• Composites Research
• /
• 제30권6호
• /
• pp.399-405
• /
• 2017

ILC 기술을 이용하여 장섬유강화 플라스틱 자동차 언더커버 시제품을 제작하고, 시제품의 성형성, 기계적성질 및 내구성을 평가하였다. 언더커버에 대한 사출성형해석과 경량화를 고려하여 시제품을 위한 사출금형을 제작하였다. 보강섬유의 잔존길이 및 분포도를 평가하여 시제품의 성형성을 검토하였고 굴곡강성 및 강도, 충격강도 등의 기계적 성질도 조사하였다. 자동차 내장부품 내구수명 평가 방법인 KLT(Key Life Test)법으로 내구성을 평가하였다.

• 펄프종이기술
• /
• 제47권5호
• /
• pp.120-126
• /
• 2015

In this study, we used various dyes from natural pigments such as tumeric, goldthread, indigo, pagoda tree flower, sappanwood, and safflower to make the Hanji wallpaper with super eight colors of yellow, orange, green, turquoise, violet, red, blue, and magenta. As a result of measuring the lightfastness, magenta dyed with sappanwood showed the worst effect, but blue dyed with only indigo showed the best effect. In terms of the spot test by water, red wallpaper dyed with safflower showed the clear spot, but blue, turquoise, and green dyed with indigo resulted in a little spot. The orange, violet, and magenta dyed with goldthread and sappanwood showed antibacterial activity, and the turquoise, green, and blue also has a little antibacterial activity. However, yellow and red didn't show the some result as expected. In the experiment for efficiency of formaldehyde removal, all Hanji wallpapers dyed with natural pigments showed the significant removal effect of formaldehyde, especially turquoise and red were the highest.

• 펄프종이기술
• /
• 제47권5호
• /
• pp.43-51
• /
• 2015

This research was performed to investigate the quality of leaflets provided with newspapers. The leaflets were classified according to business types and regions. The physical and strength properties were analyzed. The sizes of leaflets were 2, 4, 8 jeoljis of crown octavo, A3, A4, A5, and B3, B4, B5. Most of them were color printed and both-sides printing was much more popular than one-side printing. The leaflets about electronics, educations, and clothing showed lower density than restaurant business and other areas. The leaflets of electronics, educations, and clothing, and large stores showed lower tensile strength, and those of restaurant businesses and building trades showed relatively high tensile strengths. No differences on the quality of leaflets except for large stores were found according to business areas. Large markets made the leaflets with various types of papers, and low quality papers were also included.

• Journal of the Korean Wood Science and Technology
• /
• 제37권5호
• /
• pp.421-425
• /
• 2009

This research investigates the effect of copper retention on copper leaching in wood treated with copper-based preservatives. Radiata pine (Pinus radiata D. Don) sapwood samples were ground in a Wiley mill equipped with a 20-mesh screen. The ground wood was vacuum-treated with various concentrations of alkaline copper quat (ACQ), bis-(N-cyclohexyl-diazeniumdioxy)-copper (CB-HDO), and copper azole (CUAZ). The treated samples were conditioned at $70^{\circ}C$ and 100% RH for 72 hours. The samples were leached by using the distilled water for four weeks, and the copper contents in each sample were measured by X-ray spectroscopy. As expected, the copper leaching was increased with increasing of copper retention. The copper leaching from the ACQ and CB-HDO treated samples were gradually decreased with increasing copper retention: however, the copper losses from the CUAZ treated samples appeared to be proportionally increased with the increase in copper retention in all retention levels tested. The results indicate that at the conditions of the same copper retention ACQ and CB-HDO treated wood have a better leaching resistance compared to CUAZ treated wood.

• 소성∙가공
• /
• 제15권2호
• /
• pp.118-125
• /
• 2006

API steel is used for line-pipe to transport the oil and natural gas. As the recent trends in the development of API steel are towards the use of larger diameter and thicker plate, many researches have been studied to achieve higher strength, higher toughness and lower yield ratio in API steel. However, the strength of API steel after pipe forming is changed depending on the competition of the Bauschinger effect and work hardening which are affected by the strain history during pipe forming process. So, the purpose of this study is to investigate the influence of microstructure on the Bauschinger effect for API steel. To change the microstructure of API steel we have changed the hot rolling condition and the amounts of V and Cu addition. The compression-tensile test and the microstructure observation by OM and TEM were conducted to investigate the yield strength drop and the correlation between the Bauschinger effect and microstructure of API steel. The experimental results show that the increase of polygonal ferrites volume fraction increases the Baushcinger effect due to the back stress which comes from the increase of mobile dislocation density at polygonal ferrite interior during the compressive deformation. The hot rolling condition was more effective on the Bauschinger effect in API steel than the small amount of V and Cu addition.

