• Journal of Ocean Engineering and Technology
• /
• v.26 no.3
• /
• pp.13-19
• /
• 2012

Recently, as the importance of the interior noise in a ship cabin has risen, ship builders have becomeconcerned about the use of noise reduction panels to reduce cabin noise. The results of previous researches have been based on analytical and experimental methods using simple sandwich panels. However, panel structures are becoming more complex to improve the transmission loss. Thus, researches that analyze the transmission loss of a panel are reaching the limit of study. This paper reports on research that was performed to determine the sound transmission characteristics of multi-complex panels applicable to high value-added vessels. It presents comparisons between analytical methods and experimental results by using a mini-reverberant chamber with components of sound attenuation panels, including the core and surface materials. The sound transmission loss of multi-complex panels are also analyzed in terms of the influences of the inside perforate plates and air gap thickness on the attenuation. Finally, the multi-complex panel with the highest noise attenuation is proposed based on the analysis results and experimental results in mini-reverberant chamber, which wereverified using a real-size reverberant chamber.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.297-302
• /
• 2011

Railway construction in the random vibration natural phenomena, as well as a relatively regular train loads for dynamic loads, such as a usability and safety should be ensured. Vibration due to train loads and seismic vibrations caused by wind compared to the typically very small in size, rather than the safety of the structure affects the usability. Recently in the downtown area, ground and underground facilities, such as a permanent facility that may cause excessive vibration increases, associated with the construction of these transportation facilities on ground vibrations of structures has been increasing concern and complaint. More recently, high-speed train vibration and noise due to furnace is increasing. In order to solve this problem, such as soundproof considering several feet, but by applying the vibration and noise reduction measures insufficient for the study is Free. In this study, track structure, track, and the inside of the building to support the system, the different forms of neurological history and share about the history cheonanahsan high-speed rail, if passed by the bus stop on the train loads of noise, and the history of interior noise and vibration measurement / analysis of measurement results to assess the relative comparison with the relevant provisions were reviewed. Based on this history, future plans for the design of the bridge to reflect the results of a study is intended to provide information. Waiting for the analysis of vibration and noise reduction, cheonanahsan history passed quietly in the train, on average, appeared to 67.53dB and 65.41dB nervous week on average, were measured with the history. Nervous week waiting room of history and the history cheonanahsan radically different shapes and sizes, so a direct comparison is impossible, but the vibration caused by the disc on the base of the polyurethane elastomer disk is not supported by GERB SYSTEM Waiting more effective in reducing the noise level considered in The main materials for railway and for the localization will help to ensure affordability is considered.

• Journal of the Korean Institute of Rural Architecture
• /
• v.16 no.3
• /
• pp.27-36
• /
• 2014

The purpose of this study is to provide necessary information for the establishment of remodeling range needed first to support the future remodeling of rural housing. For this, this study examined landscape characteristics of rural housing such as an outer wall, a roof, a fence, and a gate which are main elements of forming the landscape of a rural village and rural residents' perception for remodeling. The results were as follows. The subject rural housing mostly had a timber structure and a masonry structure. Common roof types were a hip-and-gable roof and a gable roof. Frequent materials were a panel, a tile, and slate and common colors were primary colors such as reddish brown, black, and gray. A fence made of cement blocks and finished by a white paint was often found. A closed gate with iron frames was common. A standup kitchen and a flush toilet inside the house were common. The family members of rural residents were mostly two including a farmer husband and his wife. Elderly people of sixty and over were the most common. For residential environment satisfaction, a half of respondents were not unsatisfied with residential environment mostly due to an old house. Most respondents who were not satisfied with residential environment had high perception for the need of remodeling. The most commonly asked remodeling part was a roof, followed by a toilet, and an outer wall, indicating that the need of exterior remodeling was higher than that of interior remodeling. For a remodeling method, a total improvement was preferred. Although some rural village housing was improved by support of the government, local governments, or social groups, there are still many old houses. As this co-existence of improved houses and old houses hinders the landscape of rural village, it is necessary to give a support. But rural residents' requests should be first actively reflected to establish a guideline of supporting rural house remodeling.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.4
• /
• pp.2643-2647
• /
• 2013

