• Journal of Environmental Science International
• /
• v.7 no.6
• /
• pp.793-801
• /
• 1998

In this study, the Dilution Method is used to measure river discharge through the hydraulic model test. the dilution method is divided into Constant-Rate-Infection Method and Slug-Injection Method in the river discharge measurement techniques. When the dilution method is applied in the hydraulic model flume, it is analyzed that the estimated error of constant-rate-injection method is less than that of the slug-in-jection method, and the result shows that floodflow analysis is more efficient than lowflow analysis as compared observed discharge with calculated discharge. The result of statistical error analysis shows that the constant-rate-injection method is appropriate technique for the measurement of the river discharge. Therefore, the dilution method among the river discharge measurement techniques can be applied for the river basin which can't be measured with current meter or unsteady-flow regime in the urban-small drainage or hydraulic structure equipment area and can be obtained more exact results than any other discharge measurement techniques.

• Journal of Environmental Science International
• /
• v.13 no.11
• /
• pp.1001-1007
• /
• 2004

The rapid industrialization and urbanization in Osaka Bay have produced many serious water pollution problems since the 1960s. A symbolic phenomenon is algae bloom (red tide), which occurred 53 times in 1976. The special law was enacted in 1973 and a number of administrative steps were taken, such as cutting COD loading, reductions in phosphorus (P) and restriction of land reclamation. As a result, the pollution of Osaka Bay has gradually been reduced, and the environment has been improved to some extent. In this study, to analyze the relations between water qualities as well as a social, economic activity by the coastal zone, the water quality data in Osaka Bay of 70 years past since 1921 were collected. Data such as population, livestock, fertilizer, industrial product etc. were also collected for estimating nutrients flowing into bay from land. It was found that the water quality was changed of a similar trend of estimated nutrients load, with delay of about four or five years.

• Journal of Environmental Science International
• /
• v.4 no.1
• /
• pp.13-18
• /
• 1995

In order to examine the effect on the insolation of cloud cover, we analyzed the data of the insolation, cloud cover and surface air pressure in Pusan during the period of 1991. 10 - 1993.1. At first, we investigate the atmospheric transmissivity A(t) using the Beer's law at clear skies. The atmospheric transmissivity is characterized by cold season high and warn season low. From this atmospheric transmissivity, the empirical formula that shows the variation of the insolation due to the cloud cover is obtained. The result formula is I : l0 A(tn)·( 0.7-0.05×m ). 1 is the insolation that reaches the surface when cloud cover is m and to is solar constant. Although the result is some rough it seems meaningful that the estimation of insolation can be made only from the routine data.

• Journal of Environmental Science International
• /
• v.22 no.2
• /
• pp.173-185
• /
• 2013

In order to clarify the impact of wildfire and its thermal forcing on atmospheric wind and temperature patterns, several numerical experiments were carried out using three dimensional atmospheric dynamic model WRF with wildfire parametrization module SFIRE. Since wind can accelerate fire spread speed, the moving speed of fireline is faster than its initial values, and the fireline tends to move the northeast, because of the wind direction and absolute vorticity conservation law associated with driving force induced by terrain. In comparison with non-fire case, the hydraulic jump that often occurs over downwind side of mountain became weak due to huge heat flux originated by surface wildfire and wind pattern over downwind side of mountain tends to vary asymmetrically with time passing. Therefore temporal variation of wind pattern should be catched to prevent the risk of widfire.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.23 no.4
• /
• pp.7-15
• /
• 2017

Purpose: The Korean government has implemented a Barrier Free Certification System since 2008 to create a secure and convenient environment for the socially disadvantaged. The drastic increase in the number of BF-certification facilities is expected due to the revision of the system and increasing the number of certification institutions. An analysis of individual evaluation items needs to be made for the BF-Certification with public confidence. Method: Korean standard, International Standard(ISO/FDIS 21542, 2011), German Standard(DIN 18040-1, 2010), Austrian Standard(${\ddot{O}}NORM$ B 1600, 2017) and Swiss Standard(Norm SIA 500 / SN 521 500, 2009) were investigated and analyzed. A comprehensive improvement plan is proposed by comparing details of the aforementioned standards and the evaluation items of BF-Certification. Results: Many problems arise in applying existing Barrier-free standards due to changes in population structure, environmental change and the use of powered wheelchairs. International standards are being improved to solve these problems. The korean standards also require improving of the Barrier Free Law and Certification System, which reflect these trends. In korean cases, standards such as the size of the doors (width and height), the Unobstructed Manoeuvring Space and Clear Space at the Latch side of the Door are required to improve standards in accordance with international standards. In addition, the expression of laws and evaluation items of BF-Certification should be clearly defined. And the application of visual contrast standards for the enhancement of perceptions presented in international standards should be considered. Implication: Barrier Free related legal standards and evaluation items of BF-Certification that are used in Korea are required to be revised in consideration of social and environmental changes. Comprehensive improvements should be made through detailed review.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2002.11a
• /
• pp.39-44
• /
• 2002

Bans on TBT based antifouling paints have been drafted since 1999 by meetings 42, 43, 45 and 46 for the MEPC (Marine Environmental Protection Committee) of the International Marine Organization, and decided finally at a Diplomatic Conference of the IMO in October 2001. It was a key issue that there should be a global prohibition on the application of organo-tin compounds as biocides in Anti-fouling systems by Jan. 2003, and a complete prohibition on te presence of organo-tin compounds on ships by 1 Jan. 2008. This paper suggests a method to design International Anfi-fouling system cretificate, Record of anti-fouling system, Endorsement of the Records, Declaration on Anti-fouling System, Port State Control and reform(legislative) associated a law.

