• 한국자동차공학회논문집
• /
• 제13권2호
• /
• pp.127-134
• /
• 2005

This paper introduces a newly developed high speed material testing apparatus for tensile tests at the strain rate up to 500/sec. The tensile properties of sheet metals are indispensable for the accurate crashworthiness analysis of auto-bodies since the local strain rate reaches to 500/sec in the car crash. An appropriate experimental method has to be developed to acquire the tensile properties at the intermediate strain rate ranged from 0.003/sec to 200/sec. Tensile tests of various different steel sheets for an auto-body were perform ed to obtain the dynamic properties with respect to the strain rate. The dimensions of specimens that can provide the reasonable results were determined by the finite element analysis. A special jig fixture of a load cell is designed to reduce the load ringing phenomenon induced by unstable stress propagation at the high strain rate. Stress-strain curves were acquired for each steel sheet from the dynamic tensile test and utilized to obtain the relationship of the stress to the strain rate.

• 한국수산과학회지
• /
• 제55권5호
• /
• pp.688-696
• /
• 2022

Obesity could cause immune-physiological disorders in fish. Yet, little is known about the impact of obesity on stress and histological responses. This study aimed to determine histological and physiological changes in and vulnerability of overfeeding-induced obese rainbow trout Oncorhynchus mykiss exposed to stress condition. Control, intermediate and overfed groups were fed at 1.5, 2.5 and 3.09% of their body weight per day, respectively, for eight weeks. Weight gain, body mass index, hepatosomatic index and serological parameters, and histology of liver were measured in five fish from each group at week 0, 2, 4, and 8. At week 8, 20 fish from each group were exposed to heat stress by increasing water temperature at a rate of 3℃ per day from 15 to 25℃ and maintaining the final temperature for 10 days. Overall, overfed fish showed significantly higher weight gain, body mass index, and serological parameters than those of fish in the other groups. Fish in the overfed and intermediate groups displayed multifocal infiltration of inflammatory cells in hepatic parenchyma. Mortality rate and serological parameters of fish in the overfed group exposed to heat stress were significantly higher than those of fish in the other groups, indicating increased vulnerability to environmental stress.

• Structural Engineering and Mechanics
• /
• 제84권3호
• /
• pp.375-391
• /
• 2022

This paper discussed and analyzed the interfacial stress distribution characteristic of adjacent cracks in Carbon Fiber Reinforced Polymer (CFRP) plate strengthened concrete slabs. One un-strengthened concrete test beam and four CFRP plate-strengthened concrete test beams were designed to carry out four-point flexural tests. The test data shows that the interfacial shear stress between the interface of CFRP plate and concrete can effectively reduce the crack shrinkage of the tensile concrete and reduces the width of crack. The maximum main crack flexural height in pure bending section of the strengthened specimen is smaller than that of the un-strengthened specimen, the CFRP plate improves the rigidity of specimens without brittle failure. The average ultimate bearing capacity of the CFRP-strengthened specimens was increased by 64.3% compared to that without CFRP-strengthen. This indicites that CFRP enhancement measures can effectively improve the ultimate bearing capacity and delay the occurrence of debonding damage. Based on the derivation of mechanical analysis model, the calculation formula of interfacial shear stress between adjacent cracks is proposed. The distributions characteristics of interfacial shear stress between certain crack widths were given. In the intermediate cracking region of pure bending sections, the length of the interfacial softening near the mid-span cracking position gradually increases as the load increases. The CFRP-concrete interface debonding capacity with the larger adjacent crack spacing is lower than that with the smaller adjacent crack spacing. The theoretical calculation results of interfacial bonding shear stress between adjacent cracks have good agreement with the experimental results. The interfacial debonding failure between adjacent cracks in the intermediate cracking region was mainly caused by the root of the main crack. The larger the spacing between adjacent cracks exists, the easier the interfacial debonding failure occurs.

• International Journal of Reliability and Applications
• /
• 제17권1호
• /
• pp.21-49
• /
• 2016

Many mechanical, electrical and electronic products have more than one performance characteristics (PCs). For example the performance degradation of rubidium discharge lamps can be characterized by the rubidium consumption or the decreasing intensity the lamp. The product may degrade due to all the PCs which may be independent or dependent. This paper deals with the design of optimal bivariate step-stress partially accelerated degradation test (PADT) with degradation paths modelled by gamma process. The dependency between PCs has been modelled through Frank copula function. In partial step-stress loading, the unit is tested at usual stress for some time, and then the stress is accelerated. This helps in preventing over-stressing of the test specimens. Failure occurs when the performance characteristic crosses the critical value the first time. Under the constraint of total experimental cost, the optimal test duration and the optimal number of inspections at each intermediate stress level are obtained using variance optimality criterion.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.248-251
• /
• 2009

AB100 & CB100 are general products in the steel beam of the section shape. They are applied for construction, welding and shipbuilding structures. But currently roll damages are generated in the intermediate & finish mills during producing AB 100, CB100. The goal of this project is to conduct rolling & roll stress analysis using the 3D FEM program and to research the things which roll diameter affects roll stress. By the analysis results, it is determined that the recording roll stress where the roll diameter will be big comes to be small, and it is recognized that roll damage occurrences of finish rolling mills can be high by roll stress analysis results.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1989년도 가을 학술발표회 논문집
• /
• pp.77-82
• /
• 1989

In this paper an experimental approach of the relocation plastic hinging zones of nine reinforced concrete exterior beam-column subassemblages under cyclic loads was tried. The main parameters of the testing program were location of the plastic hinge, difference of the special reinforcement, inclined or intermediate layers of longitudinal reinforcement, applied maximum shear stress. The conclusions presented herein are based on the limited texts conducted. Inclined or intermediate layers of longitudinal reinforcement and extra top and bottom steel in the beam over a specific legnth can be used to move the beam plastic hinging zone away from the column face. But, for the use of intermediate layers of longitudinal reinforcement, sheat reinforcement detail need further investigation.

