• Journal of information and communication convergence engineering
• /
• 제6권2호
• /
• pp.172-176
• /
• 2008

This paper presents a novel feeding structure of the triple-band internal antenna which covers CELLVLAR/DCS/US-PCS bands. The proposed antenna consists of a U-slot patch radiator with a shorting post connected with ground plane and symmetric feeding lines with respective a feeding and shorting posts on both faces of the fixed FR-4 substrate. Through the simulation and experimental results, the proposed antenna is confirmed to have the features of less interference with a human head/body, broad bandwidth, desirable radiation patterns and efficiency for triple-band applications.

• 한국ITS학회:학술대회논문집
• /
• 한국ITS학회 2010년도 춘계학술대회
• /
• pp.104-106
• /
• 2010

• The Journal of the Korea institute of electronic communication sciences
• /
• 제8권10호
• /
• pp.1427-1434
• /
• 2013

In this paper, triple band mobile chip antenna for DCS(1.71~1.88GHz) / PCS(1.75~1.87GHz) / UPCS(1.85~1.99GHz) on PCB Layout is designed. To analyze the characteristics of the designed antenna, we designed and measured Single, Dual, Triple Band antenna. The designed antenna was fabricated and measured using vector network analyzer in LTK(Laird Technologies Korea). Triple and wide band characteristic could be realized the measured bandwidth(V.S.W.R<2.0) of designed antenna operated in the band of 1.71GHz~1.99GHz. This antenna has a small size of about $19mm{\times}4mm{\times}1.6mm$, narrow bandwidth which is a defect of chip antenna is improved. And its experimental results were a good agreement with simulation performance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제18권5호
• /
• pp.503-510
• /
• 2007

This paper proposes the design scheme of internal triple band antenna intended for using in GSM900, DCS1800, and PCS1900 bands. The suggested folding metal plates of the two branches are mounted on a dielectric coated ground plane for size miniaturization and durability. Return losses are overlapped when length of metal branches are controlled. This is important technique for wide band operation. For the suggested antenna geometry its return loss was calculated by HFSS 9 simulator, and was shown to be -10 [dB] less within the required band. Also, gain and radiation pattern of antenna were measured using far field measurement system in an anechoic chamber. The measured peak gain is more than 3.0 [dBi], and the average gain is over -1.0 [dBi] for the triple band, which is regarded as satisfactory for the internal antenna application. Also, the radiation pattern for two frequencies shows a similar shape each other within the required band.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제18권10호
• /
• pp.1189-1195
• /
• 2007

We design and fabricate, in this parer, a triple band folded monopole antenna for the folder type mobile phone handset that can be served GSM/DCS/USPCS mobile phone system. Antenna structure is modified meander shape which is obtained both extension of antenna physical length for GSM band and same directional multi-currents flowing on the antenna conductor surface for DCS/USPCS band. This antenna has as good performances as high radiation resistance and gain increment, and would be applied to mobile phone handset that is not able to be performed by internal antenna. By measurement, fabricated antenna by the press process shows under VSWR 3:1 at closed folder state and 2:1 at opened folder state over whole GSM/DCS/USPCS band, and has maximum gain as -0.02 dBi for GSM, +0.2 dBi for DCS, +0.78 dBi for USPCS band with almost omnidirectional H-plane radiation pattern.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• 제44권12호
• /
• pp.73-78
• /
• 2007

In this paper, the CPW-fed triple-band internal planar monopole antenna which simultaneously meets the three bands such as Cellular, PCS and Wibro is designed. The size of the radiation elements can be reduced to about $\lambda/4$ by designing the CPW-fed monopole antenna and then we can miniaturize the antenna size by meandering the radiation elements. In addition, we design the planar antenna for the slim-type mobile phone. We can obtain the desired antenna properties by controlling the length of each radiation elements. The measured return loss of the antenna is less than -7 dB at the desired bandwidth. And the measured radiation patterns are similar to that of the monopole antenna. The designed antenna has the gains -5.2 dBi. -2 dBi, -0.4 dBi at each resonant frequencies respectively.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• 제11권4호
• /
• pp.171-174
• /
• 2011

In this paper, transformed IFA design is proposed to improve the antenna gain of GSM/DCS/PCS band. New antenna structure has been approved to be more convenient matching in the mobile phone terminal and increase gains and expansion bandwidth through the simulation and real measurement. According to measurement, it's shown 1.57dB higher average gain than conventional IFA.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제13권7호
• /
• pp.1261-1266
• /
• 2009

In this paper, triple band mobile chip antenna for DCS(1.71${\sim}$1.88GHz) / PCS(1.75${\sim}$1.87GHz) / UPCS(1.8S${\sim}$1.99GHz) on PCB Layout is designed. To analyze the characteristics of the designed antenna, we used commerical simulation tool(HFSS). Triple and wide band characteristic could be realized the measured bandwidth(V.S.W.R<2.0) of the designed antenna operated in 1.71GHz${\sim}$1.99GHz. The size of the designed antenna is about 19mm${\times}$4mm${\times}$1.6mm, narrow bandwidth which is a defect of chip antenna is improved. And its experimental results were a good agreement with simulation performance.

• 한국ITS학회:학술대회논문집
• /
• 한국ITS학회 2004년도 제3회 정기총회 및 추계학술대회
• /
• pp.220-223
• /
• 2004

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국해양정보통신학회 2008년도 춘계종합학술대회 A
• /
• pp.681-684
• /
• 2008

In this paper, triple band mobile chip antenna for DCS($1.71{\sim}1.88GHz$) / PCS($1.75{\sim}1.87GHz$) / UPCS($1.85{\sim}1.99GHz$) on PCB Layout is fabricated. As designed and fabricated antenna is loaded PCB layout, that plate a both side at two independence patterns(upper & lower) to reduce the size and a capacitor for DCS, PCS, UPCS band is proposed. The antenna has a small size of about $19mm{\times}4mm{\times}1.6mm$, narrow bandwidth which is the defect of chip antenna is improved. Bandwidth of fabricated antenna to VSWR less than 2 is satisfied and all bandwith is acquired 15.1 % at $1.71GHz{\sim}1.99GHz$.