• 한국측량학회지
• /
• 제26권4호
• /
• pp.351-357
• /
• 2008

항공용 Multi-looking 카메라는 1대의 사진기 몸체에 5대의 카메라를 설치하여 동시에 1장의 연직사진과 4개의 경사사진을 획득하므로, 연직방향으로 촬영된 일반 항공사진에 비해 현장에 대한 다양한 정보를 제공한다. 연직사진용 카메라에 대한 경사사진용 카메라의 기하학적 관계는6개의 외부표정요소에 의해 모델링 될 수 있으며, 그 기하학적 관계가 결정되면 경사사진에 대한 외부표정요소는 연직사진의 외부표정요소로부터 계산될 수 있다. Multi-looking 카메라에서의 연직카메라와 경사카메라의 상대적 외부표정요소를 검사하기 위하여, 실내 캘리브레이션 타깃을 설치한 후 하나의 비측정용 디지털카메라를 사용하여 세 지점에서 촬영방향 바꿔가며 14장의 사진을 취득하였다. 카메라 자체검정에 의해 카메라의 내부표정요소와 각 사진에 대한 외부표정요소가 추정되었고, 연직사진에 대한 경사사진의 상대적 외부표정요소가 각 사진에 대한 외부표정요소로부터 계산되었다. 상대적 외부표정요소 중 회전각과 투영중심점 위치에 대한 오차가 지상좌표 추정에 미치는 영향이 각각 분석되었다.

• 대한원격탐사학회지
• /
• 제24권3호
• /
• pp.223-233
• /
• 2008

In the mid 90's, the U.S. government released images acquired by the first generation of photo reconnaissance satellite missions between 1960 and 1972. The Declassified Intelligent Satellite Photographs (DISP) from the Corona mission are of high quality with an astounding ground resolution of about 2 m. The KH-4A panoramic camera system employed a scan angle of $70^{\circ}$ that produces film strips with a dimension of $55\;mm\;{\times}\;757\;mm$. Since GPS/INS did not exist at the time of data acquisition, the exterior orientation must be established in the traditional way by using control information and the interior orientation of the camera. Detailed information about the camera is not available, however. For reconstructing points in object space from DISP imagery to an accuracy that is comparable to high resolution (a few meters), a precise camera model is essential. This paper is concerned with the derivation of a rigorous mathematical model for the KH-4A/B panoramic camera. The proposed model is compared with generic sensor models, such as affine transformation and rational functions. The paper concludes with experimental results concerning the precision of reconstructed points in object space. The rigorous mathematical panoramic camera model for the KH-4A camera system is based on extended collinearity equations assuming that the satellite trajectory during one scan is smooth and the attitude remains unchanged. As a result, the collinearity equations express the perspective center as a function of the scan time. With the known satellite velocity this will translate into a shift along-track. Therefore, the exterior orientation contains seven parameters to be estimated. The reconstruction of object points can now be performed with the exterior orientation parameters, either by intersecting bundle rays with a known surface or by using the stereoscopic KH-4A arrangement with fore and aft cameras mounted an angle of $30^{\circ}$.

• 한국실내디자인학회논문집
• /
• 제21권5호
• /
• pp.272-279
• /
• 2012

Apartments with a southern exposure are often thought to have advantages in receiving winter sunlights and summer natural ventilation. However, as due-south-apartments increase recently, the consideration for residential environment for households with no southern exposure is necessary. In case of due-south-apartments, residents prefer east-sided apartments than west facing apartments which might receive more hot sunlight in the afternoon; however in case of west-oriented apartments with active ventilation, the interior area is bright until late afternoon without unpleasant heat and has advantage in light environment aspects. This study aims to compare and analyze merits and demerits of air flow and sunlighted environment of buildings through sunshine duration simulation using CFD simulation ad sunlights about southeast-sided and southwest-sided apartments based on general opinions for apartment directions. As results of the interior natural ventilation analysis, as the average air flow speed in southwest-sided apartments was 1m/s faster than that of southeast-sided, it has effects of lowering sensory temperature of residents in summer, and for sunlighted environment, southwest-sided apartments are advantageous for sunlighted area for duration time inside. As a result of the research, the calculation of physical residential environment of apartment residential space should be reached through integrated evaluation of natural ventilation and sunlighted time from placement and facing direction of the buildings considering characteristics and environment of each apartment, not based on general opinions.

