• 한국해양공학회지
• /
• 제29권1호
• /
• pp.34-44
• /
• 2015

A hydraulic tensile test machine (HSTM) is one of the devices used to obtain the flow stress of a material during high-speed elongation. This paper first describes some features of a newly built HSTM. The improvement histories of the upper and lower jigs, which are the most vital parts of the HSTM, are also presented. We have frequently witnessed test failures with 1st generation jigs and specimens due to slip between the jig and specimen. 2nd generation jigs provide more stable test results, but the use of a longer upper jig induces excessive vibration and consequently makes it difficult to attach an environment chamber. 3rd generation jigs have some advances in terms of the symmetric fastening between the upper jig and specimen, as well as an exemption from direct contact between the lower jig and specimen. The performance of an environment chamber is verified by high and low temperature tests. A high-speed displacement measurement system is introduced based on a high-speed camera and motion-tracking software with aid of a surface grid device for the specimen.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1148-1155
• /
• 2010

To suggest a modified shallow foundation design method which can be considered the scale effect of foundation on IGM(intermediate geomaterial) soil layer, the weathered soil layer that is uniformly formed up to 8m(2B) with over 50 N-value is selected and 3 times field loading tests are performed on several sized square-shaped shallow foundations with 30, 75, 150, 240 and 400cm in width respectively. Because the soil modulus of elasticity(Es) calculated by soil investigation and 1st field test(PBT) results showed an underestimated tendency, a modified correlation is required for the reasonable estimation of Es on the weathered soil. Also, the N-value was increased with an increasing in depth. However, the N-values around the test foundations showed the different values even though the foundations on the same level because the test site was arranged by excavation. Therefore, the more detail soil investigations are required for the each test foundations respectively. Since Es based on elasticity theory is determined by the stress distribution shape of the foundation and elasticity modulus of the soil, the scale effect considered pressure-settlement curve can be clearly derived from the correlation on stress distribution shape and the variation of soil elasticity modulus with depth. Therefore, the modified correlation will be suggested to estimate a reasonable Es on the weathered soil, and the scale effect considered shallow foundation design method is also developed based on the elastic theory and field tests in this research.

• 대한치과기공학회지
• /
• 제39권1호
• /
• pp.43-52
• /
• 2017

Purpose: Physical and chemical properties of gold is most suitable to be restored of teeth to its original state. Recently zirconia was used instead of gold because of esthetical and intimacy of human body. Because of high strength and high abrasion resistance of zirconia, all zirconia artificial tooth lead to wear the original tooth of opposite site. To preserve this original tooth, zirconia artificial tooth covered with dental ceramic glass was used. When joining the zirconia core and dental ceramic glass, difference of their thermal expansion coefficient and wetting ability is generated the residual stress at interface lead to crack. In order to solve this problem, intermediate layer what is called zir-liner was imported to decrease the residual stress and increase the bonding strength. Methods: In this study, to identify the optimum conditions for manufacturing process, various methods to rough the surface of zirconia core were adopted, and vary the thickness of interlayer, and analyzed bond strength. Results: Bond strength of sanding specimens group showed higher than that of non-sanding specimens group, and once applied intermediate layer with sanding specimens showed highest bond strength with 28 MPa. SEM photomicrographs of zirconia cores fired at $1500^{\circ}C$ showed parallel straight lines in sanding and pockmarked surface in blasting surfaces as abrasion traces. Observation of the destruction section after shear test by SEM were carried out. Liner applied non-sanding group and non-liner applied sanding group all showed interfacial crack. Sandblasting group with non-liner showed remained dental ceramic glass on the surface of zirconia. Sandblasting group with once applied liner showed partially remained liner and dental ceramic glass on the surface of zirconia. XRD analysis revealed that sandblasting group showed higher monoclinic peaks than other specimens group and this result was due to the high collision energy for stress induced phase transformation. Conclusions: A study on the improvement of bonding strength between zirconia and dental ceramic glass steadily carried out for the future to practical use.