Background: Despite anti-smoking campaigns, smoking prevalence among Thai males aged 30 or older is high, at around 50%. The purpose of this study was to determine the relationship between smoking and mortality in a rural Thai community. Materials and Methods: Subjects enrolled into the Khon Kaen cohort study between 1990 and 2001 were followed up for their vital status until $16^{th}$ March 2012. The death resource was from the Bureau of Policy and Strategy, Ministry of Interior, Thailand. A Cox proportional hazards model was used to analyse the association between smoking and death, controlling for age, education level and alcohol drinking, and confidence intervals were calculated using the floating risk method. Results: The study recruited 5,962 male subjects, of whom 1,396 died during a median 13.5 years of follow-up. Current smokers were more likely to die than never smokers after controlling for age, education level and alcohol drinking (HR, 95%CI: 1.41, 1.32-1.51), and the excess mortality was greatest for lung cancer (HR, 95%CI: 3.51, 2.65-4.66). However, there was no increased risk with increasing dose of tobacco, and no difference in risk between smokers of yamuan (hand-rolled cigarettes) and manufactured tobacco. Conclusion: Mortality from cancer, particularly lung cancer, and from all causes combined is dependent on smoking status among men in rural Thailand, but the relative risks are lower than have been reported from studies in high income countries, where the tobacco epidemic is more established.

• Journal of the Korean housing association
• /
• v.26 no.4
• /
• pp.11-21
• /
• 2015

Due to the mass production of housing in Korea, homogeneous current housing may fail to represent residents' preferences, especially for the elderly. The purpose of this study is to identify the preferred properties of consumers for accessible housing and to examine whether cluster analysis can identify groups of residents with similar accessible housing preferences. Using a conjoint method, prospective users can jointly consider all accessible attributes, with cost attributes suggested by this study. Four categories (accessibility, safety, convenience, cost), 7 attributes (clear width, level difference, installation of grab bars, installation of elevators: only for single house type, non slippery floor materials, safety alarms, service control devices, cost) and 2 levels for each attribute were chosen. A total of 374 questionnaires were collected through a questionnaire survey method. This study employed ratings-based Conjoint analysis and the respondents ranked each card, which consisted of a set of accessible housing attributes. The data were analyzed using SPSS 16.0. The findings of this study have identified 3-4 clusters for each housing sub market. Each cluster has a different combination of socio-demographic characteristics and residential characteristics, and showed the relative importance or preference values for each accessible attribute of the segmentation. For the single housing, one group of people strongly preferred installation of elevator. The results suggested that better customization of housing could be more appealing to the different clusters of residents, providing accessible housing with cost limitations.

• Journal of the Korean housing association
• /
• v.26 no.4
• /
• pp.63-73
• /
• 2015

'Alley' is the community space as the fundamental living space for local residents and also it's the space which characterize the local community. Research is needed to rediscover the value of alleys which are disappearing due to urban planning. This research focuses on Seochon (current Saejong village) alleys and classify the types of alleys where residential density is seen. Further, this research aims the analysis of dwellings which use the alleys and the characteristics of the layout of alleys. Followings are the research results; 1) Major classifications are 'through alleys' and 'dead end alleys' and there is higher ratio for dead end alleys. 2) Majority of Seochon alleys have the width of more than 1.5 m and less than 3.6 m. 3) There are four types of alleys and straight alleys are most common. 4) Various type of alleys can be found where the width is wider. 5) In case of dead end alleys, there is a tendency of both sides layout rather than one side layout of dwellings. 6) Clusters of hanok can be found at Chebu-dong, Tongin-dong, Nuha-dong and Tongui-dong whereas modern dwellings and villas are more common in Nusang-dong and Ogin-dong. This research analyzes the current status of Seochon alleys and rediscover the value of alleys. This research also provides and presents the basic data materials for continuous sustainable method to keep alleys which characterize the local area.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.4
• /
• pp.370-380
• /
• 2011