• Spatial Information Research
• /
• 제10권3호
• /
• pp.407-419
• /
• 2002

본 연구에서는 레이져 매핑 시스템 구현을 위한 4S-Van 시스템의 설계에 대해 논하였다. 레이져 센서는 대상물의 3차원값을 기존의 사진측량에 비해 정확하고 빠르게 측정가능한 센서이다. 4S-Van 에 장착된 레이져의 광의 발사위치와 방향을 결정하기 위해 약결합 방식의 (D)GPS/INS 통합 알고리즘을 사용하였다. 레이져 매핑을 실현하기 위한 기초적이고 예비적인 실험으로서 현 시스템에 장착된 센서를 고려하여(D)GPS/INS 통합 알고리즘의 성능테스트와 장착된 CCD 카메라의 보정을 위해 근거리사진측량 기법중의 하나인 self-calibration 기법을 통해 외부표정요소와 내부표정요소를 획득하였다. 3대의 레이져 스케너를 동시에 작동시켜 데이터간의 상호보정을 통해 정밀도 향상을 시도하였다. 향후 레이져 데이터와 CCD 영상을 통해 확보된 질감 정보를 이용하여 컴퓨터 공간상에 지형지물에 대해 3차원 시각화 및 도시모델링 구축에 활용할 계획이다.

• 한국농공학회논문집
• /
• 제47권2호
• /
• pp.15-21
• /
• 2005

This study is to trace the change of stream shape using the past series of aerial photographs, and to compare the land use changes of riparian area along the stream. For the Gyeongan national stream, aerial photographs of 1966, 1981 and 2000 were selected and ortho-photographs were made with interior orientation and exterior orientation, respectively. Apparent changes of the stream were found that the consolidated reaches of stream by levee construction became straight together with widening of their stream widths. Especially the stream width of inlet part of Paldang lake widened almost twice because of the rise of water level by dam construction in 1974. The land use of riparian areas of three selected years were classified into six categories (water, forest, agricultural land, urban area, road, sandbar) by digitizing method. The forest and agricultural lands decreased and urban area increased as the stream maintenance had been performed.

• 소성∙가공
• /
• 제13권1호
• /
• pp.53-58
• /
• 2004

The microstructural changes of Al-Zn-Mg-Cu alloy containing Sc during hot extrusion and post heat treatment were investigated. Two kinds of Al-Sc alloys with different alloying elements (B1, B2) were hot extruded to make T-shape bars at extrusion temperature of $380^{\circ}C$, then the bars were solution treated at $480^{\circ}C$ for 2hrs followed by artificial aging at $120^{\circ}C$ for 24hrs. The interior microstructure of as extruded bar consisted of elongated grains, however, fine equiaxed grains were also observed around surface. The microstructural gradient suggested that different restoration process could proceed during the hot extrusion. For B1 and B2, different grain growth behaviors were found around the surface during the post heat treatment. Rapid grain growth behavior was observed for B1 around the surface, however, it was not observed for B2. Orientation pinning, which was related with the evolution of preferred orientation, and precipitation were thought to be responsible for the rapid grain growth.

