• Journal of Applied Reliability
• /
• v.17 no.2
• /
• pp.136-142
• /
• 2017

Purpose: In this paper, we propose a test method for evaluating the life time of the inverter which is one of the main internal configuration systems in order to evaluate the life time of the power supply for the vehicle. Methods: The performance and failure criteria required for the development of the accelerated life test method were established and the Taguchi method was used to derive the stress factors affecting performance and reliability. Results: The major stress of the product degradation were considered to be high temperature. Conclusion: The acceleration factor was estimated through a two-level high temperature test and a test methods was designed to guarantee the accelerated life time of the inverter.

• The Journal of the Korea Contents Association
• /
• v.12 no.4
• /
• pp.426-437
• /
• 2012

The purpose of this study is to investigate the relationship between internal service quality, internal customer satisfaction and management outcome of airport security agents. This study had selected special securities from Incheon airport of October, 2011 for population. Using judgment sampling method, 282 samples were drawn and were used for the final analysis. Questionnaire used in study is composed of total 43 questions and using SPSSWIN 18.0, frequency analysis, factor analysis, reliability analysis, multiple regression analysis and path analysis were performed. Cronbach's ${\alpha}$ value which shows the reliability of the survey came out to be over .686. The conclusion is following: First, internal service quality of airport security agents affects internal customer satisfaction. That is, as corporality, responsiveness and empathy increase, internal supply satisfaction and job satisfaction also increase. Second, internal service quality of airport security agent affects job performance. That is, as corporality, reliability and responsiveness increase, non-financial performance and financial performance also increase. However, when empathy is not activated well, financial performance is decreased. Third, airport security agent…s internal customer satisfaction affects job performance. That is, as activation of internal supply satisfaction increases, nonfinancial performance and financial performance are increased. Fourth, airport special security agent…s inside quality of service exerts direction indirect effect in inside customers satisfaction and management result. That is, inside customers satisfaction is an important variable that mediate inside quality of service and management result.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.25 no.4
• /
• pp.27-35
• /
• 2019

Purpose: As the improvement in quality of medical environment and the spatial consideration for the prevention of infection in the hospital have become increasingly important in the recent years, specific and practical planning for air conditioning room's area has become a major issue accordingly. However, the air conditioning room tends to be discussed focusing on technical factors such as air conditioning systems that are irrelevant to building plans, while discussions of most departments related to the medical functions have actively taken placed. Therefore, this study aims to investigate the factors influencing the planning for the air conditioning room area, and through subsequent analysis of the area of the air conditioning room, to propose a way to improve effective planning for the air conditioning room area. Methods: This study examines the case hospitals that fall into two types: each floor supply system and concentrated supply system, and compares and analyzes the air conditioning room area-related factors and the characteristics of changes in the interior of air conditioning room before and after remodeling through air conditioning floor plan of those case hospitals. Results: The air conditioning room can be classified into the net area of the functional space such as duct passages, and the public area such as aisle space, and of those the public area is an important factor in calculating the area of the air conditioning room. The public area of the air-conditioning room should not be planned considering only the spaces for mobile passage or maintenance activities, but should be planned taking into account internal changes such as expansion and replacement of equipment in the future from the beginning. Implications: When planning a medical facility, it is used as basic data for the planning of the air conditioning room area, which is a significant fixed factor in the initial setting.

• Journal of the Korean Institute of Plant Engineering
• /
• v.23 no.4
• /
• pp.5-19
• /
• 2018

Recently, utilizing the supply chain among companies, major companies support their sub-vendors to establish an environmental management system and transfer the clean production technology(know-how) to them for strengthening of environmental competitiveness. Thus, Green Supply Chain Management(GSCM) became a key successful factor for companies to be environmentally sustainable. This research endeavors to identify the relationship among the inside and outside GSCM implementation activities of Korean manufacturing companies and their financial, operational and environmental performances. Based on a the review of previous research findings, twenty one hypotheses are developed and examined. Total 251 valid responses from 1,634 survey responses are identified and the structural equation models(SEM) are developed and analysed for examining our hypotheses. The result shows that inside GSCM has a positive effect on outside GSCM. Also, it reveals that companies' performances are more positively affected by inside GSCM than by outside GSCM.

• Journal of the Korean Solar Energy Society
• /
• v.28 no.6
• /
• pp.70-77
• /
• 2008

The purpose of this study evaluates a feasibility and economical efficiency of new renewable energy. According as weather change is serious problem now days, every people make attention to the reduction of greenhouse gas. The revitalization of new renewable energy creates the variety of energy source, stability of energy supply and reduction of greenhouse gas. In this study evaluates a feasibility and economical efficiency from new renewable energy of various photo voltaics, wind power, small hydro and biogas. Feasibility does in standard of technical characteristic, politic support, marketability, establishment present condition and development aim. Economical efficiency does in standard of developmental unit cost, utilization factor, equipment life, politic support cost, interest ratio. The results of this study were as follows photo voltaics, wind, small hydropower, biogas in order feasibility is high. Developmental unit cost, utilization factor, equipment life, politic support cost and analyzed the relationship of interest ratio fluctuation and economical efficiency. From all new renewable energy the utilization factor most is important in economical efficiency but necessary utilization factor is difficult because environmental problem.

