• 제어로봇시스템학회논문지
• /
• 제7권7호
• /
• pp.582-588
• /
• 2001

The Multiple Model/Controller IMC(MMC-IMC) is a model-based control method which uses a set of model/controller pairs rather than a single model/controller to handle all possible operating conditions in the IMC control structure. During operation, one model/controller pair that best fit, for current plant situation is chosen by the switching algorithm. The major drawback of the switching controller is the bad transient performance due to the model error and the use fo linear controller for nonlinear plants. In this paper, we propose a method that transient response of the MMC-IMC using two recurrent neural networks. Simulation result shows that the proposed method represents better performance than the usual MMC-IMC`s.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.241-244
• /
• 1996

This paper discusses the general properties and the design procedures of Internal Model Control(IMC) scheme for nonlinear plants. Also we propose new nonlinear IMC(NIMC) design method using linear IMC. Although all IMC controllers can be thought simple 'inverse controller', its nonlinear realization is not easy. Propose NIMC is composed multiple linear models, IMC controllers, and switching scheme. The advantages of this method are we can use simple linear IMC design method and need not nonlinear modelings.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1209-1212
• /
• 1996

In this paper, we design a stabilizing controller with disturbance rejection properties for multirate sampled-data systems which have periodic output measurement scheme. We assume that the plant is open-loop unstable and the disturbance consists of a sum of finite number of sine waves with different frequencies. A sufficient condition for maintaining observability in multirate sampled-data systems is derived. The proposed controller has an IMC structure and can be decomposed into the filtered-disturbance estimator and the inverse of the fast uniform sampled model of the pre-stabilized plant. An example is presented for illustrations.

• 한국산학기술학회논문지
• /
• 제13권12호
• /
• pp.6027-6033
• /
• 2012

본 논문은 릴레이 피드백을 이용한 주파수 영역에서 내부 및 외부 모델을 동정하고 이 모델을 바탕으로 IMC-Cascade 제어기 파라미터 자동 동조 알고리즘을 제안하였다. 모델 동종 방법은 정상상태와 과도상태를 고려하여 1차의 지연모델로 동정 하였으며, 내부 제어기 및 외부 제어기의 제어 파라미터는 동정된 모델을 활용하여 성능지수 ITAE값이 최소로 되도록 자동동조 하였다. 시뮬레이션 결과 제안된 방법이 기존의 방법보다 우수함을 확인할 수 있었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.139-144
• /
• 1993

In this paper, a robust reduced order adaptive controller is proposed based on Internal Model Control(IMC) structure for stochastic linear stable systems. The concept of gain margin is utilized to make the adaptive IMC controller robust. We prove the stability of the proposed adaptive IMC system for stable plants under the assumption that upper bounds for system orders are known. Simulation results show that the proposed method has good performance and stability robustness.

• International Journal of Safety
• /
• 제5권2호
• /
• pp.6-11
• /
• 2006

The time delay in servo control on LonWorks/IP Virtual Device Network (VDN) is highly stochastic in nature. LonWorks/IP VDN induced time delay deteriorates the performance and stability of the real-time distributed control system and hinders an effective preventive and predictive maintenance. Especially in real-time distributed servo applications on the factory floor, timely response is essential for predictive and preventive maintenance. In order to guarantee the stability and performance of the system for effective preventive and predictive maintenance, LonWorks/IP VDN induced time delay needs to be predicted and compensated for. In this paper position control simulation of DC servo motor using Zero Phase Error Tracking Controller (ZPETC) as a feedforward controller, and Internal Model Controllers (IMC) based on Smith predictor with disturbance observer as a feedback controller is performed. The validity of the proposed control scheme is demonstrated by comparing the IMC based on Smith predictor with disturbance observer.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.236-236
• /
• 2000

Control of Industrial processes is very difficult due to nonlinear dynamics, effect of disturbances and modeling errors. M.Morari proposed Internal Model Control(IMC) system that can be effectively applied to the systems with model uncertainties and time delays. The advantage of IMC systems is their robustness with respect to a model mismatch and disturbances. But it was difficult to apply for nonlinear systems. Adaptive Neuro-Fuzzy Inference System which contains multiple linear models as consequent part is used to model nonlinear systems. Generally, the linear parameters in neuro-fuzzy inference system can be effectively utilized to identify a nonlinear dynamical systems. In this paper, we propose new IMC design method using adaptive neuro-fuzzy inference system for nonlinear plant. Numerical simulation results show that proposed IMC design method has good performance than classical PID controller.

• 제어로봇시스템학회논문지
• /
• 제7권11호
• /
• pp.958-961
• /
• 2001

Control of Industrial processes is very difficult due to nonlinear dynamics, effect of disturbances and modeling errors. M.Morari proposed Internal Model Control(IMC) system that can be effectively applied to the systems with model uncertainties and time delays. The advantage of IMC is their robustness with respect to a model mismatch and disturbances. But it is difficult to apply for nonlinear systems. ANFIS(Adaptive Neuro-Fuzzy Inference System) which contains multiple linear models as consequent part is used to model nonlinear systems. Generally, the linear parameters in ANFIS can be effectively utilized to control a nonlinear systems. In this paper, we propose new ANFIS-based IMC controller for nonlinear systems. Numerical simulation results show that the proposed control scheme has good performances.

• 전자공학회논문지B
• /
• 제33B권11호
• /
• pp.22-30
• /
• 1996

In this paper, the properties and the design procedures of the internal model control (IMC) structures are discussed and a new nonlinear IMC(NIMC) strategy is proposed. The IMC controllers are simply inverse controller in principle but the development of a NIMC poses difficulties due to the inherent complexity of nonlinear systems. Existing design mehtods are a few and not easy to implement. The proposed approach is using multiple linear models, linear IMC controllers, and swiching scheme instead of using nonlinear model/controller. The advantages of the new approach are that we can use linear IMC mehtod which are now well estabilished and need not global nonlinear models.

• 전자공학회논문지SC
• /
• 제46권3호
• /
• pp.8-14
• /
• 2009

본 논문은 성능 향상을 위하여 IMC 제어 구조를 갖는 PID 제어기 설계를 제안했다. 내부 모델은 최종값 정리와 유전자 알고리즘을 이용하여 2차의 지연시간을 갖는 모델로 동정 하였다. 그리고 제어기 파라미터 값은 성능지수 (IAE, ITAE)값이 최소가 되도록 내부 모델과 수치적 계산에 의해서 자동 동조된다. 시뮬레이션을 통하여 다양한 공정에 대하여 본 논문에서 새롭게 제안된 방법이 기존의 방법보다 우수함을 확인 할 수 있었다.