• Composites Research
• /
• 제12권1호
• /
• pp.28-36
• /
• 1999

본 연구에서는 얇은 탄소섬유/에폭시 복합적층판(두께 1mm)의 냉각열응력으로 인한 자유경계단 근처의 파손을 유한요소 수치해석과 초음파 C-scan, 광학 및 전자현미경 관찰을 통하여 검토하였다. 수치해석 결과, 복합적층판의 자유단 근처의 내부층에서 층냄 및 층간응력이 크게 나타났다. 액체질소에 의한 저온담금질 실험결과, 적층강도가 $[0_2/90_2]_s,\;[45_2/-45_0]_s,\;[0_2/60_2]_s$인 적층판의 층간근처의 내부층 쪽에서만 모재 및 계면부에서 진전하는 층내균열이 발생하였다. 이들 결과는 위의 수치해석 결과와 일치했다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.925-926
• /
• 2006

This paper presents a sensorless speed control of an interior permanent magnet synchronous motor using an adaptive integral binary observer and fuzzy logic controller. In view of composition with a main loop regulator and an auxiliary loop regulator, the binary observer has a property of the chattering alleviation in the constant boundary layer. However, the steady state estimation accuracy and robustness are dependent upon the width of the constant boundary. In order to improve the steady state performance of the binary observer, the binary observer is formed by adding extra integral dynamics to the switching hyperplane equation. Also, because the conventional fixed gain PI controller are very sensitive to step change of command speed, parameter variations and load disturbance, the fuzzy logic controller is used to compensate a fixed gain PI controller. Therefore, a gain PI is fixed and the IPMSM is drived at another speed region. The effectiveness of the proposed the adaptive integral observer and the fuzzy logic controller are confirmed by experimental results.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2008년도 춘계학술발표대회 논문집
• /
• pp.50-53
• /
• 2008

Recently as the efficiency of meal area in the neighborhood facilities has decreased, the user is not satisfied about the existing meal area quality. There are problems due to crucial administration due to ineffective use of the meal area and the in-charge. So, a new meal system is coming up with one meal form at one place with time wise classification to satisfy the users and owner. In this plan, the meal area at basement 1 of Korea Advertisement Culture Hall is not just the existing meal area but in day it is a restaurant, at night a vacant hall and in the weekend it is a banquet hall. Such a premium meal area designed by developing the meal area that has different usage as per time slot is named as "M-KITCHEN" and we intend to plan in such a way. The complete "M-KITCHEN"consists largely of entrance/ exit, food distribution area, eating area, specialized restaurant, rest area, kitchen, warehouse etc. This area consists again of multimedia street entrance "M-street", food distribution area "M-kitchen", meal area "M-place", "M-plaza", "Wall pond", "Layer deck", specialized restaurant "M-china", "M-shushi", rest area "Gardening".

• 한국실내디자인학회논문집
• /
• 제25권3호
• /
• pp.82-89
• /
• 2016

This study investigated the preservation status of wooden architectural heritages, designated as Chungcheongbuk-do designated heritage in Jecheon. The purpose of this paper is to find the damage cause and the preservation method of wooden architectural heritages. It was conducted using the research methods of the existing literature and field survey to compare a current status of wooden architectural heritages. The result are as followings. Firstly, it was found the problems of a break, a damage, etc. in the platform and the problems of a cracking, an exfoliation, a corrosion, a warp, etc. in the wall. And, it was found a cracking of the beam(梁) and a roof tile(瓦), a falling of Angto(仰土), a sagging roof, etc. in the roof. Secondly, the damage causes of wooden architectural heritages were mostly caused by the physical limitations of the materials. And, it was caused by a rainwater, a subsidence of ground settlement, a destruction of waterproof membrane, etc. Lastly, the repair methods are making a quicklime layer in the soil mound on a cracking and an exfoliation part, a resin treatment or strut operation on a corrosion part of column, etc.

• Journal of the Korean Wood Science and Technology
• /
• 제44권2호
• /
• pp.264-273
• /
• 2016

The insulation of a building envelope influences the hygrothermal performance as well as the thermal performance of the building. While most of Korean wood frame houses have an interior insulation system, the exterior insulation system with high thermal performance has recently been applied. While it can be effective in energy savings for better insulation performance, without consideration of the moisture, condensation and mould growth can occur. Therefore, in this study, hygrothermal behaviour, water content, and mould growth were analyzed using hygrothermal simulation of an exterior wall of a wood frame house with which the interior insulation and exterior insulation systems were applied. The wall layer included Wall A (Interior insulation) and Wall B (Exterior insulation). The U-values were identified as 0.173 and $0.157W/m^2K$, respectively. The total water content and OSB absolute water content of Wall A were confirmed to be higher than those of Wall B, but the absolute water content did not exceed the reference value of 20%. The moisture content of the two walls was determined to be stable in the selected areas. However, mould growth risk analysis confirmed that both Wall A and Wall B were at risk of mould growth. It was confirmed that as the indoor setting temperature decreased, the mould index and growth rate in the same area increased. Therefore, the mould growth risk was affected more by indoor and outdoor climate conditions than by the position of the insulation. Consequently, the thermal performance of Wall B was superior to that of Wall A but the hygrothermal performances were confirmed to be similar.

