• 대한토목학회논문집
• /
• 제36권3호
• /
• pp.395-406
• /
• 2016

도시화로 인한 인구집중 및 개발 집중현상으로 하천변 저지대 및 지하공간 사용이 증가하였고, 불투수층이 증가하여 도시유역의 배수체계는 우수관거에 의존하고 있다. 이러한 변화로 인한 우수관거의 저류용량 부족 및 외수위의 영향으로 인한 도심지 역류 현상으로 인한 침수피해가 발생하고 있다. 하지만 기존의 홍수범람에 관한 연구는 대부분 외수범람과 내수침수를 유기적으로 연결하지 못하고 있다. 본 연구에서는 상습침수가 발생하는 도시유역에 대하여 도시유역 유출특성을 고려한 홍수의 정확한 예측을 위해 강우분석 및 외수위를 고려하고, 도시유출모형인 SWMM 모형을 이용하여 하수관거의 월류를 분석하였고, 이 결과를 홍수범람해석 모형과 연계하여 도시유역에서의 집중호우 발생시 침수해석을 실시하여 수방시설물의 홍수배제 효율을 분석하였다. SWMM 모형의 적용결과 외수위영향에 따른 원활한 내수배제가 불가능 한 것으로 나타났고, 관거 월류량이 많아진 것으로 나타났다. 월류된 우수가 지면을 따라 흐를 경우 저지대의 침수가 예상되고, 월류량이 많은 맨홀을 주요맨홀로 선정하였고, 월류수 저감을 위한 방안으로 주요 맨홀의 인근 지역에 저류지를 설치하는 방안과 각 맨홀들을 연결하는 관거를 확대하는 방안을 설정하였다. 월류 저감 시나리오 적용 결과 저류지 설치시 월류량의 45%, 관거 확대시 33~64%의 저감효과를 보였다. SWMM 모형의 결과를 이용하여 홍수범람해석 모형을 모의한 결과 지표경사와 도로를 따라 맨홀 월류수가 모여 침수현상을 발생시키는 것으로 나타났으며, 관거 확대 적용시 침수면적이 19.6%, 60.5% 줄어든 것으로 나타났다.

• 한국정보전자통신기술학회논문지
• /
• 제8권4호
• /
• pp.319-326
• /
• 2015

본 논문에서는 3차원 역학 모델을 이용한 폐 결절 분할 방법을 제안한다. 제안된 폐결절 분할 방법은 세 가지 과정으로 구성된다. 첫 번째, 초기 3차원 역학 모델을 생성한다. 생성된 모델은 삼각형 메쉬로 구성되어져 있고 구의 형태를 갖는다. 두 번째, 구성된 초기 모델의 점들을 변화시킨다. 세 번째, 각각의 변화에 따라 외부 에너지와 내부에너지를 계산 한다. 내부 에너지는 형태 기반 에너지로 구성되어 있고, 외부에너지는 음영값 기반 에너지로 구성된다. 이 초기 모델을 변화시키고, 변화에 따른 에너지의 최소값을 찾는 과정을 반복한다. 모델의 에너지가 수렴되면 이를 이용하여 결절을 분할한다. 제안된 방법은 기존 방법에 비하여 정확도가 크게 개선되었다.

• 대한한방내과학회지
• /
• 제32권3호
• /
• pp.425-434
• /
• 2011

Objectives : Hypothyroidism is the most common pathological disease of the endocrine system. Morinda Officinalis Radix has been used in treatment of Yang deficiency. In this study, we investigated the therapeutic effects of Morinda Officinalis Radix on a rat model of hypothyroidism induced by 6-propyl, 2-thiouracil (PTU). Methods : Two-month-old Sprague-Dawley male rats were used with injection of PTU which induced rats into hypo-thyroidism. During 2 weeks, rats were treated with Morinda Officinalis Radix and thyroxine. Body weights were checked every week, the after 4 weeks, biochemical analyses were performed. The levels of T3, T4 and TSH was measured by EILSA. Results : In the Morinda Officinalis Radix group, we could observe the level of T4 significantly increased and TSH level significantly decreased. Conclusions : Morinda Officinalis Radix could help the thyroid to produce thyroid hormones under PTU suppression. There is no harm effect on liver and kidney function, or other metabolism. According to these results it could help to treat hypothyroidism patients and relieve their symptoms.

