• 국제초고층학회논문집
• /
• 제4권2호
• /
• pp.153-160
• /
• 2015

As the predominant mode of vertical urban development in China, mixed-use complexes provide the optimal case for the research of sustainable and vertical urbanism. This paper reviews three typical mixed-use complexes with various vertical space systems in Shanghai via the combination of field observation, questionnaires and software analysis. It then proceeds to determine which vertical space system is most effective for encouraging sustainable vertical urban development from the perspective of spatial efficiency. Finally, it concludes with an evaluation of the relative capabilities of the design features of a mixed-use complex: to create external dimensional-connections, to create multiple internal connections, and to organize overall composite functions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.251-254
• /
• 2001

Internal and external forces may be applied on the power cable in the both process of transportation and installation. Even though the EHV power cables have the structure of metal sheath and plastic jacket etc. to minimize these negative influences, the unusual forces result in the unexpected deformation of the cable. Compressing moulded XLPE model cable sheets were prepared and locally dented with round-edge and square-edge tools. All data were analyzed employing Weibull distribution. The breakdown strength of dented molded specimens showed lower values than the normal ones by 10-60%.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1992년도 봄 학술발표회 논문집
• /
• pp.143-147
• /
• 1992

Description of the behavior of the R.C structural members fixed on massive concrete is not normally generalization of recognized configuration for regular R.C. design guidanes. This can be due to the complexity of evaluation of internal resistancy and deflection changes of the members subjected to the various external forces. On the base of axially loaded member fixed on footing, however, the estimation of deflection changes due to flexural force shear force and rotational force is to be carried out in ways of specifying the bond characteristics of axial bars embedded in massive concrete. This work is to quantify adhesion of steel-concrete, initial concrete cracking stress near bar rib, maximum bond stress and residual stress in concrete respectively. In addition to quantification of them for particulate behavior, the suggestions of multi-linear bond stress-slip diagram made in carrying out finite element analyses for adhesion failure, examining concrete cracking status and reviewing existing experimental data lead to alternatively constructed relationship between bond stress and slip for a axial bars embedded massive concrete.

• Tuberculosis and Respiratory Diseases
• /
• 제86권3호
• /
• pp.226-233
• /
• 2023

Background: Inactive or old, healed tuberculosis (TB) on chest radiograph (CR) is often found in high TB incidence countries, and to avoid unnecessary evaluation and medication, differentiation from active TB is important. This study develops a deep learning (DL) model to estimate activity in a single chest radiographic analysis. Methods: A total of 3,824 active TB CRs from 511 individuals and 2,277 inactive TB CRs from 558 individuals were retrospectively collected. A pretrained convolutional neural network was fine-tuned to classify active and inactive TB. The model was pretrained with 8,964 pneumonia and 8,525 normal cases from the National Institute of Health (NIH) dataset. During the pretraining phase, the DL model learns the following tasks: pneumonia vs. normal, pneumonia vs. active TB, and active TB vs. normal. The performance of the DL model was validated using three external datasets. Receiver operating characteristic analyses were performed to evaluate the diagnostic performance to determine active TB by DL model and radiologists. Sensitivities and specificities for determining active TB were evaluated for both the DL model and radiologists. Results: The performance of the DL model showed area under the curve (AUC) values of 0.980 in internal validation, and 0.815 and 0.887 in external validation. The AUC values for the DL model, thoracic radiologist, and general radiologist, evaluated using one of the external validation datasets, were 0.815, 0.871, and 0.811, respectively. Conclusion: This DL-based algorithm showed potential as an effective diagnostic tool to identify TB activity, and could be useful for the follow-up of patients with inactive TB in high TB burden countries.

• 보건교육건강증진학회지
• /
• 제29권4호
• /
• pp.1-13
• /
• 2012

Objectives: By analysing the recent trends of published papers in the Korean Journal of Health Education and Promotion, this study aims to identify and discuss some challenging issues, and to provide recommendations for quality improvement of the research papers. Methods: One hundred and sixty five papers published between 2009 and 2011 were examined and categorized according to selected standards. Results are displayed in frequencies and percentages. Results: The volume of articles published has increased by two-folds in three decades since the publication of the first issue. More than 90% of the papers were original articles. Cross-sectional research design was most frequently applied, while only 11.5 % of the articles were intervention studies. For cross-sectional research articles, limitation in generalizability of the study findings was mentioned as one of the major issues, in relation with the frequent use of convenient sampling methods and lack of theoretical evidence in inclusion of variables. Consideration of internal and external validity of the study, utilization of scientific evaluation design and mixed evaluation methods were recommended for intervention research to improve the quality of the research results. Conclusion: To serve as a key resource for evidence-based practices in health promotion, more strict scientific research criteria should be applied to the articles published in the Korean Journal of Health Education and Promotion.