• Journal of Korean Society of Water and Wastewater
• /
• v.36 no.5
• /
• pp.261-273
• /
• 2022

In this study, we collect water control valves that have had accidents due to existing cracks, etc. are collected, and propose investigation items for strengthening the valve structural safety evaluation through a series of analyzes from valve specifications to physicochemical properties are proposed. The results of this study are as follows. First, there was a large variation in the thickness of the body or flange of the valves to be investigated, which is considered to be very important factor, because it may affect the safety of the valve body against internal pressure and the flange connected with the bolt nut. Second, 60% of the valves under investigation had many voids in the valve body and flange, etc. and the decrease in thickness due to corrosion was relatively large on the inner surface in contact with water rather than the outer surface. It is judged that the investigation of depth included voids is very important factor. Third, all valves to be investigated are made of gray cast iron foam, and therefore it is judged that there is no major problem in chemical composition. It is judged that the chemical composition should be investigated. Fourth, as a physical investigation item, the analysis of metal morphology structure seems to be a very important factor for nodular cast iron from rather than a gray cast iron foam water valve with a flake structure. As it was found to be 46.7~68.8% of the standard recommended by KS, it could have a direct effect on damage such as cracks, and therefore it is judged that the evaluation of tensile strength is very important in evaluating the safety of the valve.

• Fire Science and Engineering
• /
• v.30 no.2
• /
• pp.87-91
• /
• 2016

Recently, it has been increasing an incidence of heart diseases which is a causative factor in sudden death as Korean population structure has been changing to an aging society. There is growing needs for A portable ventilator which automatically be operated by the pressure of the supplied oxygen and has been spread worldwide. So, we would like to present test methods in accordance with the performance requirements which are important for components of a respirator and a portable ventilator itself. And also would like to find the most suitable condition of internal pressure reduction for the performance requirements according to the changing conditions of internal pressure reduction setting of a portable ventilator.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.39-44
• /
• 2009

Geothermal energy is the heat contained in the earth and its internal fluids. Geothermal energy is stored as sensible or latent heat. Supplied by both internal and external sources, it represents a vast supply which is only started to be tapped for generation of electric power. In general, this is natural dry or wet medium to high enthalpy steam at temperatures above $150^{\circ}C$. For some time, binary systems employing substances with a lower boiling point than water in a secondary circuit have been used to generate vapor for driving turbines at a lower temperature level. The utilization of binary plants and the possibility of production from enhanced geothermal systems can expand its availability on a worldwide basis. The geothermal electricity installed capacity is approaching the 10,000GW threshold. Geothermal energy is not present everywhere, but its baseload capability is a very important factor for its success.

• Journal of the Korea Convergence Society
• /
• v.4 no.2
• /
• pp.15-20
• /
• 2013

This study aims to determine factors related for manufacturers to use distributors storehouse and its cost efficiency in Supply Chain. When manufacturers which have relationships with Big distributors determine the way of their logistics, they can use their own warehouse, or the distributors', or outsource its function. In which case the manufacturers face the cost efficiency of using warehouse will be different, therefore, the driven factors will exist internally or externally. The findings of this study are that internal factors(brand value, product portfolio, and technological capabilities), external factors(technological characteristics, demands fluctuations, and munificence), and transaction characteristics(transaction experiences, dependency) would be driven factor between manufacturer and distributors in supply chain. These driven factors effects manufacturers transactions power on their distributors.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1070_1071
• /
• 2009

Recently, small hydropower attracts attention because of its clean, renewable and abundant energy resources to develop. Therefore, a cross-flow hydraulic turbine is proposed for small hydropower development in this study. The turbine‘s simple structure and high possibility of applying to the sites of relatively low effective head and large flow rate can be advantages for the introduction of the small hydropower development. The purpose of this study is not only to investigate the effects of air layer in the turbine chamber on the performance and internal flow of the cross-flow turbine, but also to suggest a newly developed air supply method. CFD analysis for the performance and internal flow of the turbine is conducted by an unsteady state calculation using a two-phase flow model in order to embody the air layer effect on the turbine performance effectively. The result shows that air layer effect on the performance of the turbine is considerable. The air layer located in the turbine runner passage plays the role of preventing a shock loss in the runner axis and suppressing a recirculation flow in the runner. The location of air suction hole on the chamber wall is very important factor for the performance improvement. Moreover, the ratio between air from suction pipe and water from turbine inlet is also significant factor of the turbine performance.