• Geomechanics and Engineering
• /
• 제32권1호
• /
• pp.49-68
• /
• 2023

The three-dimensional failure criterion is essential for maintaining wellbore stability and sand production problem. The convenient factor for a stable wellbore is mud weight and borehole orientation, i.e., mud window design and selection of borehole trajectory. This study proposes a new three-dimensional failure criterion with linear relation of three in-situ principal stresses. The number of failure criteria executed to understand the phenomenon of rock failure under in-situ stresses is the Mohr-Coulomb criterion, Hoek-Brown criterion, Mogi-Coulomb criterion, and many more. A new failure criterion is the extended Mohr-Coulomb failure criterion with the influence of intermediate principal stress (σ₂). The influence of intermediate principal stress is considered as a weighting of (σ₂) on the mean effective stress. The triaxial compression test data for eleven rock types are taken from the literature for calibration of material constant and validation of failure prediction. The predictions on rock samples using new criteria are the best fit with the triaxial compression test data points. Here, Drucker-Prager and the Mogi-Coulomb criterion are also implemented to predict the failure for eleven different rock types. It has been observed that the Drucker-Prager criterion gave over prediction of rock failure. On the contrary, the Mogi-Coulomb criterion gave an equally good prediction of rock failure as our proposed new 3D failure criterion. Based on the yield surface of a new 3D linear criterion it gave the safest prediction for the failure of the rock. A new linear failure criterion is recommended for the unique solution as a linear relation of the principal stresses rather than the dual solution by the Mogi-Coulomb criterion.

• Asian-Australasian Journal of Animal Sciences
• /
• 제29권6호
• /
• pp.895-900
• /
• 2016

The present study aims to confirm the influence of a horse-riding lesson program (HRLP) on the stress level of horses and riders by respectively analyzing their salivary cortisol concentration. Twenty-four healthy horses and 23 riders participated in this study. The horses were randomly classified into two groups for the horse riding lesson program: Class 1 (for the beginner lesson) and Class 2 (for the intermediate lesson). The Class 1 group consisted of 12 horses and 12 riders, while the Class 2 group consisted of 12 horses and 11 riders. Salivettes cotton wool swabs were used for saliva collection and the saliva analyses were conducted using a two-way analysis of variance for repeated measures with SAS version 8. As for the results, the average salivary cortisol concentration of all horses before HRLP significantly increased compared to the baseline (p<0.001) while it decreased after the HRLP. The results of the salivary cortisol concentration of the riders were similar to the horses' results. However, there was no difference during the HRLP between Class 1 and Class 2 in the horse or rider groups. The results suggest that the HRLP did not influence the stress level of the horses or riders. Thus, this study provides the necessary information and guidelines for future studies on stress in horses during riding and gives insight into better horse welfare and management options.

• Earthquakes and Structures
• /
• 제11권3호
• /
• pp.505-516
• /
• 2016

This paper evaluates the scaling of ground motions recorded from nine intermediate-depth earthquakes produced in the Vrancea seismic zone in Romania. The considered ground motion database consists of 363 horizontal recordings obtained on soil classes B and C (according to Eurocode 8). An analysis of the inter- and intra-event spectral accelerations is performed in order to gain information regarding the magnitude and distance scaling of the Vrancea ground motions. The analyses reveal a significant influence of the earthquake magnitude and focal depth on the distance scaling and different magnitude and distance scaling for the two soil classes. A linear magnitude and distance scaling is inferred from the results for the range of magnitudes $5.2{\leq}M_W{\leq}7.1$. The results obtained are checked through stochastic simulations and the influence of the stress drop and kappa values on the ground motion levels is assessed. In addition, five ground motion models which were tested in other studies using recordings from Vrancea earthquakes are analyzed in order to evaluate their corresponding host stress drop and kappa. The results show generally a direct connection between the host kappa values and the host stress drop values. Moreover, all the ground motion models depict magnitude dependent host kappa and stress drop levels.

• Journal of Welding and Joining
• /
• 제2권1호
• /
• pp.49-57
• /
• 1984

The influence of weld defect, residual stress and microstructure on the Low Cycle Fatigue(L. C. F.) behaviour of AISI 304L austenitic stainless steel weldment has been studied. The specimens were welded by shielded metal are welding process, post weld heat treated(PWHT) at 900.deg.C for 1.5hrs, and tested under total strain controlled condition at room temperature. The results of the experiment showed that weld defect affected the L.C.F. behaviour of weldment deleteriously compared to the residual stress or microstructure, and it reduced the L.C.F. life about 70-80%. The PWHT exhibited beneficial effect on the L.C.F. behaviour and increased the L.C.F. life about 120%. This enhancement by PWHT was attributed to the removal of residual stress and recovery of weld metal ductility. The cyclic stress flow of as welded specimens showed intermediate cyclic softening, whereas those of heat treated specimens showed continuous cyclic hardening, and this difference was explained in terms of the residual stress removal and dislocation behaviour. Scanning electron microscopy studies of fatigue fracture surface showed that weld defects of large size and near weld surface were detrimental to the L.C.F. behaviour of weldment.