• 대한한방내과학회지
• /
• 제40권4호
• /
• pp.567-581
• /
• 2019

Objective: This study aimed to evaluate the inhibitory effects of SGX01 on the lung injuries of COPD mice model. Materials and Methods: This study was carried out in two ways: in vitro and in vivo. In vitro, L929 cells were challenged with LPS, and then treated with six concentrations of SGX01 (10, 30, 50, 100, 300, and $500{\mu}g/ml$) and analyzed by ELISA. In vivo, C57BL/6 mice were challenged with LPS and cigarette smoking solution (CSS), and then treated with a vehicle only (control group), dexamethasone 3 mg/kg (dexa group), or a SGX01 200 mg/kg (SGX01 group). After sacrifice, the BALF or lung tissue was analyzed with Cytospin, FACS, ELISA, real-time PCR and H&E, and Masson's trichrome staining. Results: SGX01 significantly decreased NO, $TNF-{\alpha}$, and IL-6 on L929 cells challenged with LPS. In the COPD model, SGX01 significantly inhibited the increase of neutrophils, $TNF-{\alpha}$, IL-17A, CXCL-1, MIP2, CD8+ cells in BALF, and $TNF-{\alpha}$, $IL-1{\beta}$ mRNA expression in lung tissue. It also decreased the severity of the histological lung injury. Conclusion: This study suggests the usability of SGX01 for COPD patients by controlling lung tissue injury.

• 소성∙가공
• /
• 제13권2호
• /
• pp.160-167
• /
• 2004

In order to theoretically analyze the creep behavior of high Cr steel at $600^{\circ}C$, a unified elasto-viscoplastic constitutive model based on the consideration of dislocation density is proposed. A combination of a kinetic equation describing the mechanical response of a material at a given microstructure in terms of dislocation glide and evolution equations for internal variables characterizing the microstructure provides the constitutive equations of the model. Microstructural features of the material such as the grain size and spacing between second phase particles are directly implemented in the constitutive equations. The internal variables are associated with the total dislocation density in a simple model. The model has a modular structure and can be adjusted to describe a creep behavior using the material parameters obtained from uniaxial tensile tests.

• 로봇학회논문지
• /
• 제19권1호
• /
• pp.8-15
• /
• 2024

This paper proposes a linear model predictive control of 6-DOF remotely operated underwater vehicles using nonlinear robust internal-loop compensator (NRIC). First, we design a integrator embedded linear model prediction controller for a linear nominal model, and then let the real model follow the values calculated through forward dynamics. This work is carried out through an NRIC and in this process, modeling errors and external disturbance are compensated. This concept is similar to disturbance observer-based control, but it has the difference that H_∞ optimality is guaranteed. Finally, tracking results at trajectory containing the velocity discontinuity point and the position tracking performance in the disturbance environment is confirmed through the comparative study with a traditional inverse dynamics PD controller.

• 한국임상수의학회:학술대회논문집
• /
• 한국임상수의학회 2007년도 추계국제학술대회 및 컨퍼런스
• /
• pp.581-581
• /
• 2007

• The Journal of Asian Finance, Economics and Business
• /
• 제8권7호
• /
• pp.457-468
• /
• 2021

