• 제목/요약/키워드: Intermediate products

검색결과 376건 처리시간 0.028초

Comparison of Diets of Urban American Indian and Non-Hispanic Whites: Populations with a Disparity for Biliary Tract Cancer Rates

  • Glew, Robert H.;Wold, Rosemary S.;VanderJagt, Dorothy J.
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제13권7호
    • /
    • pp.3077-3082
    • /
    • 2012
  • Aim: The incidence of biliary tract cancer (BTC) is many-fold higher for American Indians (AI) relative to non-Hispanic whites (NHW). Neither gallstones nor genetics can account for this difference. There is speculation that certain fatty acids in bile may play a role in preventing BTC. Since diet may influence composition of bile, we compared the dietary intakes of urban AI and NHW adult women in New Mexico. Methods: Design, a cross-sectional study of the diets of lactating AI and NHW women was conducted. Setting, the University of New Mexico Hospital. Participants, healthy lactating women 18 to 39 years of age were recruited. Main outcome measures, a three-day diet record for each participant was analyzed. Results: The AI women consumed less calcium (p = 0.04) and significantly less short and intermediate chain-length fatty acids (C4-C12), but nearly twice as much proinflammatory arachidonic acid as the NHWs (p <0.01). The intake of dairy products by AI women was less than NHW women (p = 0.01) while the intake of processed meat products was higher (p <0.01). Conclusion: Dietary factors may account for the difference in the risk of BTC between AI and NHW women.

4-Methacryloyloxyphenoxy기와 4'-((S)-(+)-2-methylbutoxy)biphenyl-4-carboxyl 메소겐기를 갖는 새로운 메타크릴레이트 액정화합물: 1. 단량체의 합성 및 특성 (New Liquid Crystalline Methacrylate Polymers Containing 4-Methacryloyloxyphenoxy Group and 4'-((S)-(+)-2-Methylbutoxy)biphenyl-4-carboxyl Mesogenic Group: 1. Synthesis and Characterization of the Monomers)

  • 소봉근;이상호;이수민
    • 대한화학회지
    • /
    • 제48권6호
    • /
    • pp.599-608
    • /
    • 2004
  • 유연격자와 메타크릴로일 기 사이에 도입된 벤젠 고리와 메소겐 구조의 말단에 연결된 키랄 중심을 갖는 새로운 두 계열의 메타크릴레이트 단량체를 합성하였다. 이 두 계열에서 유연격자와 메소겐 기의 길이 변화에 따른 액정형성에 대한 효과를 조사하였다. 첫 번째 계열의 화합물들은 합성과정에서 얻어진 중간물질이나 최종물질에서 액정성을 보이지 않았다. 그러나 두 번째 계열에서는 중간물질 뿐만아니라 최종물질에서도 액정성을 보였다.

저온 상압에서 합성된 Na, TPA-ZSM-5의 결정화에 관한 분광학적 고찰 (Spectroscopic Studies on Crystallization of Na, TPA-ZSM-5 synthesized at Low Temperature and Atomospheric pressure)

  • 윤영자;하재목
    • 분석과학
    • /
    • 제10권1호
    • /
    • pp.18-30
    • /
    • 1997
  • Si / Al비가 130 정도인 Na, TPA-ZSM-5를 저온 상압법으로 합성하였으며, 이들의 결정화 과정을 XRD, XRF, FT-IR, NMR 및 SEM을 이용하여 고찰하였다. 결정의 형성과정은 autoclave법과는 다소 다르게 나타났으나 최종 생성물의 분광학적 특성은 전형적인 ZSM-5 영역에서 나타났다. 또한 반응 도중 생성된 국부결함은 소성에 의해 제거됨을 알 수 있었으며, 저온상압하에서도 반응시간을 48시간 이내로 단축할 수 있음을 알 수 있었다.