• KIEAE Journal
• /
• 제11권5호
• /
• pp.137-143
• /
• 2011

An atrium space, unlike ordinary office rooms, accommodates variety of activities such as moving and resting of people and usually houses variety of vegitation to improve amenity and indoor environment. Many atrium buildings in Korea have been designed by considering the environmental criteria for human beings, not for the vegitation in the atrium space. Especially the daylighting designs are mostly focused on the required illuminances for various visual tasks of the occupants and glare controls. As a result, some atrium spaces do not provide sufficient light to the interior plants. Consequently, these atrium spaces require a high level of electric lighting to compensate the deficit of natural light for the photosynthesis of the vegitation. The purpose of this study was to suggest design guidelines for 4-sided atrium spaces having different well indices (WI), plan aspect ratio (PAR), and cardinal orientation. The findings from this study might be referenced by building designers when designing or selecting canopy systems by considering the daylight performances of the uncovered atrium spaces. In the study, the daylight performance was evaluated in terms of daylight autonomy (DA).

• 한국실내디자인학회논문집
• /
• 제25권4호
• /
• pp.3-12
• /
• 2016

The purpose of this study was to analyze City squares in Europe according to Biophilic Design elements to apply domestic Indoor Squares in Mixed-use building for relaxation. This study seeks to present a direction for designing an indoor square that uses the aspects of European city square. The following details consist the purpose of the study. First, Perspective from the Biophilic design and analyzing criteria of Europe city square. Second, European city square is analyzed to establish the criteria to be applied to indoor square. Third, based on European city square analysis, the planning direction for domestic indoor square is suggested. This result of paper proceeds as follows. First, it describes the analysis of the Indoor Squares of the domestic Mixed-use building. The results were derived of the fact that not applying the water elements and Facade greening. Second, In Europe Square, It is accounted for the highest proportion (33%) of the spaciousness. Third, Through a comparative analysis domestic indoor square was derived that the higher the need to improve the spaciousness and botanical motif. It is the ultimate goal of this study based on the analysis of the city square to set the criteria for the biophilic design of the indoor square to present the orientation of the indoor square.

• Composites Research
• /
• 제12권5호
• /
• pp.65-79
• /
• 1999

본 논문은 단순지지된 복합재료 사각판과 원통쉘이 결합된 구조물의 자유진동해석을 위한 해석적 방법에 대하여 기술하였다. 결합전 단순지시된 사각판과 원통쉘의 응답을 얻기 위하여 고전적 판이론과 Love의 얇은 쉘이론에 기초한 에너지법을 적용하였다. 결합구조물의 해석에는 동적응답법을 적용하였고, 길이방향 판과 쉘의 결합부에서의 동적 주기 하중과 모멘트는 Dirac 델타 함수와 정현 함수를 사용하였을 때 연속조건을 만족함을 보였다. 또한 원통쉘의 기하하적 매개변수인 쉘의 길이 대 반경비와 반경 대 두께비에 따른 진동특성의 변화를 고찰하였고, 복합재료의 섬유 방향각과 직교이방성 매개변수가 결합 원통쉘의 기본 진동수에 미치는 영향에 미치는 영향에 대하여 연구하였다.

• 한국실내디자인학회논문집
• /
• 제15권6호
• /
• pp.35-42
• /
• 2006

'Place' as the spacial concept became now key concept in the environments and architecture from the mid 20th century. The purpose of this study is to explain the placeness in Aldo Rossi's architecture according to space sequence. Aldo Rossi has attempted to apply the typological elements for the restoration of place in the cites and buildings which had ruined by modem architecture. Therefore It would be important for us to find out a method which making placeness in Aldo Rossi's architecture. Experiencing place could be examined by the method of space sequence. The experience of place is related to the experience of the human body in architecture space. The experience of place in space can make a unique placeness of architect. And, the experience of the place through the movement of the body and the vista, is the key elements of space sequence to explain the placeness in architecture. The results of this research are following. (1)Key space which related to movement of human body in Aldo Rossi's architecture make a set consisted of a goal space and the surrounding space. (2)The Arrange of Space and the formation of the boundary is more complex in the dispersed buildings than that of the single building. (3)The typological elements like a courtyard, a cylinder and the axis in the buildings made the goal space and helping people to find the orientation of human body.