• Transactions of Materials Processing
• /
• v.14 no.5 s.77
• /
• pp.452-459
• /
• 2005

Gas assisted injection molding (GAIM) is an innovative low-pressure injection molding technique that can provide numerous benefits such as reduced part warpage, excellent surface quality without sink marks, low injection pressure and greater design flexibility. However, adoptions of GAIM may cause unexpected defects since it requires many subtle design factors such as resin shot size, delay time and gas injection pressure, which wouldn't be considered in conventional injection molding process. Therefore, experiences applying GAIM should be collected and examined in order to establish design rules of the new technique. The purpose of this paper is to summarize developing cases of three automotive interior parts such as instrument panel, map pocket folding and center facia side panel so that possibilities and limitations of GAIM were examined. As a result, it is necessary to consider characteristics of GAIM at the initial stage of part design in order to obtain various advantages of the GAIM process without occurring severe defects, which would increase time and cost required to the part development.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.2
• /
• pp.276-280
• /
• 2008

The design technology to be developed in this study is technology related to the metal panel comer processing method of very high value-added, interior and exterior cladding material, in the architecture. This study is aimed at designing a Bending Die System that enables metal panel comer processing for the first time in Korea, by improving corrosion resistance (durability), weather resistance and elegances (design) for the connecting part of right angle cornering, where most serious problems occur in using metal steel plates of 2.5mm or thicker. This is used as a kind of metal ball and as architectural interior and exterior cladding material.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1518-1522
• /
• 2008

The design technology to be developed in this study is technology related to the metal panel corner processing method of very high value-added, interior and exterior cladding material, in the architecture. This study is aimed at designing a Bending Die System that enables metal panel corner processing for the first time in Korea, by improving corrosion resistance (durability), weather resistance and elegances (design) for the connecting part of right angle cornering, where most serious problems occur in using metal steel plates of 2.5mm or thicker. This is used as a kind of metal ball and as architectural interior and exterior cladding material.

• Journal of the Korea Furniture Society
• /
• v.19 no.1
• /
• pp.22-32
• /
• 2008

Revolution of software and hardware technology changed TV from cathode-ray tube to a LCD or PDP. And this change calls for change of TV decoration cabinet. The flat panel TV stands market is very a world-wide enormous size with the function which is various and breed and design is forming. Nonetheless, Our flat panel TV stands production method and technique is to a phase which imitates the product of the foreign nation which precedes. Currently our country TV / AV decoration cabinet is staying to only the acceptance function which is simple. Consequently, the development of the new flat panel TV stands that matches in the house culture which is modernized with applies the visual effect which is various, effective design and function is necessary. The fact that it develops the product which equips the function characteristic which is new and convenient is objective of sample planning.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 1999.04a
• /
• pp.53-56
• /
• 1999

The purpose of this study was to diagnose the characteristics of current use of kitchen and scrutinize what to improve for the future kitchen development. To achieve the purpose, the small group wordshop panel was used. Two groups of 5 housewives per each were employed. For each group, there were a total of 3 consecutive meetings including 2 workshops and 1 field survey in each subject's house. The contents dealt with in the panel were as follows. First, actual condition and problems of using kitchen; second , possible solutions of the problems; third, needs for developing future kitchen. The major results were first, consumers require bigger kitchens to accomodate a variety of family activities ; second, kitchen needed to be more open encouraging family interaction and gave organic relationship to adjacent such as living room and utility room; third, due to korean cooking style, poor ventilation along with wet trash disposal was a serious problem. In addition to these. there revealed many problems which need to be improved and valuable ideas for the improvement.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.387-392
• /
• 2003

This study is put a focus on the identification of sound characteristics according to the interior configuration of sound absorption material and air gap. Noise barrier is general consists of front perforated panel, air layer, sound absorption material, air gap and back plate. Noise barrier is required to the NRC value of 0.7. The absorbing performance of the noise barrier relies on the opening ratio of the perforated panel and the efficiency of the absorbing material. This study has observed the effect of opening ratio and hole size, the increase of sound absorbing performance by the configurations of sound absorption material and air gap. New designed noise barrier is achieved the acoustical performance of 0.87 the measurement in a reveration room.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.13 no.2
• /
• pp.29-36
• /
• 2009