• 한국구조물진단유지관리공학회 논문집
• /
• 제15권5호
• /
• pp.101-112
• /
• 2011

본 논문은 중간부 부착파괴된 CFRP 보강 RC 보의 휨강도 산정을 다루고 있다. CFRP 보강 RC 보의 중간부 부착파괴의 영향을 고려하기 위해 강도감소계수를 제안하였다. 제안된 계수는 CFRP의 유효응력(또는 유효변형률)과 극한응력(또는 극한변형률)비로 정의 되는 유효변률 모델을 이용하여 실험데이터로부터 유도하였다. 휨강도 산정식은 강도감소계수를 변수로 하여 함수를 구성하였다. 제안된 강도감소계수의 유효성, 정확성 및 타당성을 입증하기 위해서 각국의 설계기준 및 연구자들에 의해 제안된 계수 값과 실험값을 본 연구결과와 비교 및 검증했다. 본 논문에서 제시하는 해석 결과는 제안된 강도감소계수가 중간부 부착파괴된 CFRP 보강 RC 보의 휨강도를 매우 효율적으로 평가할 수 있음을 나타낸다.

• 한국도로학회논문집
• /
• 제10권4호
• /
• pp.281-292
• /
• 2008

국내 LTPP(Long Term Pavement Performance) 연구에서 섬유보강 아스팔트 포장의 성능을 평가하기 위해, 국도 1호선 구간에 일반 아스팔트 포장과 섬유보강 아스팔트 포장을 각각 시공하였으며, 각각의 단면에 포장체 구조적 거동을 측정할 수 있는 계측센서를 매설하였다. 본 연구에서는 국내 LTPP구간에서 수행된 차량재하시험과 FWD시험의 결과를 바탕으로 섬유보강 아스팔트 포장의 구조적 성능을 평가하였다. 본 연구결과, 차량재하시험에서 섬유보강재를 사용할 경우 표층하단부의 변형률이 크게 저감되는 것을 확인하였다. 또한 일반 아스팔트 포장보다 응력중립축이 상승하여 일반 아스팔트포장은 중간층 하단에서 압축변형이 발생하는 반면에, 섬유보강 아스팔트포장은 중간층 하단에서 인장변형이 발생하였다. 반면 기층 하단부에서의 인장변형률은 두 포장형식 모두 큰 차이를 나타내지 않았다. FWD 시험에서도 섬유보강재를 사용할 경우 약 24% 정도 표면 처짐 량이 저감되는 것을 확인하였다. 이와 같은 결과를 종합하여 볼 때, 섬유보강 아스팔트 포장이 소성변형에 대한 저항성을 증진시킬 수 있다고 판단되며, 향후에 포장상태조사를 통해 장기포장공용성에 대한 연구가 수반되어야 할 것이다.

• 가족자원경영과 정책
• /
• 제12권2호
• /
• pp.57-72
• /
• 2008

The propose of this study is to examine the economic stresses and coping strategies for elderly households depending on the variables of background, and to analyze the relations between these factors. Elderly households which satisfied the following criteria were recruited for participation: (a) reside in Seoul, or in the metropolitan area (b) live apart from their adult children after retirement and (c) ages over sixty. From September 20th, 2006 to November 30th, 2006, 296 were used for this research. First, the mean score of the economic stress level of elderly households was 2.87 out of 5, and the stress levels of income expenditure and asset debt were intermediate. The mean score of the economic coping strategy was 3.17 out of 5. In order to overcome economic stress, elderly households utilized reducing their expenditure, financial management, and re-employment. The level of elderly households' life satisfaction was 3.29 of 5 and the depression was 3.17 of 5. Second, there was a difference in accordance with the objective economic variables and the degree of the economic stress after the review of the variables of the elderly households and the coping strategy due to economic stress. The result shows that the households which had a low economic status and high economic stress from the objective viewpoint participated in more economic activities. Their reactions were to decrease the overall expenditure through reducing the expenditure rather than to manage the asset effectively through re-employment or to inaugurating a business. Third, I analyzed situational factors, economic stress, and economic coping strategy in order to compare relative contributors to psychological well-being through using regression. At the third phase in the process of analysis, the socio-psychological factors appeared to be significant factors contributing to psychological well-being. Regarding the stress caused by income expenditure increased, when elderly households were more concerned about reducing expenditure and re-employment, their feelings of depression increased.