• Journal of Environmental Science International
• /
• v.18 no.12
• /
• pp.1325-1330
• /
• 2009

The fumigant 1,3-dichloropropene (1,3-D) was recently proposed as a direct replacement for methyl bromide ($CH_3Br$) in soil fumigation. This study was conducted to better understand behavior phase partitioning, diffusion and volatilization of 1,3-D as affected by isomer. The Henry's law constant(KH) of cis-1,3-D and trans-1,3-D was 0.058 and 0.037 at $20^{\circ}C$, respectively. $K_H$ of cis form of 1,3-D was higher than that of trans form of 1,3-D. To compare with volatilization of 1,3-D isomer, soil column [70 cm (length)${\times}$12 cm (i.d.)] included a shank injection at 30 cm with 300 kg $ha^{-1}$. Maximum cis-1,3-D and trans-1,3-D concentration reached 57 mg $L^{-1}$ and 39 mg $L^{-1}$ at 30 cm depth at 1h after application. Cumulatively, after 10 days, 51.8% and 43.57% of applied cis-1,3-D and trans-1,3-D was emitted via volatilization, respectively. The total losses of cis-1,3-D were significantly greater than that of trans-1,3-D. Finally, cis-1,3-D and trans-1,3-D, such as isomer are dominant of 1,3-D fates in soil.

• International Journal of Concrete Structures and Materials
• /
• v.10 no.1
• /
• pp.113-124
• /
• 2016

This paper presents the effect of silica fume and nano silica, used individually and in combination with the set accelerator and/or hydrated lime, on the properties of class F high volume ultra fine fly ash (HV-UFFA) cement composites, replacing 80 % of cement (OPC). Compressive strength test along with thermogravimetric analysis, X-ray diffraction and scanning electron microscopy were undertaken to study the effect of various elements on the physico-chemical behaviour of the blended composites. The results show that silica fume when used in combination with the set accelerator and hydrated lime in HV-UFFA cement mortar, improves its 7 and 28 day strength by 273 and 413 %, respectively, compared to the binary blended cement fly ash mortar. On the contrary, when nano silica is used in combination with set accelerator and hydrated lime in HV-UFFA cement mortar, the disjoining pressure in conjunction with the self-desiccation effect induces high early age micro cracking, resulting in hindering the development of compressive strength. However, when nano silica is used without the additives, it improves the 7 and 28 day strengths of HV-UFFA cement mortar by 918 and 567 %, respectively and the compressive strengths are comparable to that of OPC.

• Journal of Environmental Science International
• /
• v.14 no.6
• /
• pp.605-611
• /
• 2005

The aim of this study was to analyze the local distribution of the heavy metal concentration in Daegu and Ulsan which were divided into the residual areas, the traffic dense areas and the industrial areas. The Inductively Coupled Plasma(ICP) was used to analyze heavy metals, such as As, Cr, Hg, Zn, Cd, Pb, Cu and minor metals, such as Fe, Si, Mg, Ca, AI, Na, K. The results of this analysis showed that the content of heavy metals which was classified by districts in Daegu and Ulsan was the highest in the industrial areas followed by the traffic dense areas and the residual areas. Compared to the level of heavy metals of national and local soil survey network in 2003, contamination of heavy metals in Daegu was lower than national average. However, the content of Cd, As, Zn in Ulsan was respectively 13.38 times, 472 times and 2.65 times higher than national average contamination. In addition, compared to the soil pollution level of the environmental protection law, contamination of all areas in Daegu was lower. But the content of As at the industrial areas in Ulsan was 10.71 times higher than standard of soil pollution and 4.28 times higher than standard of measures against soil contamination.

• International Journal of Railway
• /
• v.4 no.2
• /
• pp.42-49
• /
• 2011

Today, rolling stock has become a fast and convenient mode of transportation and has witnessed increased demand. But the speed improvement has resulted in increased aerodynamic noise and therefore residential districts near the railroad tracks are exposed to ever increasing noise level. A study on methodologies for measuring and appraising rolling stock's environmental noise has therefore become an important area of endeavor. In the case of the environmental noise, there are no changes in tone so prediction can be made by reducing areas around the railway. The present study explores estimation of the noise around the railway using scale model, and the source of the noise has been investigated as well. The scale model of rolling stock will have to be able to measure high frequency noise and it is required to be generated in a short amount of time. Since popping a balloon or firing a gun fits this requirement the present study analyzed the characteristics of these two different noise sources. Measurement was made in a large vacant lot and the reflection due to the ground was also examined. The method proposed here can be used in the future for predicting the environmental noise of railway vehicles.