• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.3
• /
• pp.236-241
• /
• 2003

This paper addresses the optimal design of dividing wall distillation column which is rapidly applied in a variety of chemical processes over recent several years because of its high energy saving efficiency. A general dividing wall column model which can cope with the heat transfer through the dividing wall is developed using rigorous computer simulation. Based on the simulation model, the effects of the internal recycle flow distribution around the dividing wall and the heat transfer across the dividing wall on overall system performance are investigated. An improved column design method is suggested to utilize the heat transfer through the wall. The suggested method is compared with the existing method via simulation study in which the proposed design shows improved energy saving result.

• International Journal of Control, Automation, and Systems
• /
• v.3 no.spc2
• /
• pp.315-321
• /
• 2005

Interactions among multiple control functions of a UPFC installed in a power system have been observed in power system simulation and been reported in authors' previous publications [1,2]. This paper presents new analytical results about these observed interactions and concludes that they are due to the control conflict between the series and shunt part of the UPFC, which are connected through the internal common capacitor inside the UPFC. Investigation in the paper reveals, for the first time as far as the authors are aware of, that the linkage pattern of UPFC series and shunt part decides whether the control functions implemented by the UPFC series and shunt part conflict each other or not. This linkage pattern of UPFC series and shunt part can be described by the flow of active power through the UPFC at steady-state operation of the power system. Hence in order to predict the possible interactions among multiple control functions of the UPFC, an interaction indicator is proposed in the paper which is the direction and amount of active power flow through the internal link of the UPFC series and shunt part at steady-state operation of the power system. This proposed interaction indicator can be calculated from power system load flow solution without having to run simulation of the power system with UPFC controllers installed. By using the indicator, the interactions among multiple control functions of the UPFC caused by badly set controller's parameters are excluded. Therefore the indicator only identifies the possible existence of inherent control conflict of the UPFC.

• Transactions of the Korean hydrogen and new energy society
• /
• v.27 no.3
• /
• pp.311-317
• /
• 2016

This paper presents the flow characteristics of a ball valve used for a gas pipeline. Understanding of the internal flow of a ball valve is an important to analyze the physical phenomena of the valve. Present experimental study was performed by IEC 60534-2-3, the international standard for an industrial control valve testing procedure. Pressure measured at upstream and downstream of the valve, flow-rate and gas temperature passing the inside of the gas pipeline were measured with respect to valve opening rates. Throughout the experimental measurement of the ball valve, empirical equation of the pressure drop between the ball valve according to the mass flow rates is successively obtained using a polynomial curve fitting method. In addition, flow coefficient for determining the valve capacity is also analyzed with respect to valve opening rates using the curve fitting method.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3074-3079
• /
• 2007

The conventional control valves have been used at the locations occurring high differential pressure and high temperature which causes cavitation, flashing, severe vibration due to abrupt flow change, and sudden pressure drop. Previous studies concerning control valves focused to prevent damage of valve trim due to the internal leak and low flow rate. The newly designed helical trim of control valve has been installed at the location of high pressure change and high temperature in a power plant, and operated for evaluation. It is confirmed that the new control valve developed in this study generates flow characteristics in comparison with previous helical trim of control valves.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.5 no.1
• /
• pp.107-124
• /
• 1998

Based on King's goal attainment theory, this research deals with applying nursing intervention of mutual goal settings to gastrectomy patients. It tests the effects of nursing intervention, according to the patients' health locus of control, suggested as external boundary criteria for the theory by employing a quasi-experimental design which consists of a pretest-posttest non-equivalent control and experimental groups. The subjects of this research were 62 gastrectomy patients hospitalized at Y medical center and the experimental and control groups consisted of 31 subjects. The experimental group received nursing intervention at the mutual goal setting of 5 times from the day before the surgery to the 5th day after the surgery, while the control group received only routine nursing care. Recovery indicators of both groups were measured and compared. Measurement variables included patients' characteristics, health locus of control, forced vital capacity, forced expiratory volume in one second, peak expiratory flow, bowel movement recovery, mobility recovery, level of pain, patients' stress and patients' satisfaction. Data were analyzed using SPSS statistical package and the hypotheses were tested by ANOVA and ANCOVA. Results of the analyses are summarized as follows : 1) Internal health locus of control had higher effects of the nursing intervention of mutual goal setting than external health locus of control on pulmonary ventilatory functions of forced vital capacity, forced expiratory volume in one second, and peak expiratory flow. 2) There was no statistically significant difference in the effects of nursing intervention of mutual goal setting on the bowel movement recovery between the internal and external health locus of control. 3) There was no statistically significant difference in the effects of nursing intervention of mutual goal setting on the mobility recovery between the internal and external health locus of control. 4) There was no statistically significant difference in the effects of nursing intervention of mutual goal setting on the level of pain between the internal and external health locus of control. 5) There was no statistically significant difference in the effects of nursing intervention of mutual goal setting on the level of stress between the internal and external health locus of control. 6) There was a statistically significant difference in the effects of nursing intervention of mutual goal setting on the level of satisfaction with provision of nursing information between the internal and external health locus of control, and there was no statistically significant difference in the effects of nursing intervention of mutual goal setting on the level of satisfaction with outcome of nursing between the internal and external locus of control. On the basis of the research results, the following are recommended : 1) Repeated research on responses to health locus of control is necessary. 2) Not only the effectiveness of nursing intervention in acute recovery periods, but also the long term effects are to be investigated. 3) The development of instruments is needed to accurately measure mutual goal setting regarding postoperative deep breath, coughing, early ambulation, etc. so that the relationship among the postoperative recovery indicators may be explored. 4) It is required that an instrument be developed to measure perception which facilitates goal attainment in the interactive setting between patients and nurses.

