• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.150-150
• /
• 2008

고효율 LED를 얻기 위해서는 LED의 내부 양자효율과 외부 양자효율이 높아야 한다. 현재 GaN-Based LED의 내부 양자효율은 결정의 질의 개선 및 이중이종접합 또는 다중양자우물 구조와 같이 활성층의 캐리어 농도를 높이는 접합구조로 설계되어 거의 100%에 가까워졌다. 그러나 외부 양자효율은 반도체 재료의 높은 굴절률로 인하여 외부로 탈출하지 못하고 내부로 전반사 되어 반도체 내부에 갇히게 되는데 이처럼 갇힌 빛은 반도체와 중간 Interface에 TIR(total internal reflection) 또는 반사판에 의해 계속적으로 반사 된다. 그러므로 이를 해결하기 위한 플립칩 구조, 포토닉 크리스탈 등의 여러 가지 방법들이 제시되고 있지만 아직도 더 높은 외부 양자 효율의 개선을 요구하고 있다. 본 연구에서는 새로운 형태의 반사판(Al) 즉 p-GaN과 반사판 사이의 interlayer로 반사판과의 오믹 접촉을 고려한 Embo type의 NiO를 구현하여 반사된 빛의 방향을 내부반사를 줄일 수 있는 방향으로 변화시킴으로써 광 추출 효율의 향상을 기대할 수 있게 되었다.

• Steel and Composite Structures
• /
• 제4권6호
• /
• pp.489-507
• /
• 2004

The flexibility of the connection between steel and concrete largely influences the global behaviour of the composite beam. Therefore the way the connection is modelled is the key issue in its structural analysis. Here we present a new strain-based finite element formulation in which we consider non-linear material and contact models. The computational efficiency and accuracy of the formulation is proved with the comparison of our numerical results with the experimental results of Abdel Aziz (1986) obtained in a full-scale laboratory test. The shear connectors are assumed to follow a non-linear load-slip relationship proposed by Ollgaard et al. (1971). We introduce the notion of the generalized slip, which offers a better physical interpretation of the behaviour of the contact and gives an additional material slip parameter. An excellent agreement of experimental and numerical results is obtained, using only a few finite elements. This demonstrates that the present numerical approach is appropriate for the evaluation of behaviour of planar composite beams and perfect for practical calculations.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.99-102
• /
• 2000

Via for achieving reliable fabrication of MCM-D substrate was formed on the photosensitive BCB layer. MCM-D substrate consists of photosensitive BCB(Benzocyclobutene) interlayer dielectric and copper conductors. In order to form the vias in photosensitive BCB layer, the process of BCB and plasme etch using $C_2$F$_{6}$ gas were evaluated. The thickness of BCB after soft bake was shrunk down to 60% of the original. AES analysis was done on two vias, one is etched in $C_2$F$_{6}$ gas and the other is non etched. On via etched in $C_2$F$_{6}$, native C was detected and the amount of native C was reduced after Ar sputter. On via non etched in $C_2$F$_{6}$, organic C was detected and amount of organic C was reduced a little after Ar sputter. As a result of AES, BCB residue was not removed by Ar sputter, so plasma etch is necessary for achieving reliable via.ble via.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.73-76
• /
• 2001

We deposited epitaxial $Ba_{0.6}$S $r_{0.4}$Ti $O_3$(BST) films having thickness of 400 nm on MgO(001) substrates, where a 10 nm thick $Ba_{1-x}$S $r_{x}$Ti $O_3$(x=0.1-0.7) interlayer was inserted between BST and MgO to manipulate the stress of the BST films. Since the main difference of those epitaxial BST films was the lattice constant of the interlayers, we were very successful in controlling the stress of the BST films. BST films under small tensile stress showed larger dielectric constant than that without stress as well as those under compressive stress. Stress relaxation was investigated using epitaxial BST films with various thicknesses grown on different interlayers. For BST films grown on $Ba_{0.7}$S $r_{0.3}$Ti $O_3$ interlayers, the critical thickness was about 600 nm. On the other hand, the critical thickness of single-layer BST film was less than 100 nm.00 nm.m.m.m.

• 한국전기전자재료학회논문지
• /
• 제15권5호
• /
• pp.393-397
• /
• 2002

Polyimide (PI) films have been studied widely as the interlayer dielectric materials due to a low dielectric constant, low water absorption, high gap-fill and planarization capability. The polyimide film was etched using inductively coupled plasma system. The etcying characteristics such as etch rate and selectivity were evaluated at different $CF_4/(CF_4+O_2)$chemistry. The maximum etch rate was 8300 ${\AA}/min$ and the selectivity of polyimide to SiO$_2$was 5.9 at $CF_4/(CF_4+O_2)$ of 0.2. Etch profile of polyimide film with an aluminum pattern was measured by a scanning electron microscopy. The vertical profile was approximately $90^{\circ}$ at $CF_4/(CF_4+O_2)$ of 0.2. As 20% $CF_4$ were added into $O_2$ plasma from the results of the optical emission spectroscopy, the radical densities of fluorine and oxygen increased with increasing $CF_4$ concentration in $CF_4/O_2$ from 0 to 20%, resulting in the increased etch rate. The surface reaction of etched PI films was investigated using x-ray photoelectron spectroscopy.