• 대한음성학회지:말소리
• /
• 제40호
• /
• pp.13-27
• /
• 2000

It is generally accepted that there appears the rising tone at the end of the intermediate phrase in standard Korean. There have been discussions about whether the syllable with the rising tone, even if it is a particle or an ending, might be accented or not. The accented syllable is the most prominent one in the given phonological strings. It is determined by the nondistinctive stress which is located on the first or second syllable of lexical word according to vowel length and syllable weight. So pitch does not have any close relationship with accent. The intermediate phrase-final rising tone, therefore, is not associated with accent, but used to convey other pragmatic meanings, that is, i) speech style is more friendly, ii) the speaker tries to send the information for the hearer to hear more clearly, and iii) the speaker wants the hearer to keep on listening to him or her because the speaker's utterance is not complete.

• 가정과삶의질연구
• /
• 제31권5호
• /
• pp.125-141
• /
• 2013

This research aims to integrate study results through a meta-analysis of previous studies on the variables related with social support for female marriage immigrants. Based on the results, this study established the foundation of an integrated social support system for female marriage immigrants which considers both the functional perspective and structural perspective of social support, and suggested plans for an efficient support system. All social support was positively associated with female marriage immigrants marriage life, child-rearing behavior and attitude, reduction of stress and depression and psychological stability. In relation to the effect size of each variable related with all social support, the marriage variable had the biggest relationship with it, followed by the parenting variable, the psychological variable and the stress variable in that order. With reference to the relationship with related variables according to the sub-domain of social support, from the structural perspective, spousale support showed a high relationship with the marriage variable and the stress variable. It was also especially, very highly related with the marriage variable. In addition, a married woman's family support and expert support had an intermediate relationship with the marriage variable, and the husband's family support and friend support had a low relationship with it. From the functional perspective, material support had a very high relationship with the marriage variable, whereas it had a low relationship with the stress variable and the psychological variable. Emotional support was also highly related with marriage variable, but showed an intermediate or low relationship with the psychological variable and the stress variable. On the other hand, informational support displayed an intermediate relationship with the stress variable and the psychological variable, and a high relationship with the marriage variable. Lastly, evaluative support had a high relationship with the marriage variable and the psychological variable. Based on these results, this study proposed plans for an integrated social support system as follows. First, education ought to be provided for the spouses, and support for marital adjustment should be offered. Second, there plans should be made for continuous bonding with the family of origin, and support should be given to address changes in awareness of the relationship with the husband's parents. Third, it is required to revitalize the local community and self-help groups, and provide the female marriage immigrants with opportunities to participate in social activities.

• 지질공학
• /
• 제32권4호
• /
• pp.597-610
• /
• 2022

중간주응력을 고려한 마찰재료의 파괴거동에 대한 확고한 이해는 대심도 보어홀 안정성 및 단층해석 등과 관련된 현장 적용의 고도화를 위한 필수적인 과정이다. 본 연구는 진삼축압축 조건을 물리적으로 구현하는 장비를 설계·제작하였으며 마찰재료로 제작된 석고 시료에 대한 진삼축압축시험을 통하여 재료의 파괴거동 특성을 논의하고 삼차원파괴함수의 적용성을 검토하였다. 진삼축압축시험을 위한 석고 재료는 52(w) × 52(l) × 104(h) mm의 직육면체 시료로 성형하였으며 다양한 조합의 𝜎₃, 𝜎₂의 조건으로 총 24회의 진삼축압축시험이 수행되었다. 또한, 삼차원 파괴기준식의 파라미터로 사용되는 석고의 강도정수 측정을 위하여 전통적인 일축압축시험 및 삼축압축시험이 수행되었다. 석고 재료의 응력-변형 특성은 중간주응력과 최소주응력의 차이가 클수록 취성거동이 더욱 강하게 나타났으며, 시료의 강도 및 변형은 중간주응력의 변화를 반영하는 것으로 평가되었다. 주응력 좌표계에서 시험 데이터에 대한 비선형 다중회귀분석을 수행한 결과 수정 Wiebols-Cook 파괴기준 및 수정 Lade 파괴기준이 석고 시료에 대한 삼차원 파괴기준으로 가장 적합하였다.

• 한국지반공학회지:지반
• /
• 제12권3호
• /
• pp.5-16
• /
• 1996

실리카질 모래에 대한 많은 시험결과로부터 삼축압축시첩과 평면변형시험간의 강도관계를 밀도와 파괴시 유효평균주응력의 함수로 표현하였다. 또한 파괴시 평균주응력과 축차응력간의 응력비가 내부마찰각의 함수로 잘 규정되었으며 그 비는 내부마찰각의 증가에 따라 감소하였다. 또한 중간주응력을 최대주응력과 최소주응력으로써 표현하였으며 이론적인 파괴면의 각도와 평면변형시험에서 관찰된 파괴면의 각도가 비교적 잘 일치함이 확인되었다.