• Journal of Korea Water Resources Association
• /
• v.37 no.12
• /
• pp.1043-1054
• /
• 2004

An unsteady flow model for channel network including various internal boundaries if developed. It is a multiply-connected network model based on the Preissmann's four-point scheme and the Newton-Raphson method, where looped double-sweep algorithm is used. The model is capable of simulating flow through hydraulic structures such as dams and submerged weirs. It can also simulate automatic reservoir operation method (Auto ROM) for flood control, that is to maintain a target water level, by incorporating the strategy to the unsteady flow model as internal boundary condition. The model is applied to the Han River system that includes the downstream reaches of Choongju dam and Hwacheon dam as well as the downstream reach of the Paldang dam. Roughness coefficient for the downstream reach of Choongju dam is estimated. Automatic ROM is presumed for the Paldang, Chungpyung, Euiam, and Choonchun dams. The model is tested using historical flood records, and the flood control strategy is successfully simulated.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.4
• /
• pp.451-459
• /
• 1998

THe influence of internal acoustic exitation through a square prism on the turbulent wake flow characteristics was investigated. The intermediate wake region where is about ten times the respective length of the body was experimentally investigated using a conditional phase average technique. At first the static base pressures of square prism and the shedding frequencies have been measured at various internal acoustic exciation frequencies. The experiment were performed under the four cases of internal acoustic excitation frequencies 0Hz 30Hz($St_e$=0.09) 65Hz($St_e$=0.20) 120Hz($St_e$=0.38) And velocity vector fields were presented and discussed. The influence of acoustic exvitation frequencies on the structure of intermediate turbulent wake region is evident. As the internal acoustic frequency increased shedding frequency gradually increased and aerodynamic force decreased. Also it was found that the vortex shedding occurs dratically well and shedding frequency reached nearly the same value as the internal acoustic frequency. but above Strouhal number 0.3 the influence disappeared.

• The Journal of Korean Medicine
• /
• v.18 no.1
• /
• pp.456-469
• /
• 1997

The cerebral infarction arised from occulsion of cerebral artery has a high mortality rate and fatal sequelae. Sohabhyangwon(蘇合香元) is generally regarded to have a effect of walking up the patient from unconsiousness and promoting the flow of Qj(氣) by warming channel. METHOD The purpose of this study is to find out the effections of Sohabhyangwon(蘇合香元) on regional cerebral blood flow and relative cerebral infarction area in the experimentally induced infartion in rats In this experiment, 12 Spraque-Dawley rats weighting 280-350g were used. Cerebral ischemia induced by intraluminal suture technique of Kozumi's and Zea-Longer's method. $Co_{2},\;O_2$, pH, arterial blood pressure in rats were checked by Blood Gas Analyzer every 30 minutes for 2 hours. And regional cerebral blood flow were checking by hydrogen clearance technique, cerebral infarcted area was megsured by Image Analysis System. RESULTS 1. During the experiment, $CO_{2},\;O_2$, pH, arterial blood pressure in rats had no change in both sample group and control group. 2. Cortical cerebral blood flow decreased at same rate in both sample group and control group after inducing cerebral infarction. 3. On comparison of relative cerebral infarcted area, Sohabhyangwon(蘇合香元) perfused group showed a significant decrease. CONCLUSION According to the result above, Sohabhyangwon has a protection effect on cranial nerve and-has no effect on cerebral blood flow.

• Biomedical Science Letters
• /
• v.11 no.4
• /
• pp.435-439
• /
• 2005

To determine the appropriate concentration of papaverine hydrochloride(PPV) for therapeutic intraarterial infusion against cerebral vasospasm and to measure the mean blood flow velocity of the middle cerebral artery in rabbits. Vasospasm was induced in the experimental groups (3 days after infusion; group 1, n=3, 7 days after infusion; group 2, n=3) and a control group (n=l) by placing a blood clot in the subarachnoid space around the top of the internal carotid siphon. PPV (5 mg/kg) was infused into the internal carotid artery. The vascular diameters of the internal carotid artery (ICA) and middle cerebral artery (MCA) were measured on angiograms before and after infusion. The mean blood flow velocity in the MCA was measured on transcranial doppler sonograms before and 24 hours after infusion. After fixation, the MCA was dissected out, stained, and examined microscopically. After PPV infusion in both groups, vascular dilatation of about $20\%$ was seen. The mean increase in blood flow velocity in the group $1(30\%)$ was smaller than in the group $2(70\%)$. The mean blood flow velocity in the MCA decreased by about $30\%$ in both groups, but increased again after 24 hours nearly to the level before PPV infusion. PPV infusion may be more effective in early stages of vasospasm when vascular walls have fewer histologic changes.

• 한국전산유체공학회:학술대회논문집
• /
• 2005.10a
• /
• pp.219-222
• /
• 2005

Recently, the interest of the engine capacity and environment of the atmosphere is increasing, so the researches for the engine capacity have been conducted for a long time. But the internal environment of an automotive engine is very severe. A piston is exposed to combustion gas of over $2000^{\circ}C$ and strong friction is occurred by high speed motion in the cylinder. The fraction between piston and wall of the cylinder causes the increase of temperature in the engine. The temperature of the engine has an effect on the engine capacity. If the temperature is high, the capacity of the engine is low. So we have to maintain the optimum temperature. To maintain the optimum temperature, the enough flow rate of the engine oil is needed. The oil jet is used to control the flow rate of the engine oil and supply the engine oil to the piston and cylinder. The purpose of this study is to check the mass flow rate of the engine oil and the characteristics of internal flow of the oil jet. Flow pattern of the engine oil is very important because it concludes the loss in the oil jet. This study is the previous research about the oil jet and we will consider the movement of the ball check valve to get more accuracy result.