This study seeks to examine the effects of fraud management accounting on organizational value creation of listed firms in Thailand through internal audit function and internal audit effectiveness as the mediators of the study. In addition, governance culture and digital capability are hypothesized to affect fraud management accounting, internal audit function, and internal audit effectiveness. The 297 listed firms in Thailand are the samples of the study. The structural equation model is applied to test the research relationships. The results of the study indicate that, firstly, fraud management accounting has an effect on internal audit function, internal audit effectiveness, and organizational value creation. Secondly, internal audit function affects both internal audit effectiveness and organizational value creation. It also mediates the fraud management accounting-organizational value creation relationships. Thirdly, internal audit effectiveness affects organizational value creation and it mediates the fraud management accounting-organizational value creation relationships. Finally, governance culture affects fraud management accounting, internal audit function and internal audit effectiveness. Accordingly, executives can support, promote and enhance the applications of fraud management accounting in an organization, and utilize its concepts as the valuable tools in order to create best organizational practices and achieve their business goals in the current and future operations.

• 대한치과보철학회지
• /
• 제34권2호
• /
• pp.385-402
• /
• 1996

The purpose of this study was to analyze how the stability of the implant prostheses and the loosening of the fastening screw was affected when the various types of Hex structure provided for the effect of anti-rotation of the single prostheses were given. Three dimensional finite element model was designed with which the implants with the external hex type of 0.75mm, 1.5mm and the implant with the internal hex type of 0.75mm, 1.5mm and the implant with the external hex type of $15^{\circ}$ tapered shape of 0.75mm were supposed to completely osseointegrate to the mandible. After fininshing the finite element model, the preload of 10N at the fastening screw was applied and then the vertical and $30^{\circ}$ lateral load of 200N was applied respectively at the cusp tips of the prostheses. The following results were obtained : 1. In case of displacement, the amount of displacement was increased at the internal hex type(model C, D) than at the external hex type(model A, B, E) when the vertical and lateral load was applied. 2. Less equivalent stress was represented at the model B with increased external hex height than at the model A when the vertical and lateral load was applied. 3. Much stress was represented at the model E with increased hex angle than at the model A in case of the stress happened to the implant body and the fastening screw when the vertical and lateral load was applied. 4. Much equivalent stress was represented at the model D with deepened internal hex height than at the model C when vertical and lateral load was applied. 5. The least stress was taken at the model B and the most stress was taken at the model D in case of the stress happened to the implant when the vertical and lateral load was applied. 6. The least stress was taken at the model C at the vertical load. And the least stress was taken at the model B at lateral load in case of the stress happened to the fastening screw. As a results of this study, the good lateral stability of prostheses and less stress of the component of implant was taken when the external hex height was increased, and the risk of neck fracture of implant and fastening screw was increased when the internal hex height was deepned because of long screw neck portion and thin implant neck portion.

• 대한치과기공학회지
• /
• 제41권4호
• /
• pp.263-269
• /
• 2019

Purpose: The purpose of this study was to evaluate the internal fitness of prostheses fabricated with non-contact extra-oral scanner and those fabricated with intra-oral video scanner, with a comparative accuracy analyses of their precision and trueness. Methods: A polymethyl methacrylate (PMMA) model was fabricated by replicating a master model. The prostheses in the first group were fabricated based on the PMMA model with an intra-oral video scanner (IVS group). Following the fabrication of work models with Type IV Stone that were based on the PMMA model, the prostheses in the second group were fabricated with a non-contact extra-oral scanner (ENB group). The precision and trueness of the prostheses were calculated from comparisons of the three-dimensional images of the internal surfaces of the prostheses and those of the master model. Kruskal-Wallis tests were used to determine the statistical significance, with the level of type 1 error set at 0.05. Results: Trueness (P < 0.009) and precision (P < 0.001) did not differ significantly between the ENB and IVS groups. The IVS group exhibited lower trueness values and larger precision values than the ENB group. Conclusion: Although no significant differences were found in the internal fitness of the prostheses that were fabricated by the two different scanners, the intraoral video scanner-fabricated prostheses had better trueness, whereas the non-contact extra-oral scanner-fabricated prostheses had better precision.