• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.3
• /
• pp.1057-1062
• /
• 1991

본 연구에서는 형상을 미소하게 변화시켜 좌굴을 방지할 수 있는 최적 도움형 상을 설계하였고 타원형, 토리-구형도움의 가장 얕은 형태의 최적도움형상도 설계하였] 으며, 실제 적용예를 수치로 제시하였다. 또한 수압(hydrostatic pressure)을 받는 수조(reservoir)의 도움형상에 대해서도 직경 및 길이 변화에 따른 형상설계 결과를 제시하였다.

• The Journal of Internal Korean Medicine
• /
• v.25 no.2
• /
• pp.268-276
• /
• 2004

Objective : Peroxynitrite $(ONOO^-)$, formed from the reaction of $O_2^-$ and NO, is a cytotoxic species that can oxidize several cellular components such as proteins, lipids and DNA. It has been implicated in the aging process and age-related disease such as Alzheimer's disease, rheumatoid arthritis, cancer and atherosclerosis. The aim of this study was to investigate scavenging activities of $ONOO^-$ and its precursors. NO and $O_2^-$ and its scavenging mechanism using fluorescent probes, DCFDA, DAF-2 and DHR 123.. Methods : Psoralea corylifolia was crushed. The crushed Psoralea corylifolia was extracted 3 times, each time with 3 volumes of methyl alcohol at $60^{\circ}C$ for 24 h. The extract was filtered and evaporated under reduced pressured using a rotary evaporator to yield 16g. This was done to investigate scavenging activities of $ONOO^-$, NO, $O_2^-$ and its scavenging mechanism using fluorescent probes, DCFDA, DAF-2 and DHR 123. Results : After Psoralea corylifolia was added authentic $ONOO^-,\;{\cdot}\;O_2^-$ and NO was markedly scavenged. Also, $ONOO^-$ induced by $O_2^-$ and NO (these derived from SIN-1) was inhibited. The data showed a decrease in $ONOO^-$ mediated nitration of tyrosine through electron donation after Psoralea corylifolia was added. Data showed a dose-dependent correlation with inhibition of nitration of bovine serum albumin induced by $ONOO^-$, Furtheremore, LPS-induced ROS and RNS generation was blocked. Conclusions: These results suggest potential for use of Psoralea corylifolia as an effective $ONOO^-$ scavenger to counter the aging process and age-related diseases.

• Journal of Korean Society for Atmospheric Environment
• /
• v.32 no.3
• /
• pp.320-328
• /
• 2016

Among biogenic volatile organic compounds (BVOCs) in the natural ecosystem, monoterpenes, along with isoprene, play important roles in atmospheric chemistry and make significant impacts on air pollution and climate change, especially due to their contribution to secondary organic aerosol production and photochemical ozone formation. It is essential to measure monoterpene concentrations accurately for understanding their oxidation processes, emission processes and estimation, and interactions between biosphere and atmosphere. Thus, traceable calibration standards are crucial for the accurate measurement of monoterpenes at ambient levels. However, there are limited information about developing calibrations standards for monoterpenes in pressured cylinders. This study describes about developing primary standard gas mixtures (PSMs) for monoterpenes at about 2 nmol/mol, near ambient levels. The micro-gravimetric method was applied to prepare monoterpene (${\alpha}$-pinene, 3-carene, R-(+)-limonene, 1,8-cineole) PSMs at $10{\mu}mol/mol$ and then the PSMs were further diluted to 2 nmol/mol level. To select an optimal cylinder for the development of monoterpene PSMs, three different kinds of cylinders were used for the preparation and were evaluated for uncertainty sources including long-term stability. Results showed that aluminum cylinders with a special internal surface treatment (Experis) had little adsorption loss on the cylinder internal surface and good long-term stability compared to two other cylinder types with no treatment and a special treatment (Aculife). Results from uncertainty estimation suggested that monoterpene PSMs can be prepared in pressured cylinders with a special treatment (Experis) at 2 nmol/mol level with an uncertainty of less than 4%.

