• 천문학회지
• /
• 제31권2호
• /
• pp.161-171
• /
• 1998

We have mapped about 1.5 square degree regions of Lynds 1299, a well isolated dark cloud in the Outer Galaxy (l = $122^{\circ}$, b = $-7^{\circ}$), in the J = 1- 0 transition of $^{12}CO$ and $^{13}CO$ with the 13.7 m radio telescope at Taeduk Radio Astronomy Observatory (TRAO). We found that there are two velocity components in the molecular emission, at $V_{LSR} = -52 km S^{-1}$ (Cloud A) and -8.8 km $s^{-1}$ (Cloud B), respectively. We have derived physical parameters of two molecular clouds and discussed three different mass estimate techniques. We found that there are large discrepancies between the virial and LTE mass estimates for both clouds. The large virial mass estimate reflects the fact that both are not gravitationally bound. We adopt the mass of $5.6 {\times}10^3 \;M{\bigodot}$ for Cloud A and $1.2{\times}10^3 \;M{\bigodot}$) for Cloud B using conversion factor. Cloud A is found to be associated with a localized star forming site, and its morphology is well matching with that of far-infrared (FIR) dust emission. It shows a clear ring structure with an obvious velocity gradient. We suggest that it may be a remnant cloud from a past episode of massive star formation. Cloud B is found to be unrelated to Cloud A (d = 800 pc) and has no specific velocity structure. The average dust color temperature of the uncontaminated portion of Cloud A is estimated to be 24$\~$27.4 K. The low dust temperature may imply that there is no additional internal heating source within the cloud. The heating of the cloud is probably dominated by the interstellar radiation field except the region directly associated with the new-born B5 star. Overall, the dust properties of Cloud A are similar to those of normal dark cloud even though it does have star forming activity.

• Safety and Health at Work
• /
• 제4권2호
• /
• pp.111-116
• /
• 2013

Background: The aim of this study was to evaluate the quality of the Second Korean Working Conditions Survey (KWCS), focusing on its validity and reliability. Methods: The external validity was evaluated by the assessment of sampling procedures and the response rate, in order to investigate the representativeness of the sample. The content validity was evaluated by the assessment of the development of the questionnaire, and the consistency of questions for the selected construct. The test-retest method was used to evaluate the reliability by means of a phone call survey of 30% of the respondents, who were randomly selected. The respondents' satisfaction regarding the survey procedures and interview time were analyzed to evaluate the quality of survey data. Results: The external validity was assured by an acceptable sampling procedure, rigid multi-stage stratified cluster random sampling. The content validity was also guaranteed by a reasonable procedure for the development of the questionnaire with a pretest. The internal consistency of the questions for work autonomy was maintained, with 0.738 of Cronbach's alpha. The response rate of 36% was lower than that of the European Working Conditions Survey (EWCS), with a contact rate of 66%, compared to 76% for the EWCS. The matching rates of the five retested questions were more than 98% reliable. Conclusion: The quality of the second KWCS was assured by the high external and content validity and reliability. The rigid sampling procedure and development of the questionnaire contributed to quality assurance. The high level of reliability may be guaranteed by the sophisticated field survey procedures and the development of a technical manual for interviewers. The technical strategies for a high response rate should be developed for future surveys.

• Asian Journal of Atmospheric Environment
• /
• 제2권1호
• /
• pp.34-46
• /
• 2008

Emissions inputs for use in air quality modeling of Korea were generated with the emissions inventory data from the National Institute of Environmental Research (NIER), maintained under the Clean Air Policy Support System (CAPSS) database. Source Classification Codes (SCC) in the Korea emissions inventory were adapted to use with the U.S. EPA's Sparse Matrix Operator Kernel Emissions (SMOKE) by finding the best-matching SMOKE default SCCs for the chemical speciation and temporal allocation. A set of 19 surrogate spatial allocation factors for South Korea were developed utilizing the Multi-scale Integrated Modeling System (MIMS) Spatial Allocator and Korean GIS databases. The mobile and area source emissions data, after temporal allocation, show typical sinusoidal diurnal variations with high peaks during daytime, while point source emissions show weak diurnal variations. The model-ready emissions are speciated for the carbon bond version 4 (CB-4) chemical mechanism. Volatile organic carbon (VOC) emissions from painting related industries in area source category significantly contribute to TOL (Toluene) and XYL (Xylene) emissions. ETH (Ethylene) emissions are largely contributed from point industrial incineration facilities and various mobile sources. On the other hand, a large portion of OLE (Olefin) emissions are speciated from mobile sources in addition to those contributed by the polypropylene industry in point source. It was found that FORM (Formaldehyde) is mostly emitted from petroleum industry and heavy duty diesel vehicles. Chemical speciation of PM2.5 emissions shows that PEC (primary fine elemental carbon) and POA (primary fine organic aerosol) are the most abundant species from diesel and gasoline vehicles. To reduce uncertainties in processing the Korea emission inventory due to the mapping of Korean SCCs to those of U.S., it would be practical to develop and use domestic source profiles for the top 10 SCCs for area and point sources and top 5 SCCs for on-road mobile sources when VOC emissions from the sources are more than 90% of the total.

