• 한국해안·해양공학회논문집
• /
• 제29권6호
• /
• pp.382-388
• /
• 2017

본 연구에서는 OpenFOAM 기반의 부유식 연직판의 파랑 저감 성능 평가 수치해석 모델링을 수행하였다. Waves2FOAM 라이브러리를 기반으로 내부조파에 의한 파랑 생성 및 스폰지층에 의한 소파 기능을 추가로 적용하였다. 이렇게 추가된 조파 및 소파 기능을 먼저 간단한 2차원 해석으로 검증한 후, Briggs et al.(2001)의 규칙파 실험자료 2가지에 대한 수치모델링을 수행하였다. 모델링 결과는 실험자료와 대체로 잘 일치하였으며, Briggs et al.(2001)에 수록된 WAMIT 수치해석 결과보다 더 좋은 결과를 나타내었다.

• 비파괴검사학회지
• /
• 제32권6호
• /
• pp.696-702
• /
• 2012

In this study, a noncontact laser ultrasonic system is proposed for rail defect detection. An Nd-Yag pulse laser is used for generation of ultrasonic waves, and the corresponding ultrasonic responses are measured by a laser Doppler vibrometer. For the detection of rail surface damages, the shape of the excitation laser beam is transformed into a line. On the other hand, a point source laser beam is used for the inspection of defects inside a rail head. Then, the interactions of propagating ultrasonic waves with defects are examined using actual rail specimens. Amplitude attenuation was mainly observed for a surface crack, and reflections were most noticeable from an internal damage. Finally, opportunities and challenges associated with real-time rail inspection from a high-speed train are discussed.

• 소음진동
• /
• 제6권6호
• /
• pp.709-715
• /
• 1996

In recent years, the piping vibration in many Power Plants is being increased by the aged generating facilities due to a long time use. Generally, the pressure fluctuations associated with the flow-induced excitations in this case are broadband in nature. Mainly, the dominant sources of vibration are a vortex-shedding, plane waves and boundary layer turbulence. The peak level of the spectrum is proportional to the dynamic head. A severe disturbance in pipeline results in the generation of intense broadband internal sound waves which can propagate through the piping system. The characteristic frequencies of operating loads of 20%, 57%, 70%, 100% are 4 - 6 Hz and coincide with the results from impact hammering test and FEM analysis. We chose the wire energy absorbing rope restraint as a vibration reduction method after reviewing the various conditions such as site, installing space and economic cost etc. After installation, the vibration level was reduced about 54% in velocity.

• 한국수자원학회논문집
• /
• 제45권6호
• /
• pp.545-555
• /
• 2012

컴퓨터 기술의 발달과 더불어 수치해석을 이용한 파랑변형에 대한 연구는 꾸준히 발전하고 있으며 점점 중요한 역할을 수행하고 있다. 하지만 수치모형을 이용한 연구에는 다양한 문제점이 발생할 우려가 있는데, 그 중 가장 빈번하게 발생하는 문제 중의 하나가 파랑의 조파지점에서 발생하는 수치수조내로의 재반사 문제이다. 재반사를 막기 위한 방법으로는 내부조파 기법을 이용하는 것이 일반적이다. Navier-Stokes 방정식 모형에서는 질량 원천항을 이용한 내부조파 기법을 주로 사용해 왔으나, 기존의 연구는 대부분 연직 2차원 수치모형을 이용한 연구에 국한되어 있었다. 그러나 3차원 수치모형을 이용한 연구가 점차 활발해지면서 3차원 Navier-Stokes 방정식 모형의 내부조파 기법에 대한 필요성이 증대되고 있다. 최근 RANS(Reynolds averaged Navier-Stokes) 방정식 모형에서 Boussinesq 방정식의 운동량 원천항을 활용하여 파랑을 내부조파하는 기법이 발표되어 3차원 공간에서 경사지게 입사하는 파랑을 성공적으로 재현하였다. 본 연구에서는 LES(large eddy simulation) 기반의 3차원 Navier-Stokes 방정식 수치모형에 운동량 원천항을 이용한 내부조파 기법을 적용하여 목표파랑을 조파하고 해석해와 비교하여 이를 검증하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1863-1868
• /
• 2003

Decades of studies of geophysical flow have unveiled that the flow downstream of obstacles in stratified flow consists of attached wake and strong internal waves, or separated, fluctuating wake and persistent late wakes. Among unique and interesting characteristics of the stratified flow past obstacles is the generation of coherent vortex the late wake far downstream of the object. Unlike in homogeneous fluid, the flow field downstream self-develops coherent vortex even after diminishing of the near wake, no matter how small the stratification is. This paper present a computational approach to simulate the generation of the coherent vortex structure in late wake of a moving sphere submerged in weakly stratified fluid. The results are in consistent with several experimental observations and the vortex stretching mechanism is employed to explain the process of coherence.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.237.1-237.1
• /
• 2010

Recent developments such as concern over global warming, depletion of fossil fuels and increase in energy demands by the increasing world population has eventually lead to mass production of electricity using renewable sources. Ocean contains energy in form of thermal energy and mechanical energy: thermal energy from solar radiation and mechanical energy from the waves and tides. The current paper looks at generating power using waves. The primary objective of the present study is to maximize the primary energy conversion (first stage conversion) of the base model by making some design changes. The model entire consisted of a numerical wave tank and the turbine section. The turbine section had three components; front guide nozzle, augmentation channel and the rear chamber. The augmentation channel further consisted of a front nozzle, rear nozzle and an internal fluid region representing the turbine housing. Different front guide nozzle configuration and rear chamber design were studied. As mentioned, a numerical wave tank was utilized to generate waves of desired properties and later the turbine section was integrated. The waves in the numerical wave tank were generated by a piston type wave maker which was located at the wave tank inlet. The inlet which was modeled as a plate wall which moved sinusoidally with the general function, $x=asin{\omega}t$. In addition to primary energy conversion, observation of flow characteristics, pressure and the velocity in the augmentation channel, rear chamber as well as the front guide nozzle are presented in the paper. The analysis was performed using the commercial code of the ANSYS-CFX. The base model recorded water power of 29.9 W. After making the changes, the best model obtained water power of 37.1 W which represents an increase of approximately 24% in water power and primary energy conversion.