The present study emphasizes a nonlinear model to predict the shear behaviour of reinforced concrete interior beam-column joints. To model the shear behaviour of a panel zone in the beam-column joint, a modified softened truss model theory for in-plane shear prediction was introduced. This relationship was changed to define the characteristics for the rotational spring to represent the shear deformation in the joint by an equivalent moment-rotation relationship from the joint equilibrium. The analysis model was compared with experiments on reinforced concrete interior beam-column joints that were subjected to axial and shear forces, and the current model was found to accurately predict not only the shear force but also the shear deformation in the joint.

• Korean Institute of Interior Design Journal
• /
• v.19 no.5
• /
• pp.105-112
• /
• 2010

The purpose of this study is to suggest the color scheme based on the color image types through the color analysis of workstation furniture which is on the market. This color scheme of the workstation furniture is expected to be give the comfort to office environment when planning office. For this study, It is selected the three furniture firms that have a brand of office furniture and their web site that is showed color sample of furniture. The following researches are drawn based upon the purpose. First, the color image types of interior space is classified and the color image words that are suitable for each types is extracted based on the results of existing literature. Second, the distribution of its hue and tone is analysed after collecting the each firm's color sample of desk top, panel and chair. Third, the color image appearing in each furniture color is analysed by color image scale positioning. Forth, the color scheme of desk top, panel and chair is suggested by its color scheme palette. The result of this study is expected to help comfortable environment by providing the color scheme for selection of furniture color in work space. Not all color of each furniture is sufficient to be combined color scheme, the result is indicated that the color scheme of workstation by color image types is possible for color planning in office environment.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.13 no.4
• /
• pp.25-32
• /
• 2013

The green building is one of biggest factors to go the goal of energy saving and environmental conservation, reduction of energy consumption, friendly energy technology, recycling of resource, and environmental pollution reduction technology. The purpose of these green buildings realized by the energy-saving technology such as the exterior materials or curtain wall system. The curtain wall system is a element that come to insulated portions of building envelope that results in heat loss. The purpose of this paper is to carried out mock-up tests for exterior wall used in autoclaved lightweight concrete panels in green building practices. Mock-up test execute a mixed process between standard test procedure and complex test procedure based on AAMA 501(American Society for Testing and Materials) and ASTM 283, ASTM 330(American Society for Testing and Materials). In results, tests meet the requirements that grant values in steps of procedures provided on ASTM and AAMA. ALC panel is suitable for a exterior wall product to be gratified thermal cycling performance and structural capacity, deflection(H/200) and lateral displacement(H/50), for curtain walls.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.12 no.3
• /
• pp.59-66
• /
• 2012

Autoclaved Lightweight Concrete(ALC) features such as a high performance insulation, the fire resistance, the advantage of easy handing construction, and lightweight panels applied the curtain wall system. ALC materials are certified as non-toxic environmental and eco-friendly productions. But ALC external panels mixed with blast furnace slag pounder and silica fume have to be coated with a stucco compound or plaster because of resisting the ambient environment. This study is that mixing tests to evaluate a performance analysis of exterior paints to be make-up pigments(organic or inorganic) coated with panel surface. Testing compared by KS F 2476; flow test, KS F 2426; compression strength test, KS F 2762; bond strength test. In results, the case of the inorganic binder, ratio of alumina cement : anhydrite is 90:10 to 80:20 at the highest level of intensity. In the case of the organic binder, adhesive strength rating at surface of ALC, the pullout strength is below 0.5 $N/mm^2$ but the normal concrete is over 2.0$N/mm^2$. A contents ratio of EVA resin is more than 3% and then bond strength is effectively.