is an important issue in the production planning of mass production of ships. In many cases, shipbuilding yard design has relied on the experience of the internal engineer, resulting in sporadic and poorly organized processes. Consequently, economic losses and the trial and error involved in such a design process are inevitable problems. The starting point of shipyard construction is to design a shipyard layout. Four kinds of engineering parts required for the shipyard layout design and construction. Those are civil engineering, building engineering, utility engineering and production layout engineering. Among these parts, production layout engineering is most important because its result is used as a foundation of the other engineering parts, and also, determines the shipyard capacity in the shipyard lifecycle. In this paper, the background of shipbuilding industry is explained in terms of engineering works for the recognition of the macro trend. Nextly, preliminary design methods and related case study is introduced briefly by referencing the previous research. Lastly, the designed work of layout design is validated using the computer simulation technology.

• Journal of Fisheries and Marine Sciences Education
• /
• v.4 no.2
• /
• pp.121-128
• /
• 1992

Taking the present circumstances into account that we are approaching the realization stage of interchange and cooperation between North and South Korea through a preparatory stage, recovery of national homogeneity is an essential precondition for reunification. The important first Step is pursuing of recovery of educational homogeneity for this purpose. The authors carried out 8 general observation on the fundamental educational system with ideology, on the actual state and characteristic of educational system for industrial technicians, and especially on the educational system for fisheries technical manpower in the North Korea. It was found that the North Korea's basic idea of educational policy is constituted by bringing up the communistic human beings on the ground of "the Ideas of Identity" and by bringing up industrial technical manpower for development of communistic economic. The basic educational system consists of 1-4-6-4 school years system, and 11 years of compulsory education up to the higher middle schools is imposed to all people. The educational system for industrial technicians is also composed of the regular school system which is following the basic educational system and of the irregular school system which is being attached to the industrial bodies. The fisheries educational system is very similar to the general educational system for industrial technicians, and the fisheries workers are treated more warmly in comparison with the workers engaging in the other industrial fields. By this study, the authors failed to find out the concrete content of the fisheries educational system including the curriculum owing to the lack of information, but this task should be studied continuously to make provision of reunification in the near future. Expressly, a continuous and profound research is required to be carried out on actual accepted state of the international maritime conventions together with the marine officers' certification system for the shipping and fisheries fields in the North Korea.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.7
• /
• pp.4349-4356
• /
• 2015

This study examine operating system for eco-friendly container terminal and shows the usefulness of the Importance-performance analysis grid in evaluating container terminal operating technology. Importance-performance analysis enables management to evaluate and identify the major strengths and weaknesses of eco-friendly container terminal operating technology's key success factors. This study identified a list of 20 items from the eco-friendly container terminal literature reviews, and each item was rated using a 5-point Likert scale. Responses were obtained from 250 questionnaires. The importance-performance grid shows that 13 items fall into the "Keep up the good work" quadrant, 2 items fall into the "Concentrate here" quadrant, 2 items fall into the "Low priority" quadrant, and 3 items fall into the "Possible overkill" quadrant. The findings suggest that an eco-friendly container terminal operating technology is necessary to enhance eco-friendly operating system. The results are useful in identifying areas for strategic focus to help container terminal managers develop eco-friendly container terminal operating technology strategies.

• International Journal of Highway Engineering
• /
• v.10 no.2
• /
• pp.35-45
• /
• 2008

Trucking is the most frequently used mode for freight movement due to relatively lower shipping costs and its operational flexibility. However, truck traffic can contribute to serious safety problems where they occupy high percentage of the total traffic. Heavy truck crashes arc more likely to result in serious injuries and fatalities than are crashes involving light vehicles. Therefore, safety issues for truck traffic are very significant both for public agencies and for general travelers. The objective of our study is to find truck-involved accident patterns according to traffic conditions and main factors as well as to find the most critical factor through conventional statistical techniques. A vailable data were obtained from TASAS (Traffic Accident Surveillance and Analysis System). Once critical factors are identified, effective and efficient truck management strategies can be discussed.

