• Proceedings of the PSK Conference
• /
• 2003.04a
• /
• pp.279.2-280
• /
• 2003

A simple and accurate reverse-phase high performance liquid chromatography (HPLC) coupled with photodiode array was developed for the determination of dextromethorphan(DM) and its metabolite dextrorphan(DX) in human urine. Chromatographic separation was accomplished on a cyano analytical column at 220 nm using a mobile phase containing 25 mM triethylammonium phosphate buffer(PH 3.0) in a 0-70％ ACN gradient and triazolam(TZ) was used as internal standard(I.S). (omitted)

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.4
• /
• pp.174-181
• /
• 2002

In this Paper, we proposed the method for the TIT (Theoretical Inter-arrival Time) was suggested in which it saves the cells by using the data buffer in the system rather than by using one separately from the internal controller, and it also releases these cells saved. The method of TIT complements the defect of the accumulation of the delay in the method of RDT which considers the time of the cell that is discharged from the established cell interval controller. And, in order to apply the merit of RDT, the method of TIT sets its standards on the cells arrival time as it was in the method of RAT.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.7 no.3
• /
• pp.121-127
• /
• 2012

An integrated crypto engine for encryption and decryption of AES algorithm based on unified data-path architecture is efficiently designed and implemented in this paper. In order to unify the design of encryption and decryption, internal steps in single round is adjusted so as to operate with columns after row operation is completed and efficient method for a buffer is developed to simplify the Shift Rows operation. Also, only one S-box is used for both key expansion and crypto operation and Key-Box saving expended key is introduced provide the key required in encryption and decryption. The functional simulation based on ModelSim simulator shows that 164 clocks are required to process the data of 128bits in the proposed engine. In addition, the proposed engine is implemented with 6,801 gates by using Xilinx Synthesizer. This demonstrate that 40% gates savings is achieved in the proposed engine, compared to individual designs of encryption and decryption engine.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.3
• /
• pp.55-61
• /
• 2000

This paper presents an efficient hardware architecture of frame memory interface in MPEG-2 video encoder. To reduce the size of memory buffers between SDRAM and the frame memory module, the number of clocks needed for each memory access is minimized with dual bank operation and burst length change. By allocating the remaining cycles not used by SDRAM access, to the random access cycle, the internal buffer size, the data bus width, and the size of the control logic can be minimized. The proposed architecture is operated with 54MHz clock and designed with the VT $I^{тм}$ 0.5 ${\mu}{\textrm}{m}$ CMOS TLM standard cell library. It is verified by comparing the test vectors generated by the c-code model with the simulation results of the synthesized circuit. The buffer area of the proposed architecture is reduced to 40 % of the existing architecture.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.4
• /
• pp.31-43
• /
• 1999

The main goal of this paper is to design a high performance SVP(Stack based Video Processor) for network applications. The SVP is a comprehensive scheme; 'better' in the sense that it is an optimal selection of previously proposed enhancements of a stack machine and a video processor. This can process effectively object-based video data using a S-RISC(Stack-based Reduced Instruction Set Computer) with a semi -general-purpose architecture having a stack buffer for OOP(Object-Oriented Programming) with many small procedures at running programs. And it includes a vector processor that can improve the MPEG coding speed. The vector processor in the SVP can execute advanced mode motion compensation, motion prediction by half pixel and SA-DCT(Shape Adaptive-Discrete Cosine Transform) of MPEG-4. Absolutors and halfers in the vector processor make this architecture extensive to a encoder. We also designed a VLSI stack-oriented video processor using the proposed architecture of stack-oriented video decoding. It was designed with O.5$\mu\textrm{m}$ 3LM standard-cell technology, and has 110K logic gates and 12 Kbits SRAM internal buffer. The operating frequency is 50MHz. This executes algorithms of video decoding for QCIF 15fps(frame per second), maximum rate of VLBV(Very Low Bitrate Video) in MPEG-4.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.372-375
• /
• 2008

