• Restorative Dentistry and Endodontics
• /
• 제20권2호
• /
• pp.789-801
• /
• 1995

Canals with artificially made internal resorption were filled with 4 techniques(Lateral condensation, Ultrafil, Obtura II, Thermafil) to compare the efficacy of canal filling according to the filling techniques. After canal filling, radiographic examination, dye penetration through the apical portion and percentage of G-P filled area on the internal resorption area were evaluated. To examine the degree of crystal-like structure and the interface between filled G-P and canal wall, SM and SEM images were taken too. The results were as follows : 1. There was no statistically significant difference in apical microleakage among the 4 root canal filling techniques. 2. As a result of radiographic examination, Ultrafil was the best and Obtura II was acceptable but Lateral condensation and Thermafil showed unfavorable canal filling pattern similarly. 3. Ultrafil filled most of artificially made internal resorption area and Obtura II, Lateral condensation, Thermafil in that order filled unfavorably. 4. Degree of crystal like structure was the highest in the group filled with Ultrafil and those of Obtura II and Thermafil were similar and that of gutta percha used in Lateral condensation showed the lowest value. 5. Penetration of gutta percha into the dentinal tubules couldn't be seen in all groups. In the contact surface between the filled G-P and the canal wall, Lateral condensation showed relatively close sealing, Obtura II and Thermafil had irregular contact surface and Ultrafil showed regular filling pattern. 6. Contact surface between the core of Thermafil and the gutta percha showed close relationship without gap formation.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.571-582
• /
• 2010

전동차 중정비 시 대치차 기어의 비파괴검사 방법으로는 일반적으로 침투비파괴검사를 적용하고 있다. 침투비파괴검사는 결함의 미세한 개구부 속으로 침투액을 투입하여 표면에 잔류하는 여분의 침투액을 제거하고 현상제를 도포하여 결함지시 모양을 관찰하여 탐상하는 방법이다. 그러나 이 방법은 기어를 조립상태에서 침투비파괴검사를 실시하므로 많은 문제점이 있다. 치면의 각도가 급경사를 이루므로 충분한 침투가 어렵고 과잉제거의 문제가 있다. 그에 비해 자분비파괴검사는 표면 하 결함은 물론 미세한 결함 검출에 용이하다. 시험결과 치면에 응력이 집중되어 내부결함 및 미세결함이 존재하는 경우 침투비파괴검사로 발견되지 않는 경우가 있으나 자분비파괴 검사로 미세한 결함까지 발견 할 수 있었다. 따라서 전동차 대치차 기어의 합리적인 비파괴검사법은 자분을 사용한 비파괴검사가 적합하다고 판단한다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권6호
• /
• pp.73-81
• /
• 2012

콘크리트 구조물은 일반적으로 동결융해 작용을 받는 조건에 노출되고, 이러한 동결융해작용은 콘크리트의 공극구조를 변화시키고, 콘크리트의 내구성을 저하시킬 우려가 있다. 따라서 본 연구에서는 동결융해작용에 의한 콘크리트 내부공극구조 변화와 동결융해작용을 받은 콘크리트의 내구특성을 평가하고자 하였다. 실험결과, 기존의 동결융해 평가기법에 따르면 모든 배합에서 우수한 내구성능을 나타내었으나, 동결융해 작용에 노출됨에 따라 50~100nm 크기의 공극이 크게 증가하며, 콘크리트 염화물침투저항성이 저하하였다. 수중양생 콘크리트의 공극구조와 염화물 침투저항성은 선형관계를 보이지만, 동결융해작용을 받으면 내부공극구조의 변화로 선형관계가 저하하였다. 동결융해작용과 염화물침투를 동시에 받는 구조물의 내구성 평가기준에 대한 재검토가 필요할 것으로 판단된다.

• 한국공간구조학회논문집
• /
• 제18권2호
• /
• pp.59-67
• /
• 2018

Various pilotis are installed in the lower part of high rise buildings. Strong winds can generate sudden airflow around the pilotis, which can cause unexpected internal airflow changes and may cause damage to the exterior of the piloti ceiling. The present study investigates the characteristics of peak wind pressure coefficient for the design of piloti ceiling exteriors by conducting wind pressure tests on high rise buildings equipped with penetration-type and end-type pilotis in urban and suburban areas. The minimum peak wind pressure coefficient for penetration-type piloti ceilings ranges from -2.0 to -3.3. Minimum peak wind pressure coefficient in urban areas was 30% larger than in suburban areas. In end-type piloti ceilings, maximum peak wind-pressure coefficient ranges from 0.5 to 1.9, and minimum peak wind-pressure coefficient ranges from -1.3 to -3.6. With changes in building height, peak wind pressure coefficient decreases as the aspect ratio increases. Peak wind-pressure coefficient increases with taller pilotis. On the other hand, when piloti height decreases, the absolute value of the minimum peak wind pressure coefficient increases.

