• Tuberculosis and Respiratory Diseases
• /
• v.38 no.3
• /
• pp.309-316
• /
• 1991

Malignant fibrous histiocytoma (MFH) is the most common soft tissue sarcoma of late adult life. This tumor occurs principally as a mass on an extremity or in the abdominal cavity or retroperitoneum of adult but primary pulmonary MFH is rare. MFH may be subclassified into storiform-pleomorphic, myxoid, giant cell, inflammatory, and angiomatoid type and the prognosis is no different among the histologic subtypes. We experienced one patient who was consistent with primary MFH of the lung. The patient complained dyspnea and intermittent hemoptysis and showed bilateral suprahilar mass on simple chest film and chest CT. Histological findings by open lung biopsy was storiform-pleomorphic type and individual cells showed histiocyte-like and fibroblast-like appearance.

• Restorative Dentistry and Endodontics
• /
• v.41 no.1
• /
• pp.37-43
• /
• 2016

Objectives: The purpose of this study was to compare the marginal and internal fit of nano-composite CAD-CAM restorations. Materials and Methods: A full veneer crown and an mesio-occluso-distal (MOD) inlay cavity, which were prepared on extracted human molars, were used as templates of epoxy resin replicas. The prepared teeth were scanned and CAD-CAM restorations were milled using Lava Ultimate (LU) and experimental nano-composite CAD/CAM blocks (EB) under the same milling parameters. To assess the marginal and internal fit, the restorations were cemented to replicas and were embedded in an acrylic mold for sectioning at 0.5 mm intervals. The measured gap data were pooled according to the block types and measuring points for statistical analysis. Results: Both the block type and measuring point significantly affected gap values, and their interaction was significant (p = 0.000). In crowns and inlays made from the two blocks, gap values were significantly larger in the occlusal area than in the axial area, while gap values in the marginal area were smallest (p < 0.001). Among the blocks, the restorations milled from EB had a significantly larger gap at all measuring points than those milled from LU (p = 0.000). Conclusions: The marginal and internal gaps of the two nano-composite CAD/CAM blocks differed according to the measuring points. Among the internal area of the two nano-composite CAD/CAM restorations, occlusal gap data were significantly larger than axial gap data. The EB crowns and inlays had significantly larger gaps than LU restorations.

• Restorative Dentistry and Endodontics
• /
• v.37 no.1
• /
• pp.41-49
• /
• 2012

Objectives: The internal adaptation of composite restorations with or without resin modified glass ionomer cement (RMGIC) was analyzed non-destructively using Microcomputed tomography (micro-CT). Materials and Methods: Thirty intact human teeth were used. The specimens were divided into 3 groups. In the control group, the cavities were etched with 10% phosphoric acid for 15 sec. Composite resin was filled into the cavity without adhesive. In group 1, light cured glass ionomer cement (GIC, Fuji II LC, GC) was applied as a base. The cavities were then etched, bonded, light cured and filled with composites. In group 2, the cavities were then etched, bonded, light cured and filled with composites without base application. They were immersed in a 25% silver nitrate solution. Micro-CT was performed before and after mechanical loading. One-way ANOVA with Duncan analysis was used to compare the internal adaptation between the groups before or after loading. A paired t-test was used to compare internal adaptation before and after mechanical loading. All statistical inferences were made within the 95% confidence interval. Results: The silver nitrate solution successfully penetrated into the dentinal tubules from the pulp spaces, and infiltrated into the gap between restoration and pulpal floor. Group 2 showed a lower adaptation than the control group and group 1 (p < 0.05). There was no significant difference between the control group and group 1. For all groups, there was a significant difference between before and after mechanical loading (p < 0.05). Conclusions: The internal adaptation before and after loading was better when composites were bonded to tooth using adhesive than composites based with RMGIC.

• Tuberculosis and Respiratory Diseases
• /
• v.48 no.1
• /
• pp.84-90
• /
• 2000

The appearance of a tumor in the chest wall is rare compared to that in any other part of the body. It can be classified into benign and malignant types and can be located in the rib, clavicle, sternum, cartilage and soft tissues. Tumors that are metastatic are commonly located in the lung, breast, bone and pleura. But, the soft tissue mass of anterior chest wall is rarely metastasized from a distant organ that is not confined to the thoracic cavity. This and thus has rarely been described. A 68-year-old man was admitted to our hospital with a chief complaint of resting dyspnea. A huge non-tender mass of about $10{\times}15$ cm in size was visible on his left lower anterior chest wall. We pathologically confirmed that the mass was a metastatic renal cell carcinoma of clear cell type by incision biopsy. Through an incision biopsy, the mass was pathologically confirmed as a metastatic renal cell carcinoma of the clear cell type.