  • PDF

열가소성 직물탄소복합소재 사출 성형품의 표면 함침 개선에 관한 연구 (A study on the improvement of impregnation on the surface of injection-molded thermoplastic woven carbon fabric composite)

  • 정의철;윤경환;이성희
    • Design & Manufacturing
    • /
    • 제15권3호
    • /
    • pp.39-44
    • /
    • 2021
  • In molding of continuous fiber-reinforced thermoplastic composites, it is very difficult to impregnate between the reinforcements and the matrix since the matrix has a high melting temperature and high viscosity. Therefore, most of composite molding processes are divided in the manufacturing processes of intermediate materials called prepreg and the forming of products from intermediate materials. The divided process requires additional facilities and thermoforming, and they increase the cycle time and cost of composite products. These problems can be resolved by combining the continuous fiber-reinforced composite molding process with injection molding. However, when a composite material is manufactured by inserting woven fabric into the injection mold, poor impregnation occurs on the surface of the molded product. It affects the properties of the composites. In this paper, through an impregnation experiment using cores with different heat transfer rates and pore densities, the reason for the poor impregnation was confirmed, and molding experiments were conducted to produce composite with improved surface impregnation by inserting the mesh. And also, the surface impregnation and deformation of composites molded using different types of mesh were compared with each other.

약용작물의 바이오소재 수요 분석 (Biomaterials Demand of Medicinal Crops)

  • 안병일;김용렬
    • 한국유기농업학회지
    • /
    • 제31권4호
    • /
    • pp.291-307
    • /
    • 2023
  • Medicinal crops are the most representative input among agricultural products for biomaterials. The actual situation of how medicinal crops are used as inputs in the downstream industry is analyzed, and the input demand function of medicinal crops is quantitatively estimated. The proportions of intermediate demand and final demand in the total production of medicinal crops were 52.1% and 47.9% in 1995, but changed to 74% and 26% in 2019, with the proportion of intermediate demand accounting for approximately increased by 3 times. Estimation results of the demand function for medicinal crops in the medicine industry show, a 1% increase in the production of medicine is found to increase the demand for medicinal crops by 0.3369%. If the production of health functional foods increase by 1%, the demand for medicinal crops is expected to increase by 0.6221%. It is also found that a 1% increase in the amount of cosmetic production would increase in the demand for medicinal crops by 0.3932%. This indicates that market expansion in downstream industries can have a significant impact on agricultural products for biomaterials.

Formation of Pyro-products by the Pyrolysis of Monobromophenols

  • Na, Yun-Cheol;Seo, Jung-Ju;Hong, Jong-Ki
    • Bulletin of the Korean Chemical Society
    • /
    • 제24권9호
    • /
    • pp.1276-1280
    • /
    • 2003
  • Thermal behavior of bromphenols was investigated by direct pyrolysis at high temperature. The thermal degradation products formed by the pyrolysis of mono-bromophenols (o-, m-, and p-) were identified by gas chromatography-mass spectrometry. During the pyrolysis reactions, several kinds of dioxins and furans were produced, and the relative ratio of pyro-products was dependent on the substituted position of bromine in phenolic structure due to the effect of symmetry and steric hindrance. The formation of dioxins can be explained by the phenoxy radical addition and Br atom elimination at an ortho-carbon site on phenolic structure. On the other hand, the formation of furans can be explained by the ortho-ortho carbon coupling of phenoxy radicals at unsubstituted sites to form o, o'-dihydroxydiphenyl intermediate via its keto-tautomer, followed by $H_2O$ elimination. The pyrolysis temperature has also a substantial effect on the dimerized products quantities but little effect on the type of pyro-products. Moreover, the formation mechanism of pyro-products was suggested on the basis of products identified.