• Asia pacific journal of information systems
• /
• v.11 no.1
• /
• pp.91-115
• /
• 2001

Faced with tougher competition in global, organizations are pressured to improve organizational productivity, including information systems(IS) departments. Especially related to IS, trying to remain competitive and up-to-date in rapidly changing world is becoming a financial burden to many organizations. Through outsourcing, organizations can provide better services and acquire and maintain a competitive advantage. In recent years IS outsourcing related researches have appeared in trade and academic literature. However the research on accounting information systems(AIS) outsourcing is very little or limited. This study attempts to empirically test the relationship between determinant factors and the degree of accounting information systems outsourcing as well as the relationship between success factors and the interactions between the degree of accounting information systems outsourcing and outsourcing success. Based on the previous studies on IS outsourcing and its related theories, determinant factors(transaction characteristic, resource performance, and risk dependence) and success factors(monitor, participation, and vendor capability) were identified and their measures were developed. Empirical results demonstrate that the change in the degree of AIS outsourcing is determined by the specificity of accounting information asset, uncertainty, the effect of internal AIS, AIS cost-effectiveness, and cost increase risks, and that monitor and vendor capability are implementation factors determining the degree of outsourcing success.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.7
• /
• pp.7-12
• /
• 2010

In this paper, chip-on-glass(COG) interconnection with anisotropic conductive film(ACF) using lateral thermosonic bonding technology is considered. In general, thermo-compression bonding which is used in practice for flip-chip bonding suffers from the low productivity due to the long bonding time. It will be shown that the bonding time can be improved by using lateral thermosonic bonding in which lateral ultrasonic vibration together with thermo-compression is utilized. By measuring the internal temperature of ACF, the fast curing of ACF thanks to lateral ultrasonic vibration will be verified. Moreover, to prove the reliability of the lateral thermosonic bonding, observation of pressured mark by conductive particles, shear test, and water absorption test will be conducted.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.17 no.2
• /
• pp.93-103
• /
• 1981

It is well-known that nowadays heat resisting and anti-corrosive materials have been widely used as the components materials of gas turbines, nuclear power plants and engines etc. In the fields of machine production industry. And materials for engine components, like as the exhaust valve of internal combustion engine, have been required to operate under the high temperature range of $700^{\circ}C$-$800^{\circ}C$ and high pressured gas with repeated mechanical load for the high performance of engines. For these components, friction welding for bonding of dissimilar steels can be applied for in order to obtain process shortening, production cost reduction and excellent bonding quality. And age hardening recently has been noticed to the heat resisting materials for further strengthening of high temperature strength, especially high temperature fatigue strength. However, it is difficult to find out any report concerning the effects of age hardening for strengthening high temperature fatigue strength to the Friction welded heat resisting and anti-corrosive materials. In this study the experiment was carried out as the high temperature rotary bending fatigue testing under the condition of $700^{\circ}C$ high temperature to the friction welded domestic heat resisting steels, SUH3-SUS303, which were 10hr., 100hr. aging heat treated at $700^{\circ}C$ after solution treatment 1hr. at $1, 060^{\circ}C$ for the purpose of observing the effects of the high temperature fatigue strength and fatigue fracture behaviors as well as with various mechanical properties of welded joints. The results obtained are summarized as follows: 1) Through mechanical tests and micro-structural examinations, the determined optimum welding conditions, rotating speed 2420 rpm, heating pressure 8kg/mm super(2), upsetting pressure 22kg/mm super(2), the amount of total upset 7mm (heating time 3 sec and upsetting time 2 sec) were satisfied. 2) The solution treated material SUH 3, SUS 303, have the highest inclination gradient on S-N curve due to the high temperature fatigue testing for long time at $700^{\circ}C$. 3) The optimum aging time of friction welded SUH3-SUS 303, has been recognized near the 10hr. at $700^{\circ}C$ after the solution treatment of 1hr. at $1, 060^{\circ}C$. 4) The high temperature fatigue limits of aging treated materials were compared with those of raw material according to the extender of aging time, on 10hr. aging, fatigue limits were increased by SUH 3 75.4%, SUS 303 28.5%, friction welded joints SUH 3-SUS 303 44.2% and 100hr. aging the rates were 64.9%, 30.4% and 36.6% respectively. 5) The fatigue fractures occurred at the side of the base matal SUS303 of the friction welded joints SUH 3-SUS 303 and it is difficult to find out fractures at the friction welding interfaces. 6) The cracking mode of SUS 303, SUH 3-303 is intergranular in any case, but SUH 3 is fractured by transgranular cracking.