• Journal of Environmental Science International
• /
• v.14 no.12
• /
• pp.1141-1153
• /
• 2005

Butyltin compounds (BTs), namely tributyltin (TBT), dibutyltin (DBT) and monobutyltin (MBT), were measured in surface and core sediments collected in 2001 inside Seogwipo Harbor, in order to evaluate their distribution characteristics. Seogwipo Harbor is one of major harbors of Jeju Island where a lot of shipping occurs and is designated as a trade port by the Korea Maritime and Port Law. BTs were detected in surface and core sediments of all stations and their concentrations in surface sediments were low, compared with to those in other sites of domestic and foreign countries. The main species among BTs was MBT, although there was a little difference with a survey site in surface sediments and in core sediments with depth. No or low correlations were obtained between organic matter or particles size of surface and core sediments and total BTs, indicating that these factors did not affect the distribution of BTs. It was estimated that more complex factors including BTs loads and surrounding sedimentary environments, affect the distribution of BTs. The high correlations between BTs indicated that DBT and MBT were mainly degraded from TBT based on antifouling paints of vessel etc. and other sources, such as DBT and MBT, could be ignored. The butyltin degradation indices ([DBT]+[MBT]/[TBT]) in surface sediments were in the range of $2.0\~3.8$ (mean 3.0), indicating that the parent compound, TBT, were inflowed into the surface sediments a long years ago, degraded and deposited. The sedimentation age of BTs contaminated core sediments could not estimated because the content of $^{210}pb$ activity were nearly all the same and so the sedimentation rate could not obtained.

• Journal of the Korean Institute of Navigation
• /
• v.16 no.2
• /
• pp.53-78
• /
• 1992

GMDSS-the Global Maritime Distress and Safety system which is utilizing the new technologies such as satellite communication system, DSC and NBCP-is effectuated not only by the amendment of SOLAS but also by the conference of RR and IMO's MSC, and will be the major factor of the variation of the demand and supply of Radio Operators. To cope with the GMDSS voluntarily, regulations relating to the radio installation, the posting of Radio Operators, the bounds of duty, etc. must be established and the demand and supply of Radio Operators which take charge of the system must be accomplished pertinently. In this study, the authors suggested some practical schemes to improve the effect of policy as follow. 1. The Ministry of Communication must supervise strictly the arrangement of Radio Operators, especially relating tot he legally qualified complement of Radio Station, and must review the official certification system to upgrade the quality of Radio Operators. 2. The Ministry of Communication must take overall charge of the qualitifications and technical standards of Radio Operators, the extent of their engagement, etc. which are provided by International Regulations. 3. Relating Administrations must cooperate with Shipping Companies in onboard-training to foster and ensure the manpower of Radio Operators. 4. Institutional devices to drive the resolute investment in education and training for mariners, especially for the ship's officers, must be prepared. 5. The Communication Administration and the Korea Maritime and Port Adminstration(KMPA) must cooperate mutually in the balance of the demand and supply of Radio Operators and use make their best to realize more harmonious policies on the demand and supply of manpower.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.4
• /
• pp.376-384
• /
• 2017

Ship's Bunkering Business is one of the essential businesses creating added values of the port as a hub for a stream of the international logistics. Regulatory considerations of ship's bunkering business should be made to create a more relevant system and stabilize the bunkering industry so that the ports may produce more substantial added values. This paper suggests revisions the Harbor Transport Business Act, the Marine Transport Act, putting forward an idea of unifying safety management systems, establishing a guideline for bunker quality managements, and changing the laws regarding any wrongdoings of bunker suppliers. In conclusion, in order to increase the managerial integrity of the bunkering operators, reasonable burdens should be distributed across the government, refinery companies and ship-owners to achieve a more balanced state and enable long-term development to advance the business at issue, following a step-by-step approach to amend the contract practice, the laws and the systems.