• 한국전자파학회논문지
• /
• 제27권2호
• /
• pp.220-223
• /
• 2016

본 논문에서는 캐스코드(cascode) 구조에 트랜지스터를 추가하여 잡음 특성을 유지하면서 높은 선형성을 갖는 저잡음 증폭기 구조를 제안하고 설계하였다. 제안한 구조는 트랜지스터의 사이즈 최적화를 통해 잡음원을 최소화 했으며, 전류원분리(current bleeding) 효과를 주어 선형성을 개선하였다. 저잡음 특성에 유리한 $0.5{\mu}m$ pHEMT 공정을 이용해 제작된 저잡음 증폭기는 1.8~2.6 GHz의 동작 대역에서 30.8 dBm의 $OIP_3$, 15.0 dB의 이득, 1.1 dB의 NF, 11.6 dB/10.4 dB의 입출력 반사 손실 특성을 보였다.

• 한국전자파학회논문지
• /
• 제23권11호
• /
• pp.1239-1247
• /
• 2012

본 논문에서는 GaN HEMT 소자를 이용한 X-대역 반도체 전력 증폭 장치(SSPA)의 설계 및 제작에 대하여 논의한다. 반도체 전력 증폭 장치는 안정적인 전원을 공급해 주는 전원공급기, 통신과 내부 모듈을 제어하기 위한 제어부, RF 신호를 증폭하기 위한 RF부로 구성된다. 특히, RF부를 구성하는 능동 소자로 TriQuint사의 GaN HEMT Bare 소자를 이용하였다. RF부는 초단, 드라이브 단, 메인 출력 단으로 구성되어 있으며, 각 앰프는 입 출력 정합을 통하여 구현하였다. 제작된 반도체 전력 증폭 장치는 X-대역(500 MHz 대역폭)에서 duty 26 %, 최장 펄스 100 us 조건에서 300 W 이상의 출력을 얻을 수 있었으며, 향후 선박용 레이더 시스템에 적용할 예정이다.

• 한국통신학회논문지
• /
• 제31권2B호
• /
• pp.71-79
• /
• 2006

인터넷 트래픽의 급속한 성장으로 인하여, 인터넷 라우터에서는 보다 빠른 주소 검색을 지원하면서도 매우 큰 라우팅 데이터에 대하여도 잘 동작하는 인터넷 주소 검색 구조를 요구하고 있다. 본 논문에서는 이진 검색에 기초한 인터넷 주소 검색 구조를 심도있게 연구하였다. 기존에 연구되어온 대부분의 이진 검색 구조들은 프리픽스의 값에 따르는 이진 검색을 수행하는 구조로서 프리픽스 개수의 로그 함수에 비례하는 검색 속도를 보인다. 한편 프리픽스 길이에 따르는 이진 검색 구조가 연구되어 검색 성능에 있어서는 매우 우수한 성질을 보이나, 순수한 의미의 이진 검색이 불가능하여, 이진 검색시 접근되는 노드에 특수 목적의 마커를 저장하고, 또한 가장 잘 일치하는 프리픽스를 미리 계산하여 저장하는 방식을 통하여 해결하였다. 이러한 복잡한 선계산은 라우팅 테이블의 구성을 매우 어렵게 할 뿐 아니라, 프리픽스의 부가적 추가를 불가능하게 만드는 단점이 있다. 본 논문에서는 이러한 복잡한 선계산 없이 리프-푸슁만을 통하여 프리픽스 길이에 대하여 이진 검색을 수행하는 매우 효율적인 구조를 제안하고, 제안하는 구조의 성능을 실험한 후, 기존에 연구되어온 다른 이진 검색 구조와 성능을 비교하였다.

• 한국전자파학회논문지
• /
• 제21권7호
• /
• pp.778-785
• /
• 2010

본 논문에서는 소형 무선기기에 응용하기 위하여 비대칭 접지면을 갖는 CPW 급전 모노폴 안테나를 제안하였다. CPW 급전 방식을 이용하여 대역폭을 개선시켰으며, 좌우의 비대칭적인 접지면으로 각각의 공진 소자에 상이한 캐패시턴스를 발생시켜 동작 대역폭은 유지하면서 임피던스 매칭을 유도하였다. 측정 결과, VSWR< 2.5:1 기준으로 대역폭은 $824{\sim}890$ MHz와 $1,500{\sim}2,170$ MHz였으며, 방사 패턴은 전방향 특성을 갖는 것을 확인하였다. 안테나 최대 이득은 850, 1,575, 1,790, 1,930, 2,050 MHz 대역에서 각각 5.52, 0.64, 3.00, 0.94, 1.85 dBi로 측정 되었다. 제안한 안테나는 휴대 통신기기의 내장형 안테나에 응용하기 적합하게 구현되었다.

