• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2009.04a
• /
• pp.113-117
• /
• 2009

By statistics in August, 2007, currently Korean motors registration number broke through 16 million units. The demand of motors is being increased as time goes on and the demand of parking lot within apartment complex is increased together. Therefore, it is inevitable to expand underground parking lots. Underground parking lots have relatively weaker environment than the ground and physical/psychological problems as distance far away from the main building, fear for vehicle damage and crimes, impure air, darkness and closed feeling take place. Underground parking lots also occupy a lot of area ratio within apartment complex and have a lot of effects on other facilities. Therefore, underground parking lots are neglected for all that underground parking lots have deep relations with satisfaction for public space within apartment complex. Accordingly, the purpose of the study is to make reference materials when underground parking lots are planned by grasping satisfaction of underground parking lots through inhabitants'mental survey and surveying preferential location and requirements of parking lots.

• Electrical & Electronic Materials
• /
• v.9 no.6
• /
• pp.542-550
• /
• 1996

ZnO-based ceramic varistors containing NiO range 0.5 mol% to 4.0 mol% were fabricated by standard ceramic techniques. The influence of NiO on the microstructure and electrical behavior of ZnO varistor was investigated. As the content of NiO additive increases, average grain size decreased from 16.5.mu.m to 13.2.mu.m, and the amount of NiO existing in the grain interior and grain boundary region was approximately equal. NiO acted as an acceptor which decreases donor concentration due to the increase of Zn vacancy in the grain, and as a driver which migrates Zn interstitial in the depletion region toward the interface of grain boundary, which resulted in the decrease of interface state density. As a result, increasing the content of NiO additive, barrier height, nonlinear exponent, and varistor voltage decreased, and leakage current increased. Wholly, the physical and electrical properties of the ZnO varistor can be said to be affected by the NiO additive.

• International Journal of Concrete Structures and Materials
• /
• v.6 no.1
• /
• pp.19-29
• /
• 2012

In this study, three isolated interior flat slab-column connections that include three types of shear reinforcement details; stirrup, shear stud and shear band were tested under reversed cyclic lateral loading to observe the capacity of slab-column connections. These reinforced joints are 2/3 scale miniatures designed to have identical punching capacities. These experiments showed that the flexural failure mode appears in most specimens while the maximum unbalanced moment and energy absorbing capacity increases effectively, with the exception of an unreinforced standard specimen. Finally, the results of the experiments, as wel l as those of experiments previously carried out by researchers, are applied to the eccentricity shear stress model presented in ACI 318-08. The failure mode is therefore defined in this study by considering the upper limits for punching shear and unbalanced moment. In addition, an intensity factor is proposed for effective widths of slabs that carry an unbalanced moment delivered by bending.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.124-132
• /
• 2010

To predict and analyze the rolling stock's fire growth is considered not only important factor in estimating hazard analysis of rolling stock, but also a primary factor in aspect of a rail load facility. Because it's could be regarded as a ignition source in risk assesment for the facility i.e. tunnel and station. However, currently, standardized method to predict and analyze the fire growth has not been completed yet. it is due to the fact that fire growth is not only depended on thermal property of interior materials, but also is affected dominantly by various factors such as ignition source (characterized by location, duration, and intensity), train running condition and in/exterior ventilation condition. Especially, ventilation condition is one of the most effective factor to affect fire growth in compartment space as noticed by under-ventilation fire condition. In this study, the effect of each ventilation condition on fire growth and load were examined through the numerical method through FDS (Fire Dynamics Simulator).

• The Journal of the Petrological Society of Korea
• /
• v.10 no.3
• /
• pp.212-221
• /
• 2001

This paper introduces the characteristics and generation of the synchrotron radiation (SR). SR has the very high spectral brilliance, broad spectral range, X-ray wavelength tunability, high degree of polarization and collimation, and pulsed time structure. Also describes the technologies to apply in the fields of geology and environmental sciences. These include X-ray tomography, XRF, EXAFS, XANES, DAC, IVP experiments. Further, nuclear power generation and nuclear waste disposal methods are mentioned relating to energy. Using these, analyses of the chemistry, crystal structure and chemical combining states of minerals and rocks can be carried out. Applications in the fields of the economic geology, paleontology and environmental sciences are open too. Informations of the Earth interior materials' behavior under high pressure-temperature can be acquired.