• 산업경영시스템학회지
• /
• 제38권3호
• /
• pp.95-99
• /
• 2015

The IRR(internal rate of return) is often used by investors for the evaluation of engineering projects. Unfortunately, it has serial flaws: (1) multiple real-valued IRRs may arise; (2) complex-valued IRRs may arise; (3) the IRR is, in special cases, incompatible with the net present value (NPV) in accept/reject decisions. The efforts of management scientists and economists in providing a reliable project rate of return have generated over the decades an immense amount of contributions aiming to solve these shortcomings. Especially, multiple internal rate of returns (IRRs) have a fatal flaw when we decide to accep it or not. To solve it, some researchers came up with external rate of returns (ERRs) such as ARR (Average Rate of Return) or MIRR (MIRR, Modified Internal Rate of Return). ARR or MIRR. will also always yield the same decision for a engineering project consistent with the NPV criterion. The ERRs are to modify the procedure for computing the rate of return by making explicit and consistent assumptions about the interest rate at which intermediate receipts from projects may be invested. This reinvestment could be either in other projects or in the outside market. However, when we use traditional ERRs, a volume of capital investment is still unclear. Alternatively, the productive rate of return (PRR) can settle these problems. Generally, a rate of return is a profit on an investment over a period of time, expressed as a proportion of the original investment. The time period is typically the life of a project. The PRR is based on the full life of the engineering project. but has been annualised to project one year. And the PRR uses the effective investment instead of the original investment. This method requires that the cash flow of an engineering project must be separated into 'investment' and 'loss' to calculate the PRR value. In this paper, we proposed a tabulated form for easy calculation of the PRR by modifing the profit and loss statement, and the cash flow statement.

• 소성∙가공
• /
• 제32권4호
• /
• pp.180-190
• /
• 2023

This study deals with residual stress prediction and hardness evaluation within cross ball grooved inner race fabricated by cold upsetting process consisted of upsetting and ejection steps. A raw workpiece material of AISI 5120H (SCr420H) is first spheroidized and annealed, then phosphophyllite coated to form solid lubricant layer on its outer surface. To investigate influences of the heat treatment, uni-axial compression tests and Vickers micro-hardness measurements are conducted. Three-dimensional elasto-plastic FE simulations on the upsetting step and the ejection one are performed to visualize the residual stress and the ductile (plastic deformation) damage. External feature of the fabricated inner race is fully captured by using an optical 3D scanner, and the micro-hardness is measured on internal cross-sections. Consequently, the dimensional compatibility between the simulated inner race and the fabricated one is ensured with a difference of under 0.243mm that satisfied permissible error range of ±0.50mm on the grooved surface, and the predicted residual stress is verified to have similar distribution tendency with the measured Vickers micro-hardness.

• 정보처리학회논문지B
• /
• 제16B권4호
• /
• pp.289-298
• /
• 2009

능동 윤곽선 모델, 즉 스네이크 알고리즘은 물체 탐지 및 추적에 사용되는 유용한 알고리즘이다. 그러나 이 알고리즘은 요소별 가중치 부여 및 반복단계 시 많은 변수가 필요하고, 초기화 애로 및 계산상 불안정성 등의 단점이 있다. 따라서 본 논문에서는 이러한 단점을 개선하여 보다 효과적인 이동물체 탐지 및 추적을 위해 기존 스네이크 알고리즘의 외부 에너지를 개선한 새로운 에너지 보정 스네이크(ECS) 알고리즘을 제안한다. 이를 위해 이동물체 이동 시 획득한 차영상 이미지를 4개의 방향성 이미지로 복사하고 각 이미지 픽셀에 대해 누적 연산 후 에너지 강화배열 내 저장 및 노이즈 제거를 통해 안정적인 이미지, 즉 외부 에너지를 획득한다. 또한 별도로 계산된 내부 에너지를 통해 얻어진 윤곽선(contour)을 외부 에너지에 병합함으로써 빠르고 쉬운 이동물체 탐지 및 추적이 가능하다. 제안한 알고리즘의 효용성을 확인하기 위해 3가지 상황을 대상으로 실험하였다. 실험 결과, 제안한 알고리즘이 기존 스네이크 알고리즘에 비해 탐지율은 평균 6$\sim$9%, 추적율은 6$\sim$11% 정도의 향상을 보였다.

• 한국의류산업학회지
• /
• 제11권3호
• /
• pp.390-398
• /
• 2009

The research purposes are (1) to identify male market segmentation based on fashion involvement, (2) to compare purchase intention of clothing items and store attribute evaluation at two different retail formats, department store and internet shopping mall, and (3) to compare the influence of store attributes on intention to purchase fashion products at two retail formats among segments. The data are collected from 275 male consumers through internet research institute. The major results of this study are as follows. First, the dimensions of fashion involvement are identified into external involvement and internal involvement. Male respondents present high mean scores on external involvement items, emphasizing social roles of clothing. Two involvement factors generate three market segments: high involvement group(32.4%), external involvement group(44%), and low involvement group(23.6%). Second, high involvement group shows higher mean scores on purchase intention of seven clothing items than low involvement group. Third, department store attributes are identified into four factors, product assortment, quality per price, service, and symbolic image, while internet shopping mall includes assortment & convenience, quality per price, and symbolic image. High involvement group again presents higher mean scores on each retail attribute factor than low involvement group. Finally, quality per price is the most significant variable to explain the purchase intention at department store among three market segment, whereas assortment & convenience and quality per price are important predictors to increase purchase intention at internet shopping mall. However, relative importance of each attribute variable is different among three involvement groups.

• 한국정밀공학회지
• /
• 제30권9호
• /
• pp.977-982
• /
• 2013

Blades of wind energy plants are exposed to external shocks or internal cracks during operation. Furthermore, the blade surfaces can be contaminated by substances such as dust, blood of birds, salt or insects which can decrease the electricity generation efficiency significantly. For this reason, many blade cleaning companies started to appear and a variety of methods for cleaning were suggested. Despite these diverse methods, there has been no study to investigate how effectively to clean the substances in quantitative manner. In this paper, the cleaning efficiency of two rotor blade cleaning methods, brush and water-jet, is examined through experiments by changing operating parameters. Then, the optimal operating conditions for both methods are derived.