• Journal of the Korean Wood Science and Technology
• /
• 제38권5호
• /
• pp.450-456
• /
• 2010

This research was performed to develop the simple techniques to predict the copper concentration in alkaline copper quat (ACQ), copper azole (CUAZ), and bis-(N-cyclohexyl-diazeniumdioxy)-copper (CB-HDO) solutions. Two simple methods measuring the color due to copper compounds were evaluated by using a spectrophotometer. One is to directly measure the color of the preservative solutions. The other is to measure the color developed on the surface of a treated sample with the preservatives. The $L^*$ of the measured color values appeared to be the most sensitive to the change of copper concentration. The $a^*$ values of the preservative solutions tended to be decreased at above a certain concentration condition, and the $b^*$ values showed no trend with the concentration of copper compounds in preservative solutions. The surface color of the treated samples were changed from bluish to greenish as time passed. Both methods showed the high $R^2$ values of the regression models determined by using the lightness, which suggested that the methods might be applicable in preservative-treatment mills for the easy and fast prediction of the copper concentration.

• 펄프종이기술
• /
• 제46권6호
• /
• pp.41-49
• /
• 2014

The research was performed to investigate the weathering characteristics of fruit growth paper bags. The bags were used to cover fruits such as grapes and pears. And then they were collected after 30 and 60 days exposure at the orchard. The physical and optical properties of the bags tended to decrease with the exposure times. The larger change on the properties were found on the papers exposed for 30 days. The cover paper for pear showed the largest density changes. The air permeability were decreased with the exposure time in all bags. The cover paper for pear showed the very low values of air permeability. The mechanical properties of the fruit bags showed to be gradually decreased with the length of exposure time. The tear index showed the largest differences. The cover paper for pear showed the rapid decrease on the mechanical properties after 60 days of the exposure. The inner paper, however, showed the strength enough to cover the fruits. The precipitation showed more effect on the degradation of fruit growth paper bags than the light hours.

• 디자인학연구
• /
• 제11권
• /
• pp.72-81
• /
• 1995

본 연구의 목적은 아파트 공간에 남아 있는 한국의 전통 실내공간 및 구성 요소를 조사해보는 것이다. 이를 위해 관련문헌을 고찰하고 52가구의 아파트를 선정하여 방문에 의한 설문조사와 현장조사를 하였으며 그 결과는 다음과 같다. 첫째, 공간의 배치 및 구성은 현관-거실 및 식당-방-안방의 서양적 평면보다 현관-방-거실 및 식당-안방의 한국전통공간에서 기인한 평면이 선호되었다. 둘째, 공간의 특성은 한국 전통공간의 여러 특성 중 거실-방, 거실-식당, 식당-부엌 사이의 공간 디자인에서 개방성과 폐쇄성을 찾아볼 수 있었다. 셋째, 난방의 종류는 전체 라지에타 방식에서 전체 바닥 난방으로 변화하였다. 또한 공간구성 요 소 중에서 바닥은 온돌마루와 장판이, 벽은 벽지가, 천장은 방에는 평 천장, 거실에는 가운데가 매립된 천장이 선호되었고, 창문은 특히 안방의 경우 전통적 창살 문양을 선호하였다

• 한국산업융합학회 논문집
• /
• 제23권4_1호
• /
• pp.531-539
• /
• 2020

When injection mold is repeatedly used for mass production, fatigue phenomenon due to cyclic stress may occur. The surface and interior of structure might be damaged due to cyclic stress or strain. The objective of this study was to analyze failure of SCM435 high-tension bolts connecting upper and lower parts of a three-stage injection molding machine. These bolts have to undergo an accurate heat treatment to prevent the formation of chromium carbide and the action of dynamic stresses. Bolts were fractured by cyclic bending stress in the observation of ratchet marks and beach marks. Damaged specimen showed an acicular microstructure. Impurity was observed. Chromium carbide was observed near the crack origin. Both shape parameters of the Vickers hardness were similar. However, the scale parameter of the damaged specimen was about 20% smaller than that of the as-received specimen. Much degradation occurred in the damaged specimen. Bolts should undergo an accurate heat treatment to prevent the formation of chromium carbide. They must prevent the action of dynamic stresses. Bolts need accurate tightening and accuracy of heat treatment and screws need compression residual stress due to peening.

• KIEAE Journal
• /
• 제8권1호
• /
• pp.37-44
• /
• 2008

Though they have advantages in terms of aesthetic in modern architecture, however, rectangular-shaped towers causes being short of natural light due to deep interior space. There are compromised attempts to take advantages of each building shape selectively. As a result, we now witness the advent of Y-shaped, T-shaped, V-shaped and ㅈ-shaped buildings on the market. The mutative type of apartment houses usually faces southwest or southeast, which has lot of daylighting availability but anyhow, the proportion of the apartment houses which have a full south aspect. The need to verify the potential of daylighting in new building-block shapes exists. At the same time, the expansion of balcony area was legalized and thus, a visual buffer area does not exist any more. All-glass window wall on apartment houses without a balcony produces pretty harmful area with direct sunbeam. Recently, the refurbished version of conventional windows has been developed for the purposed of minimizing energy loss occurred around windows. This research initialized a series of research to deal with almost all on window wall for apartment houses. First of all, huge amount of already-designed examples of apartment houses have been analyzed in terms of floor plan, elevation, orientation and glazing materials.