연화제 첨가가 우렁이 중간수분식품의 품질 특성에 미치는 영향 (Effect of the Addition of Tenderizers on Quality Characteristics of Intermediate Moisture-apple snail(Cipangopaludin chinensis malleasta) Products)

  • 양한술;천지연;김병철;강성원;정창호;허호진;조성환;최성길
    • 한국식품저장유통학회지
    • /
    • 제14권3호
    • /
    • pp.288-293
    • /
    • 2007
  • 본 실험에서는 기능성이 풍부한 우렁이를 가공하여 중간 수분식품으로 개발하기 위하여 일반적인 건조제품의 특성인 단단한 조직감을 개선하고자 먼저 우렁이를 천연조직 연화제들을 첨가한 침지액에 침지한 후 냉풍건조를 이용해 반건조 우렁이를 제조하고 이들의 특성을 조사하였다. Glycerol을 연화제로 첨가한 경우 전단력의 감소와 더불어 수분함량 및 수분활성도의 감소 효과를 가져 올 수 있었던 반면, 키위나 파인애플을 첨가한 경우는 전단력은 감소한 반면 수분함량과 수분활성도는 증가하는 것을 확인하였다. SDS-PAGE 분석 결과, 키위나 파인애플의 단백질 분해효소들이 근원섬유단백질 구조를 붕괴시킴으로 결과적으로 전단력이 낮아지는 결과를 가져왔음을 확인하였다. 기호도면에서는 glycerol의 경우 첨가하지 않은 것보다 다소 향상되었으나 키위나 파인애플에 비하여 그 영향이 크지 않은 것으로 나타났다. 키위와 파인애플의 경우는 과일이 지니는 독특한 맛과 향이 전반적인 제품의 풍미에 크게 영향을 주는 것으로 판단되며 이들이 함유하는 효소에 의한 근원단백질 붕괴에 의한 조직감 향상은 이들 연화제가 가지는 또 다른 이점이라 할 수 있겠다. 우렁이를 이용한 중간수분 식품 제조시 파인애플을 5%수준으로 사용하는 경우 상당한 기호도를 가지는 제품을 제조할 수 있는 가능성을 확인하였으며, 중간수분식품의 일반적 특성인 단단한 조직감도 효과적으로 개선할 수 있음을 보여주었다.

우렁이 생체 및 가공제품의 저장안정성 조사 (Preservative Safety Analysis of the Fresh Apple Snails and their Processing Products)

  • 오병태;강성원;최성길;허호진;조성환
    • 한국식품저장유통학회지
    • /
    • 제15권3호
    • /
    • pp.340-346
    • /
    • 2008
  • 저장안정성을 검토하여 품질개선방안을 확립하고자, 우렁이 생체 및 반건조 우렁이 제품을 저장하는 기간중, 처리조건별 미생물의 경시적 변화와 관능검사를 실시하였다. 우렁이의 초기 총균수(${\log}_{10}\;CFU/g$)는 5.6으로 나타나 식품가공과 유통을 위해서는 살균처리가 필수적이라고 판단되었다. 염침지농도, 건조온도, 건조시간에 따라 우렁이 생체의 조직감, 수분활성도, 건조 특성에 영향을 크게 미치기 때문에 가공 시에 약 10%의 염농도를 가진 침지액에 침지한 후 냉풍 건조하여 처리하여 저장성이 뛰어난 반건조제품을 제조하였다. 천연 보존제 및 연화제를 첨가하여 진공 포장하여 미생물 검사를 한 결과, 총균수는 거의 나타나지 않았으며 대장균, 효모 및 곰팡이, 호염성 미생물은 검출되지 않았으므로, 가공처리 후 필수적으로 진공 포장을 실시해야 하는 것으로 나타났으며, 천연 식품첨가물의 첨가시 우렁이 중간수분식품의 품질이 크게 향상되었기 때문에, 가공시에는 파인애플 착즙액을 원료 대비 5% 첨가하여 좋은 결과를 얻었다. 본 연구결과 개발된 우렁이 가공품은 우렁이가 함유한 여러 생리활성기능(항산화, 항염 및 간기능 개선)의 건강식품 이미지를 살리면서 우렁이를 주원료로 한 반건조 제품, 통조림, 건강음료, 분말 등 가공품의 품질특성을 부여된 가공제품을 생산할 수 있을 것이다.