• Journal of Korean Neurosurgical Society
• /
• 제62권2호
• /
• pp.217-224
• /
• 2019

Objective : We attempted to discover that Ankylosing spondylitis (AS) has a comprehensive relationship with congestive heart failure and death. Methods : We used a nationwide database managed by the Korean National Health Insurance Service from 2010 to 2014. Twelve thousand nine hundred eighty-eight patients with a diagnosis of AS and 64940 age- and sex- stratified matching subjects without AS were enrolled in the AS and control groups. Incidence probabilities of 6 years congestive heart failure and death in each group were calculated. The Cox proportional hazard regression analysis was used to estimate the hazard ratio. We divided the AS and control groups into subgroups according to sex, age, income, and comorbidities. Results : During the follow-up period, 102 patients (0.79%) in the AS group and 201 patients (0.32%) in the control group developed congestive heart failure (p<0.0001). In addition, 211 (1.62%) subjects in the AS group died during the follow-up period compared to 639 (0.98%) subjects in the control group (p<0.0001). The adjusted hazard ratio of congestive heart failure and death in the AS group was 2.28 (95% confidence interval [CI], 1.80-2.89) and 1.66 (95% CI, 1.42-1.95), respectively. The hazard ratios of congestive heart failure and death were significantly increased in all of the subgroups. Conclusion : The incidence rates of congestive heart failure and death were increased in AS patients.

• Archives of Plastic Surgery
• /
• 제46권2호
• /
• pp.140-146
• /
• 2019

Background Thoracodorsal vessels (TDVs) and internal mammary vessels (IMVs) have both been widely employed as recipient vessels for use in free muscle-sparing transverse rectus abdominis myocutaneous (MS-TRAM) flaps. However, whether TDVs or IMVs are preferable as recipient vessels for autologous breast reconstruction with a free MS-TRAM flap remains controversial. The purpose of this study was to compare the clinical outcomes when TDVs were used as recipient vessels to those obtained when IMVs were used as recipient vessels for autologous breast reconstruction with a free MS-TRAM flap. Methods A retrospective matched-cohort study was performed. We retrospectively reviewed data collected from patients who underwent a free MS-TRAM flap for autologous breast reconstructions after mastectomy between March 2003 and June 2013. After a one-to-one matching using age, 100 autologous breast reconstructions were selected in this study. Of the 100 breast reconstructions, 50 flaps were anastomosed to TDVs and 50 to IMVs. Patient demographics and clinical outcomes including operation time, length of hospital stay, postoperative complications, and aesthetic score were compared between the two groups. Results No statistically significant differences were found between the two groups in patient demographics and clinical outcomes, including the complication rates and aesthetic scores. There were no major complications such as total or partial flap loss in either group. Conclusions The results of our study demonstrate that both TDVs and IMVs were safe and efficient as recipient vessels in terms of the complication rates and aesthetic outcomes.

• 대한통합의학회지
• /
• 제9권1호
• /
• pp.1-11
• /
• 2021

Purpose : The purpose of this study was to investigate the effect of single limb stance exercise according to the support surface on dynamic balance ability and abdominal muscle thickness. Methods : We recruited 28 healthy subjects in this study. Subjects were assigned to 2 groups by matching method. The control group was 5 males and 9 females, and single limb stance exercise was performed on the stable support surface. The experimental group consisted of 6 males and 8 females, and trained to stand on the unstable support. During the single limb stance exercise, the dominant foot was set as the foot that appeared numerically through the exercise of the dynamic balance meter (Biorescue). Single limb stance exercise along the supporting surface was maintained for 15 seconds and then rested for 15 seconds. It was repeated 5 times. Particularly, the balance exercise on the unstable support surface was sufficiently practiced. Independent t test was performed for comparison between groups. Paired t test was performed to compare before and after each group. Results : There was no difference between the control group and the experimental group in the comparison of dynamic balance ability (p>.05). However, there were significant differences before and after exercise in both the control and experimental groups (p<.05). Similarly, in the comparison of abdominal muscle thickness, there was a significant difference within each group, especially internal oblique and transverse abdominis (p<.05), and no difference between groups (p>.05). Conclusion : Based on these results, although there was no difference between the groups, in the experimental group, numerical increase in dynamic balance ability and abdominal muscle thickness was confirmed. Therefore, single limb stance exercise on the unstable support surfaces activates core muscles and has a positive effect on dynamic balancing ability.