• 한국농공학회지
• /
• 제26권1호
• /
• pp.29-37
• /
• 1984

This study was made to find several significant relations among various physical and mechanical properties including cone penetration resistance. The alluvial clay samples were taken at the Daebul Reclaimed Tideland in Samhomyeon, Yeongamgun, Jeonranamdo. The results of the study are summarized as follows; 1.Most samples belong to medium or high plastic, inorganic, silty clay(clay contents;32-64%, silt contents; 36-68%, sand contents; 0-3%). The specific gravities range from 2.70 to 2.73, the unit weights from 1.45 to 1. 75g/cm$^3$, the natural moisture contents from 45 to 77%, the liquid limits from 32 to 56%. It is certain that the foundation is weak because the natural moisture contents are much higher than the liquid limits. 2.It is known from the shear tests that the unconfined compression strenghs vary from 0.09 to 0. 38kg/cm2, the cohesions from 0.05 to 0. 21kg/cm2, the internal friction angles from 0 to 3˚. 3.The consolidation tests show that the initial void ratios range from 1.25 to 2.28, the compression indeices from 0.43 to 0.84, the preconsolidation loads from 0.21 to 0.74kg/cm$^2$. 4.Cone penetration resistances are usually less than 5kg/cm$^2$ from ground surface to the depth of about 8m, and from S to l0kg/cm$^2$ in the layer below about 8m to hard layer. 5.The cohesion and cone penetration resistance are in proportion to the depth of soil layer. 6.The correlations between various physical and mechanical properties including cone penetration resistance for the alluvial clay samples are as follows; a) Wn=0.944C+ l2.733 (r=0.829) b) LL=0. 728Cy+6. 991 (r=0. 873) c) PI=0.659Cy-8.168 (r=0.860) d) rt=0. 0077(272-Wn) =2.092-0. 0077Wn (r=0. 859) e) 60=0. 035wn-0 447 (r=0. 893) f) C=0.380qw+0.031 (r=0.816) g) qu=0.0707qc+0.029 (r=0.810) h) C=0.018Z+0.055 (r=O.802) I) qc=0. 415Z+1, 438 (r=0. 943)

• 원예과학기술지
• /
• 제32권4호
• /
• pp.454-462
• /
• 2014

'홍로'/M.9 사과나무 세장방추형의 생산성을 높이기 위하여 수고에 따른 투광율, 투약율, 수체생육, 과실 품질, 그리고 노동 생산성을 비교 분석하였다. 수고가 높을수록 수관내부, 특히 낮은 수관위치에서의 투광률은 감소하였다. 엽면적지수(LAI)는 수고가 높을수록 증가하였으나 엽면적지수의 증가는 수관 내부 농약 살포 효과를 감소시켰다. 신초 생장은 수고가 높을 때 가늘고 길게 자라는 경향이었고, 과실의 착색도는 수고가 높을 때 감소하였으나, 과실 경도와 산함량은 차이가 없었다. 수고가 높을 때 주당 착과수는 증가하였으나, 305g 이상의 대과 생산량은 감소하였다. 수고가 높아질수록 적화, 적과, 전정, 수확 등에 필요한 노동력은 증가하였으나, 높은 수고에서의 노동력 증가는 고소작업차를 투입하여 해결할 수 있었다. 4.5m 수고에서 적화 작업의 경우 사다리보다 전동고소작업차를 이용했을 때 작업시간은 14.6분/주가 절약되었다. 투광율 향상과 과실착색도 증진을 위하여 수관내부의 광환경 개선이 필요함을 알 수 있다.