• Journal of Veterinary Clinics
• /
• v.24 no.2
• /
• pp.251-254
• /
• 2007

A 10-year-old intact female Yorkshire terrier dog was referred for evaluation of marked abdominal distension and hemorrhagic effusion. Abdominal radiography and ultrasonography demonstrated abdominal effusion and intraabdominal mass with anechoic cystic components. On ascites cytology, neoplastic epithelial cells with vacuolated cytoplasm and prominent nucleoli were identified. Magnetic resonance imaging (MRI) showed the well-defined, heterogeneous, and large mass filled the intraabdominal cavity. At necropsy, a large mass arising from the right ovary was observed. Histopathologically, the mass was composed of papillary structures lined by neoplastic epithelial cells. The dog was definitively diagnosed as malignant ovarian adenocarcinoma with papillary pattern based on clinical and histopathological findings.

• Journal of Veterinary Clinics
• /
• v.27 no.2
• /
• pp.186-189
• /
• 2010

A 14-year-old neutered female Chihuahua was presented because of seizure episodes and circling to the left side. Based on neurological examination, the lesion was localized on left forebrain. The mass in the left nasal cavity and breaching of the nasal septum were seen magnetic resonance images. And there was a presence of contrast enhanced mass involving the rostral left brain. Based on diagnostic image analysis, this lesion strongly suggested secondary brain tumor infiltrated by nasal cavity. The patient's symptoms were well controlled by a combination therapy of prednisolone and lomustine (CCNU), and survived for two months after diagnosis. This case was definitively diagnosed as a nasal neuroendocrine carcinoma based on histopathological findings. This report describes the clinical findings, imaging characteristics, and pathologic features of secondary brain tumor which caused by infiltration of nasal neuroendocrine carcinoma in a dog.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.235-239
• /
• 2004

Sound transmission either as airborne or structure borne is a potential problem that occurs in buildings either from sources within or from outside. With the expansion of real estate activities in countries like India, the need to attend sound insulation requirements also assumes greater dimensions. The focus of this research is on studying the sound transmission characteristics of building structures made of hollow blocks, neocrete block, aerocon block and prefabricated panels such as Ferrocement panel. The tests were carried out the blocks with and without plastering and their sound reduction index was measured at one-third octave frequencies. In the case of ferrocement panels, different types of systems were tested in the TL suite. Panels with cavity, with cavity ties, with insulation, with stiffeners and with plasterboard were investigated. Sound reduction index of these panels was measured with additional quantities like longitudinal wavespeed, and loss factors (internal and total loss factor). Tests were also conducted on Cypcrete wall panel and Sandwiched wooden panel in a similar way. Theoretical investigations were carried out using Statistical Energy Analysis (SEA) for the above systems. Sound reduction index was then compared between the predicted and the measured values.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.5
• /
• pp.633-637
• /
• 2001

The authors report a case of syringo-pleural shunt for recurrent distal obstruction of syringosubarachnoid shunt in a 23-year-old woman. She complained of tingling sensation and dysesthesia on the left upper extremity. Neuroradiologic imaging studies revealed syringomyelia in the left lateral side of the cord from medulla to 7th thoracic cord level. We identified intraoperatively high internal pressure of the syrinx cavity due to distal shunt tube obstruction. Syringo-pleural shunt was performed and cavity size was markedly decreased at later follow up MRI. In conclusion, the posttraumatic syrinx, especially in cases with previous syringosubarachnoid shunt or diffuse subarachnoid scarring, can be successfully managed with syringo-pleural shunt.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.8
• /
• pp.30-36
• /
• 2002

Wind tunnel model has some difference in shape compared to the real flight vehicle because of model support system for testing. The support system can make some differences in the measured forces and moments to the flight test data. There are several correction methods involved such as cavity pressure correction and model support interference. Internal balance and belly sting support were used for this wind tunnel test and three types of model support correction methods, variable sting thickness method, dummy sting method, and wire support method, were compared. Variable sting thickness method is well matched with wire support method, which is known for almost interference free.

• Design & Manufacturing
• /
• v.14 no.2
• /
• pp.34-41
• /
• 2020

Typical characteristics of medical device parts are that they can not be reused and there are many disposable products. Therefore, there is a need for an injection molding machine having excellent repeatability of molding conditions and a precision injection mold for mass production. Recently, the performance of an injection machine has made a remarkable evolution compared to the past. However, defects such as short-shot, flash, weld line, gas burning, warpage, and deformation, which are typical defects, still do not disappear at all. This is due to the lack of gas ventilation from the product cavities, even if the gas is smoothly vented from the sprue and runner of the mold. For this reason, the internal pressure of the cavity rises and is directly connected to the quality defects. In this study, an active gas vent system was designed to prevent defects due to trapped gas in the cavity. Since it can be easily adjustable in response to the molding conditions and the mold temperature changes, it is expected to improve productivity due to the reduction of the defective ratio.