• 한국정보과학회논문지:정보통신
• /
• 제29권5호
• /
• pp.524-532
• /
• 2002

인터넷이 급속하게 발달함에 따라 네트워크 사용자는 텍스트 기반의 서비스에서 멀티미디어 서비스 사용을 위한 고속의 네트워크를 요구하고 있다. 또한 네트워크 사용자는 인터넷 IP 주소 부족을 해결하기 위한 네트워크 변환 기술(NAT)이나 외부 망으로부터 내부 망을 보호하기 위한 방화벽(Firewall)과 같은 Layer 3에서의 라우팅 기술을 요구하고 있다. 그러나 현재 라우터 기반의 알고리즘에서는 멀티미디어 서비스를 지원하거나 사용자의 요구조건을 충족시키면서 혼잡상황 및 불공정성을 해결하기 위한 방법을 가지고 있지 않다. 본 논문에서는 Layer 3의 라우팅 기술인 네트워크 변환 기술을 이용하여 혼잡상황을 효과적으로 해결하는 MFRED(Multiple Fairness RED) 알고리즘을 제안하였다. MFRED 알고리즘은 비반응 플로우(unresponsive flow)와 TCP와 같은 플로우(TCP-like flow) 사이에 불공정성 문제를 해결하였다. 그리고, 이 알고리즘은 혼잡 상황에 덜 민감하고 혼잡 상황의 원인이 되는 플로우로부터 혼잡상황에 민감한 플로우를 공정하게 잘 보호하도록 동작한다.

• 한국조경학회지
• /
• 제33권2호
• /
• pp.16-31
• /
• 2005

This study was carried out to design a bridge-type ecological corridor plan in a forested neighborhood park affected by road construction in Dongjak-gu, Seoul. In order to study the site conditions, we analyzed topography, ecosystem structure, and user behavior and trail use. Existing vegetation was classified into 12 types. Based on a vegetation analysis, the Populus albaglandulosa and Robinia pseudoacacia communities, where planted species are dominant, were distributed extensively in the southern forest area. Planted areas with a single-layer structure of Korean landscape woody plants and Robinia pseudoacacia communities with a single-layer structure were distributed extensively in the northern forest and water-supply area. Based on a study of 28 quadrats, the similarity index between the multi-layer plant communities distributed in the southern forest and the single-layer planted areas was low. Twenty-four species of wild birds(355 individuals) were found in the survey area, including nine interior species and three urban species. The study of user behavior and numbers showed most users were walkers and few users were observed in the southern forest while most users were observed in the northern forest and water supply area. We selected some wild birds as model species to represent migrating species believed to use this park as an ecological corridor during migration. We suggested the new park plan include the following: improvement of vegetation structure for wildbird migration and habitat, connection of park trails for users and presentation of a landscape linked to nature.

• 한국전기전자재료학회논문지
• /
• 제18권2호
• /
• pp.125-129
• /
• 2005

Two kinds of physical treatments were examined for the analysis both of intrinsic surface and interior nature of CuInS $e_2$[CIS] and CuGaS $e_2$[CGS] films grown in separated systems. For the first method, a selenium protection layer which was immediately deposited after the growth of the CIS was investigated. The Se cap layer protects CISe surface from oxidation and contamination during the transport under ambient atmosphere. The Se cap was removed by thermal annealing at temperature above 15$0^{\circ}C$. After the decapping treatment at 2$25^{\circ}C$ for 60 min, ultraviolet photoemission and inverse photoemission measurements of the CIS film showed that its valence band maximum(VBM) and conduction band minimum (CBM) are located at 0.58 eV below and 0.52 eV above the Fermi level $E_{F}$, respectively. For the second treatment, an Ar ion beam etching was exploited. The etching with ion kinetic energy $E_{k}$ above 500 eV resulted in broadening of photoemission spectra of core signals and occasional development of metallic feature around $E_{F}$. These degradations were successfully suppressed by decreasing $E_{k}$ below 400 eV. CGS films etched with the beam of $E_{k}$ = 400 eV showed a band gap of 1.7 eV where $E_{F}$ was almost centered.st centered.

• Composites Research
• /
• 제17권5호
• /
• pp.15-24
• /
• 2004

유리 섬유 강화 플라스틱 직교적층판의 내부층과 표피층의 길이방향 변형률을 삽입된 절대변형 외부 페브리 페로 간섭 센서를 이용하여 측정하였다. 투과식 광학현미경을 이용하여 삽입된 A-EFPI 센서 주위의 파손거동을 관찰하였다. 시험편 표면부의 변형률 측정을 위해 포일 형식의 스트레인 게이지를 시험편 아래 위 표면부에 부착하였다. 또한 삽입된 A-EFPI 센서로 측정한 내부층과 표피층의 길이방향 변형률 값은 스트레인 게이지로 측정한 시험편 표면의 변형률 값 보다 다소 크게 나타났다. 균일 응력 모델을 기초로 한 3차원 유한요소해석을 통해 실험 결과의 타당성을 확인하였으며 내부층의 큰 변형률은 많은 횡단형 균열의 발생을 야기시켰는데 이로 인해 내부층에 삽입된 광섬유센서의 고장시 변형률이 급격히 낮아졌다.

• 한국해양학회지:바다
• /
• 제3권2호
• /
• pp.53-58
• /
• 1998

거친 바닥을 포함하고 있는 laminar 에크만층 내 흐름의 방향변화를 파악하기 위하여 바닥경계조건을 Taylor 급수로 전개하여 에크만방정식의 해를 구하였다. 이때 거친 바닥의 거칠기 정도를 나타내는 변수 h/${\delta}_E$(h, 거칠기의 rms 높이; ${\delta}_E$, 에크만층 두께)의 크기를 변화시켜 거칠기에 의한 에크만층 내 흐름의 방향변화(에크만 veering)를 구하였다. 거칠기 증가시 에크만층 내 일정 수심에서 변회각의 크기가 증가할 뿐만 아니라 이에 따른 cross-isobar 수송량은 도리어 감소함으로써, 결과적으로 내부의 지형류 속도가 감소함을 보여주고 있다. 이러한 이론적 결과를 증명하기 위해 회전반 실험을 실시하였고 관측된 결과는 이론적인 것과 잘 일치하고 있다.