IEEE 802.11e standardized the EDCA mechanism to support the priority based QoS. And the virtual collision handler schedules the transmission time of each MAC frame using the internal back-off window according to the access category(AC). This can provides the differentiated QoS to real-time services at the medium traffic load condition. However, the transmission delay of MAC frame for real-time services may be increased as the traffic load of best effort service increases. It becomes more critical when the real-time service uses a compressed mode video codec such as moving picture experts group(MPEG) 4 codec. That is because each frame has the different importance. That is, the I-frame has more information as compared with the P- and the B-frame. In this paper, we proposed a buffer management algorithm based on the frame importance and the delay bound. The proposed algorithm is consisted of the traffic regulator based on the dual token bucket algorithm and the active queue management algorithm. The traffic regulator reduces the transmission rate of lower AC until that the virtual collision handler can transmit an I-frame. And the active queue management discards frame based on the importance of each frame and the delay bound of head of line(HoL) frame when the channel resource is insufficient.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.6
• /
• pp.48-56
• /
• 2010

Since ancient times, Korea has been called a land of beauty. Scenic sites under the Cultural Properties Protection Act include picturesque places that are famous for their natural scenic beauty as well as their historical and cultural value. Scenic sites are managed as natural assets to promote their preservation and use. However, the management of scenic sites can produce adverse effects on regional development and ownership rights. Moreover, the purpose of their designation as cultural assets is not fully understood because scenic sites are managed by focusing on restraint on users' act the same as was applied to historic sites. Therefore, the purpose of this study is to protect inhabitants' rights of ownership by arranging the boundaries of designated areas and by providing standard permission for condition changes in the Buryeongsa Valley, which was designated as a Scenic Site in 1979. The results of this study can be summarized as follows: First, arranging the boundaries of the designated area includes the arrangement of the edge lines standardized on the visual range of the mountain ridge, preventing the loss of landscape beauty in the designated district; the internal clearing district focuses on the existing settlement. Gearing the designated areas after the arrangement of the boundaries results in $11,928,932m^2$, 38.6% compared to the existing designated areas. Second, it establishes a 500m buffer zone inside the radius of the boundary of the cultural asset as a standard for condition changes that seriously affect landscape preservation. Third, the standards for permission on building 'height regulations' are divided into flat and gable, according to the roof shape. The adopted standard is 8m high for 2 story flat roofs, and 12m high for 2 story gable roofs.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.2
• /
• pp.79-91
• /
• 2019

In the entertainment industry, risk management is crucial for securing competitiveness due to the risk of investment. The competitiveness of contents is reinforced when external factors such as industrial environment and internal factors centering on involving mechanism are simultaneously provided. The involving mechanism is a form of cognitive response behavior of the audience and occurs through signal processing of the brain when watching the image contents. The signal processing of the brain related to the contents watching is mainly performed in the working memory area, and in the case of the captivating movie, the information other than the contents transmitted to the audience is blocked to generate a temporary dissociation state. A dissociation state similar to a symptom such as hypnosis or amnesia occurs when the audience's level of involving is high. On the other hand, contents information in which the audience is concentrating his attention is used intensively for constructing future thinking through an episodic buffer while the inflow of external information is relatively blocked or delayed. The spectator's future thinking configuration takes the form of a hypothesis-forming activity and is based on the predictability of the brain. When these hypothesized behaviors correspond to the problem solving simulation of story and predictability which is an evolutionary function of the brain, the audience' s brain is involved in the contents at a high level. In order for the act to be effective, the factors such as the background of the hypothesis, the subject of the hypothesis, the internal information of the person, the type and position and quantity of the hypothesis information, and the hypothesis relevance and type of information are important. Based on these factors, analysis of the Kim Eun Sook Drama 'Goblin' shows that the above elements are operated in a very organic and meaningful way.