• 대한한방내과학회지
• /
• 제23권2호
• /
• pp.280-285
• /
• 2002

Pruritus is [CHECK DEFN] itchy feeling of one's skin. We often face stroke patients who complain about Pruritus. They occasionally fail to fall asleep or have a secondary infection as a result of scratching. For these reasons, severe Pruritus brings down general condition and interferes with recovery. The causes of Pruritus are distributed to from skin diseases and from internal diseases. Especially among the skin diseases, Xerotic Eczema, which is called Senile Eczema causes the dry skin in the elderly, especially lower limb's extensor part. According to the epidemiology, 20% of the old have Xerotic Eczema. In oriental medicine, Pruritus is called Pungsoyang(風瘙痒), Pungyang(風痒), Yangpung(痒風), Sinyang(身痒). The cause of Pruritus is divided into two. One is endogenous factors and the other is exogenous factors. The former are deficiency of blood(血虛), blood fever(血熱), wind-heat due to internal damage(內傷風熱), damp-heat in the liver and gallbladder(肝膽濕熱), endogenous wind stirring in the liver(肝風內動), deticiency syndrome of the spleen(脾虛), deficiency of Yin of the liver and kidneys(肝腎陰虛) and deficiency of the Penetration and Conception Vessels(衝任不足). The latter are wind-cold due to exogenous affection(外感風寒) and wind-heat due to exogenous affection(外感風寒). We report two stroke patients who complained of severe Pruritus They were diagnosed as having Xerotic Eczema by a dermatologist. We regarded their Pruritus as blood fever(血熱) and wind-heat(風熱) and prescribed Sopung-San to these patients. These patients showed significant improvement.

• 자원환경지질
• /
• 제50권2호
• /
• pp.145-157
• /
• 2017

최근 집중강우로 인하여 전국적으로 산사태 및 사면붕괴 현상이 빈번히 발생하고 있다. 이러한 산지 및 비탈면에서 발생하는 자연재해에 대한 대책안 마련 및 설계 입력자료로서 지반의 강도정수(전단강도)를 도출해야만 한다. 그러나 현재 산지 및 비탈면에 접근하여 지반조사를 하기 위해서는 과다한 산림훼손과 많은 경제적인 비용 등이 요구되어진다. 따라서 본 연구에서는 현장에서 인력운반이 가능한 경량화된 소형동적콘관입시험기를 제작하여 다수의 지역에 대한 지반의 특성 및 강도정수를 산출하였다. 그리고 국내 및 외국의 소형동적콘관입시험 방법에 대해서 연구 분석하여 국내에 적합한 콘 재료와 시험방법을 제안하였으며, 대표적인 지역을 대상으로 현장에서 콘관입시험 Nc값과 표준관입시험 N값과 비교 분석하였다. 이와 더불어 직접전단시험 및 공내전단시험을 실시하여 토층심도별, 기반암별, 흙의 분류별 그리고 #200번체 통과량별로 Nc값과 전단강도와의 상관관계를 분석하였다. 특히 본 연구에서는 산지조건에서 가장 많이 분포하는 사질토를 대상으로 Nc값에 대응하는 전단강도(점착력 및 내부마찰각)와의 상관식을 제안하여 산지 토층에 대한 효율적인 지반강도정수를 산출하도록 하였다.

• Journal of Microbiology and Biotechnology
• /
• 제21권10호
• /
• pp.1081-1087
• /
• 2011

An internally radiating photobioreactor was applied for the production of astaxanthin using the unicellular green alga Haematococcus pluvialis. The cellular morphology of H. pluvialis was significantly affected by the intensity of irradiance of the photobioreactor. Small green cells were widespread under lower light intensity, whereas big reddish cells were predominant under high light intensity. For these reasons, growth reflected by cell number or dry weight varied markedly with light conditions. Even under internal illumination of the photobioreactor, light penetration was significantly decreased as algal cells grew. Therefore, we employed a multistage process by gradually increasing the internal illuminations for astaxanthin production. Our results revealed that a multistage process might be essential to the successful operation of a photobioreactor for astaxnthin production using H. pluvialis.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1377-1380
• /
• 2008

An irradiation test of a nuclear fuel rod having external and internal tube structure was planned for a performance. To establish fabrication process satisfying the requirements of irradiation test, micro-TIG welding system for fuel rods was developed, and preliminary welding experiments for optimizing process conditions of fuel rod was performed. Fuel rods with 15.9mm diameter and 0.57mm wall thickness of cladding tubes and end caps have been used and optimum conditions of endcap welding have been selected. In this experiment, the qualification test was performed by tensile tests, helium leak inspections, and metallography examinations to qualify the endcap welding procedure. The soundness of the welds quality of a dual cooled fuel rods has been confirmed by mechanical tests and microstructural examinations.