ICT 산업이 생산 및 경제성장에 미치는 영향 - 4차 산업혁명 관련 산업을 중심으로 (The Impact of ICT Sector on Economic Output and Growth)

  • 이명수;남수중
    • 정보화정책
    • /
    • 제26권2호
    • /
    • pp.24-45
    • /
    • 2019
  • 본고는 정보통신기술(ICT) 산업을 ICT 생산 산업과 ICT 이용 산업으로 구분하고 각 산업의 경제성장 기여도를 추정하였다. 이를 통해 ICT 생산 산업이 전체 경제성장에 미치는 직 간접적인 영향의 크기를 분석하였다. 한편, 이러한 산업별 성장기여도 분석은 각 산업이 전체 경제성장에서 차지하는 비중의 크기를 사후적으로 보여줄 수는 있어도, 특정 산업이 전체 경제에 영향을 미치는 파급 원인 및 그 과정에 대하여는 파악할 수 없다는 단점이 있다. 이러한 단점을 극복하고자 본고는 ICT 생산 산업 재화의 가격변화에 초점을 두고 ICT 생산 산업 재화의 상대가격, ICT 이용 산업에 투입되는 ICT 생산 재화의 비중, 경제 전체의 생산 간에 장기적으로 안정적인 관계가 존재하는지 여부를 실증분석 하였다. 분석 결과 경제 전체의 성장은 지속적으로 둔화되고 있으나 ICT 관련한 산업의 전체 경제 성장에 기여하는 정도가 꾸준히 증가한 것으로 나타났다. 특히, ICT 생산 산업이 전체 경제성장에 직접 기여한 것 보다는 ICT 이용 산업을 통해 간접적으로 기여한 효과가 더 큰 것으로 나타났다. 한편, ICT 생산 산업 재화의 상대가격과 ICT 이용 산업에 투입되는 ICT 생산 재화의 비중 간에 장기적으로 안정적인 부(-)의 관계가 있는 것으로 나타났다. 또한 ICT 생산 산업 재화의 상대가격 하락이 ICT 이용 산업에 투입되는 ICT 생산 재화의 비중을 증가시키고 이를 통해 경제 전체의 생산도 증대시키는 것으로 나타났다. 이는 ICT 생산 산업의 가격하락이 여타 산업의 생산효율을 증가시켜 경제전체의 성장에 직 간접적으로 영향을 주는 것으로 해석될 수 있다.

전라남도(全羅南道) 해남층군(海南層群) 우항리층(牛項里層)에 흡재(夾在)된 흑색(黑色)셰일의 유기지구화학적(有機地球化學的) 연구(硏究) (Organic Geochemical Study on the Black Shales in U-hang-ri Formation, Hae-nam Group, Jeolla Nam-do, Korea)

  • 이대성;시마다 이쿠로;하야시다 노부오
    • 자원환경지질
    • /
    • 제9권3호
    • /
    • pp.157-163
    • /
    • 1976
  • In this study, the oil bearing rock-sequence, U-hand-ri Formation (D.S. Lee et al., 1976), was subdivided into three members; the lower, the intermediate and the upper. The lower consists mainly of reddish purple tuff and sandy calcareous shales, the intermediate of an alternation of tuffs, sandstons, calcareous black shales, cherts and limestone and the upper of coarse grained variegated tuff and agglomerate. Oily matter was found from the black shales of the intermediate. Ten samples of black shales from drilled cores, 8 samples of black shales from different outcrops of the member, and 1 sample of grease-like seeping oil from black shales at U-hang-ri coast were chemically analyized. Among them, 9 samples contain remarkable amount of organic carbon (0.96~1.60%) and E.O.M. extract (0.176~0.718%), and mostly the bituminous material is saturated hydrocarbons as well as shown in infared spectroscopic analyses. The elemental analyses of MAE extracts and asphaltenes of some of thoese samples indicate that the transformation of organic material to crude oil is highly progressed. The authors suggest that the seeping oil and oily tinges in black shale layers are the products of natural cracking related with the igneous activities in the area nearby.

  • PDF