• 한국건축시공학회지
• /
• 제24권1호
• /
• pp.67-75
• /
• 2024

한국은 주택 난방 방식으로 대부분 온돌 파이프라인을 이용한 방법을 채택하고 있으나 콘크리트 속에 매설되어 있는 특성으로 인해 설치 후 배관 내부의 지속적인 관리를 하기가 쉽지 않다. 온돌 배관은 장기간 사용을 하면 슬러지나 부식 산화물, 미생물 등이 배관 내벽에 퇴적되면서 난방의 효율이 나빠져서 심한 경우에는 열화에 의한 부식, 스케일 등의 문제를 일으키기도 한다. 따라서 본 연구는 온돌 파이프라인의 유지관리를 위하여 초음파 발생 방식을 제안하고 그 가능성을 실험으로 확인하는데 그 목적이 있다. 본 연구를 위한 초음파 발생 장치는 3가지로 제시되며, 표면 진동형, 외부 발생형, 내부 발생형이 그것이다. 관내 오염물은 분말형 가루, 슬러지형 가루, 액상 물질로 선정하였다. 초음파 발생 이후 시간에 따른 세척 효과를 확인하였으며, 세척 결과는 이미지 분석 방법을 통해 산출하였다. 실험 결과, 배관 외부에서 발생시킨 초음파가 효과적임을 알 수 있었으나 배관 내부에서 발생시킨 초음파 역시 유사한 세척 결과를 얻었다. 온돌 배관의 특성 상 외부 발생이 불가능하므로 내부의 발생을 통한 세척 효과가 있을 것으로 기대된다. 향후 배관 내부 발생 장치의 개발을 통해 온돌 파이프라인의 유지관리를 위한 새로운 방식의 제시가 가능할 것으로 기대된다.

• Journal of Multimedia Information System
• /
• 제9권1호
• /
• pp.11-20
• /
• 2022

In this paper, we have recently created self-driving cars and self-parking systems in human-friendly cars that can provide high safety and high convenience functions by recognizing the internal and external situations of automobiles in real time by incorporating next-generation electronics, information communication, and function control technologies. And with the development of connected cars, the ITS (Intelligent Transportation Systems) market is expected to grow rapidly. Intelligent Transportation System (ITS) is an intelligent transportation system that incorporates technologies such as electronics, information, communication, and control into the transportation system, and aims to implement a next-generation transportation system suitable for the information society. By combining the technologies of connected cars and Internet of Things with software features and operating systems, future cars will serve as a service platform to connect the surrounding infrastructure on their own. This study creates a research methodology based on the Enhanced Security Model in Self-Driving Cars model. As for the types of attacks, Availability Attack, Man in the Middle Attack, Imperial Password Use, and Use Inclusive Access Control attack defense methodology are used. Along with the commercialization of 5G, various service models using advanced technologies such as autonomous vehicles, traffic information sharing systems using IoT, and AI-based mobility services are also appearing, and the growth of smart transportation is accelerating. Therefore, research was conducted to defend against hacking based on vulnerabilities of smart cars based on artificial intelligence blockchain.

• 소음진동
• /
• 제8권2호
• /
• pp.239-250
• /
• 1998

Traditionally, intake noise from internal combustion engine has not recevied much attention compared to exhaust noise. But nowadays, intake noise is a major contributing factor to automotive passenger compartment noise levels. The main objective of this paper is to identify the mechanism of generation, propagation and radiation of the intake noise. With a simplest geometric model, one of the main noise sources for the intake stroke is found to be the pressure surge, which is generated after intake valve closing. The pressure surge, which has the nonlinear acoustic behavior, propagates and radiates with relatively large amplitude. In this paper, unsteady compressible Navier-Stokes equations are employed for the intake stroke of axisymmetric model having a single moving cylinder and a single moving intake valve. To simulate the periodic motion of the piston and the valve, unsteady deforming mesh algorithm is employed and Thompson's non-reflecting boundary condition is applied to the radiation field. In order to resolve the small amplitude waves at the radiation field, essentially non-oscillatory(ENO) schemes with an artificial compression method (ACM) are used.

• Tribology and Lubricants
• /
• 제26권6호
• /
• pp.336-340
• /
• 2010

Ultrasound thermography detects defects by radiating 20 ~ 30 kHz ultrasound waves to the samples and capturing the heat generated from the defects with the use of an infrared thermographic camera. This technology is being spotlighted as a next-generation NDE for the automobile and aerospace industries because it can test large areas and can detect defects such as cracks and exfoliations in real time. The heating mechanism of the ultrasound vibration has not been accurately determined, but the thermomechanical coupling effect and the surface or internal friction are estimated to be the main causes. When this heat is captured by an infrared thermographic camera, the defects inside or on the surface of objects can be quickly detected. Although this technology can construct a testing device relatively simply and can detect defects within a short time, there are no reliable data about the factors related to its detection ability. In this study, the ultrasound thermography technique was used to manufacture gasoline and diesel engine piston specimens, and nondestructive reliability tests to verify the applicability and validity of the ultrasound thermography technique.