• Analytical Science and Technology
• /
• v.20 no.4
• /
• pp.323-330
• /
• 2007

A simple and rapid HPLC method with fluorescence detection(FLD) for quantitation of penciclovir in human plasma using a monolithic column was developed and validated. Penciclovir and ganciclovir(internal standard, I.S.) were separated on a Chromolith column RP-18e ($4.6{\times}100mm$) with a mobile phase consisting of a mixture of (A) methanol/50 mM sodium phosphate buffer containing 200 mg/L sodium dodecyl sulfate (3/97, pH 2.5) and (B) methanol/50 mM sodium phosphate buffer containing 200 mg/L sodium dodecyl sulfate (50/50, pH 2.5) at a flow gradient of $1.6{\sim}4.0mL/min$. The retention times of penciclovir and internal standard were less than 4.0 min. Calibration curve was linear ($R^2=0.9994$) over a concentration range of $0.1{\sim}5{\mu}g/mL$. Intra-day precision, accuracy and inter-day precision were 1.36~8.55 %, 92.8~100.0 % and 0.93~5.62 %, respectively with a limit of quantitation at $0.1{\mu}g/mL$. The present HPLC-FLD method is sensitive, precise and accurate. The method described herein has been successfully used for the bioequivalence study of a famciclovir formulation product after oral administration to healthy Korean volunteers.

• The Journal of the Korean Society for Microbiology
• /
• v.20 no.1
• /
• pp.91-102
• /
• 1985

The advantages of enzyme-linked immunosorbent assay(ELISA) are its senstivity and simplicity in detecting IgG, IgM and IgA antibody. To apply ELISA to diagnosis of typhoid fever, antigen such as lipopolysaccharide of Salmonella typhi or killed whole cell must be coated on solid phase. It is easy to coat lipopolysaccharide on ELISA plate but troublesome to purify it. As it is easy to obtain the killed whole cells, the development of the appropriate method by which those antigens of S. typhi are optimally coated on solid phase is needed. To establish the appropriate method, carbonate buffer, methanol or poly-L-lysine was applied as binding substance on polystyrene or polyvinylchloride plate as solid phase when the killed whole cell antigens of S. typhi varided as follows: $10^6$, $10^7$, $10^8$ and $10^9\;cell/ml$. The criteria of the optimal method were determined as follows: 1. The optical density of positive sera is above 1.0(0.6 in IgM) at 1:10 serum dilution and is 0.3(0.2 in IgM) higher than that of negative sera: 2. The O.D. of sera is flat or lowering according to serum dilution: 3. It must be that the O.D. of negative sera is lower than 0.2 at the point of serum dilution where the O.D. of positive sera is higher than 1.0(0.5 in IgM). The results obtained were summarized as follows: 1. The methods which fitted the above criteria were to use poly-L-lysine as binding substance, polyvinylchloride plate as solid phase and $10^7\;cell/ml$ as antigen concentration of S. typhi(poly-L-lysine/polyvinylchloride/$10^7$) and poly-L-lysine/polyvinylchloride/$10^8$ in detecting IgG antibody, methanol/polystyrene/$10^9$, poly-L-lysine/polyvinylchloride/$10^8$ and poly-L-lysine/polyvinylchloride/$10^9$ in IgM and carbonate buffer/polystyrene/$10^8$, carbonate buffer/polystyrene/$10^9$, methanol/polystyrene/$10^8$, methanol/polyvinylchloride/$10^8$, methanol/polyvinylchloride/$10^9$, poly-L-lysine/polyvinylchloride/$10^8$ and poly-L-lysine/polyvinylchloride/$10^9$ in IgA. 2. The coaling method using poly-L-lysine, polyvinylchloride plate and $10^8\;cell/ml$ was best to assay IgG, IgM and IgA antibody all in one. By this method, to assay the each immunoglobulin calss with an appropriate fixed serum dilution, 1:320 dilution was best.