This study was carried out to investigate the properties of soils in the sampling green tea farms and the chemical constituents of the green tea leaves at the 3 harvest stages (Ujeon ${\rightarrow}$ Sejag ${\rightarrow}$ Jungjag). The results as follows; The properties of the soils were sandy loam, loam, well drained and fertile-rich in phosphoric acids in general. The contents of chlorophyll, tannin, vitamin-c and total catechin were increased as harvest periods getting late but the contents of total nitrogen, free amino acids, theanine, caffeine were decreased on the reverse. The inorganic constituents Mg, Ca and Mn were increased as harvest periods getting late but the Na, K, B contents were decreased on the reverse. The contents of the total nitrogen, chlorophyll, total free amino acid, theanine, caffeine and total catechin and Na, Mg, Ca, B and Se were insignificant differences between Ujeon and Sejag.

• Journal of Families and Better Life
• /
• v.29 no.5
• /
• pp.1-17
• /
• 2011

This study aimed to analyze health promotion villages from the perspective of therapeutic architecture, and to provide basic information for planning relevant health facilities. On the basis of a review of previous literature, the characteristics of therapeutic architecture were classified into eight categories: safety, comfort, sociality, autonomy, openness, diversity, privacy, and natural environment. Field study and observation were performed in four health promotion villages that conduct programs for lifestyle improvement, physical fitness, and treatment; these villages were also considered to have a healthy residential environment. The researcher and three assistants visited the facilities and checked utilization of space through interviews with the staff and guided tours. Basic information about the subject facilities, such as the purpose of establishment, was gathered from websites before visits. Two of the villages examined in this study had a traditional Korean wooden structure, while the other two were reinforced concrete and masonry block structures. All the facilities emphasized the use of environmentally friendly material and harmony with nature. Each site was divided into the following areas: office, residence, health/treatment, public/rest, and outdoor. The safety standards of the healing architecture were not completely satisfactory at all facilities. In particular, it was found that they lacked adequate universal design equipment. However, the healing characteristics of autonomy and diversity were strong. With regard to autonomy, the facilities allowed visitors to select indoor-outdoor moving lines and the use of front- and backyards constructed on slopes. In addition, they were equipped with many entries, staircases, void, terraces, and crossroads. The architecture was aesthetically designed using feng shui symbolism, and visitors found the scenes depicted in various spaces in the villages to be stimulating. Besides, the facilities were constructed using natural materials, had a natural indoor environment, and provided a sense of spaciousness and flexibility.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.4
• /
• pp.495-503
• /
• 2001

In a functionally graded materials(FGM), two constituent material particles are mixed up according to a specific volume fraction distribution so that its thermoelastic behavior is definitely characterized by such a material composition distribution. Therefore, the designer should determine the most suitable volume fraction distribution in order to design a FGM that optimally meets the desired performance against the given constraints. In this paper, we address a numerical optimization procedure, with employing interior penalty function method(IPFM) and FDM, for optimizing 2D volume fractions of heat-resisting FGMs composed of metal and ceramic. We discretize a FGM domain into finite number of homogenized rectangular cells of single design variable in order for the optimization efficiency. However, after the optimization process, we interpolate the discontinuous volume fraction with globally continuous bilinear function in order to enforce the continuity of volume fraction distributions.

• Composites Research
• /
• v.28 no.1
• /
• pp.6-14
• /
• 2015

Polymerization shrinkage stress analysis of dimethacrylate-based composite (Clearfil AP-X, Kuraray) and silorane-based composite (Filtek P90, 3M ESPE) used for dental composite restorations was performed using strain-gage measurement and FEM analysis. A theoretical equation based on Young's modulus and polymerization shrinkage of the composite resin was proposed to predict the polymerization shrinkage stress. Experimental results showed that the maximum shrinkage stress of Clearfil AP-X was about 2.8 times higher than Filtek P90. FEM analysis agreed with such experimental stress behaviours and showed that the maximum Von-Mises stress appeared near the margin of the filled resin adhered with PMMA ring. The stress concentration at the interface on the specimen surface was higher than that in the interior. The maximum error of shrinkage stress by the theoretical equation was reasonable within 5% in comparison to FEM results under plane stress.