• 한국전기전자재료학회논문지
• /
• 제16권5호
• /
• pp.390-396
• /
• 2003

As the design rule of device continued to shrink, the contact resistance in small contact size became important. Although the conventional TiN/Ti structure as a ohmic layer has been widely used, we propose a new TiN/Co film structure. We characterized a contact resistance by using a chain pattern and a KELVIN pattern, and a leakage current determined by current-voltage measurements. Moreover, the microstructure of TiN/ Ti/ silicide/n$\^$+/ contact was investigated by a cross-sectional transmission electron microscope (TEM). The contact resistance by the Co ohmic layer showed the decrease of 26 % compared to that of a Ti ohmic layer in the chain resistance, and 50 ％ in KELYIN resistance, respectively. A Co ohmic layer shows enough ohmic behaviors comparable to the Ti ohmic layer, while higher leakage currents in wide area pattern than Ti ohmic layer. We confirmed that an uniform silicide thickness and a good interface roughness were able to be achieved in a CoSi$_2$ Process formed on a n$\^$+/ silicon junction from TEM images.

• 한국전기전자재료학회논문지
• /
• 제17권11호
• /
• pp.1149-1155
• /
• 2004

In this paper, novel methods for improvement of thermal stability of Ni-germano Silicide were proposed for nano CMOS applications. It was shown that there happened agglomeration and abnormal oxidation in case of Ni-germano Silicide using Ni only structure. Therefore, 4 kinds of tri-layer structure, such as, Ti/Ni/TiN, Ni/Ti/TiN, Co/Ni/TiN and Ni/Co/TiN were proposed utilizing Co and Ti interlayer to improve thermal stability of Ni-germano Silicide. Ti/Ni/TiN structure showed the best improvement of thermal stability and suppression of abnormal oxidation although all kinds of structures showed improvement of sheet resistance. That is, Ti/Ni/TiN structure showed only 11 ohm/sq. in spite of 600 $^{\circ}C$, 30 min post silicidation annealing while Ni-only structure show 42 ohm/sq. Therefore, Ti/Ni/TiN structure is highly promising for nano-scale CMOS technology.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.205-206
• /
• 2022

This study intends to conduct tests on subsidence and drying shrinkage by mixing CaO-CSA expansion materials to ensure the stability of CLC, and to understand its properties. Based on CLC of 0.6, the replacement ratio of CaO-CSA expansion material was conducted at five levels compared to blast furnace slag, and the results are as follows. The replacement of CaO-CSA expansion material at an appropriate level produces ethringhite and potassium hydroxide, and it is believed that the internal voids of CLC and the Tobelmorite interlayer structure are charged to increase the structural stability, leading to an increase in compressive strength and a decrease in the drying shrinkage. However, it is judged that tissue relaxation due to excessive substances in the high replacement ratio affects the stability of CLC. In the future, we will conduct additional experiments on density, absorption rate, flow test, and settlement, and evaluate and analyze the stability of CLC by selecting the optimal replacement ratio of CaO-CSA expansion materials.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.101.1-101.1
• /
• 2016

Van der Waals (vdW) heterostructures built from two-dimensional layered materials provide an unprecedented opportunity in designing new material systems because the lack of dangling bonds on the vdW surfaces enables the creation of high-quality heterointerfaces without the constraint of atomically precise commensurability. In particular, the ability to build artificial heterostructures, combined with the recent advent of transition metal dichalcogenides, allows the fabrication of unique semiconductor heterostructures in an ultimate thickness limit for fundamental studies as well as novel device applications. In this talk, we will present the characterization of the electronic and optoelectronic properties of atomically thin p-n junctions consisting of vertically stacked WSe2 and MoS2 monolayers. We observed gate-tunable diode-like current rectification and a photovoltaic response across the p-n interface. Unlike conventional bulk p-n junctions, the tunneling-assisted interlayer recombination of the majority carriers is responsible for the tenability of the charge transport and the photovoltaic response. Furthermore, we will discuss the enhanced optoelectronic characteristics in graphene-sandwiched vdW p-n junctions.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2002년도 봄 학술발표회 논문집
• /
• pp.5-8
• /
• 2002

Poly(p-xylylene) (PPX) is most easily prepared by a vapor deposition polymerization (VDP) of [2, 2]paracychophane, as described by Gorham.$^1$ Poly(tetrafluoro-p-xylylene) (F-PPX) is of interest in view of its potential applications as an interlayer dielectric material in high-speed integrated circuits, since it has an extremely low dielectric constant (〈2.35).$^2$ (omitted)