• Transactions of Materials Processing
• /
• v.13 no.1
• /
• pp.53-58
• /
• 2004

The microstructural changes of Al-Zn-Mg-Cu alloy containing Sc during hot extrusion and post heat treatment were investigated. Two kinds of Al-Sc alloys with different alloying elements (B1, B2) were hot extruded to make T-shape bars at extrusion temperature of $380^{\circ}C$, then the bars were solution treated at $480^{\circ}C$ for 2hrs followed by artificial aging at $120^{\circ}C$ for 24hrs. The interior microstructure of as extruded bar consisted of elongated grains, however, fine equiaxed grains were also observed around surface. The microstructural gradient suggested that different restoration process could proceed during the hot extrusion. For B1 and B2, different grain growth behaviors were found around the surface during the post heat treatment. Rapid grain growth behavior was observed for B1 around the surface, however, it was not observed for B2. Orientation pinning, which was related with the evolution of preferred orientation, and precipitation were thought to be responsible for the rapid grain growth.

• Journal of the Korean housing association
• /
• v.20 no.4
• /
• pp.11-18
• /
• 2009

Recently the population to enjoy leisure time has increased, due to the advancement of income level and increase of spare time. In the meantime, the growing attention to well-being life has shed light on Han-ok or traditional Korean house. Such a social background as former, the growing number of people prefer staying at Han-ok style accommodation when they are enjoying leisure time. However there has been little substantial study or survey on architectural standards of Han-ok style accommodation because it is a new type of accommodation facility. Therefore this study aims to suggest a set of basic standards on architectural planning for Han-ok style accommodations. For this purpose, it investigated architectural planning on Han-ok style accommodations in Jeollanamdo province through on-site survey and interview to classify them based upon size and scale of the facility, layout of buildings and interior spaces in terms of function, elevation and materials and to find basic standards on architectural planning of Han-ok style accommodations.

• Journal of the Korean housing association
• /
• v.28 no.1
• /
• pp.95-107
• /
• 2017

The purpose of the study is to analyze the planning characteristics of outdoor space in apartment complexes in terms of child-care environment. We selected 8 apartment complexes in Cheongju, within three years from construction, of small and medium-sized apartments ($60-85m^2$) where a large number of families with young children are presumed to reside in. As a result of the study, it was found that whereas the factors that can be quantified such as the floor height differences, the angles of ramps, and the number of the rest facilities are excellent, the qualitative part which cannot be easily quantified such as the location and direction of the rest facility and play materials should be improved a lot. And the following improvements were suggested; separating the pedestrian passage from the vehicle road in the main entrance of the complex, utilizing the piloti for infant caring, making the entrance area of apartment safe for pedestrians from vehicles, reallocating resting spaces, redesigning resting spaces safer to infants, building or reallocating existing booths at the stops of kindergarten buses, redesigning the square safer from vehicles with shades, making it possible for guardians to watch infants in playing field from the resting space, allocating natural environments essential for child development.

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.1
• /
• pp.16-19
• /
• 2015

A wearable sensing ECG T-shirt for ubiquitous vital signs sensing is proposed. The sensor system consists of a signal processing board and capacitive sensing electrodes which together enable measurement of an electrocardiogram (ECG) on the human chest with minimal discomfort. The capacitive sensing method was employed to prevent direct ECG measurement on the skin and also to provide maximum convenience to the user. Also, low power integrated circuits (ICs) and passive electrodes were employed in this research to reduce the power consumption of the entire system. Small flexible electrodes were placed into cotton pockets and affixed to the interior of a worn tight NIKE Pro combat T-shirt. Appropriate signal conditioning and processing were implemented to remove motion artifacts. The entire system was portable and consumed low power compared to conventional ECG devices. The ECG signal obtained from a 24 yr. old male was comparable to that of an ECG simulator.

• Journal of the Korean Society of Costume
• /
• v.4
• /
• pp.25-37
• /
• 1981

Art Nouveau style refers to the movement of art which was started in France and Belgium in the last decade of the 19th and the early years of the 20th century. The distinguishing characteristics of Art Nouveau style are the sensous sinuosity of its line, nervously undulating, curving over itself, rhythmical, flowing in endless patterns, which are inspired by animals and plants, specially by flowers, leaves, long stalks. The Art Nouveau style includes also the extreme simplicity of form, and asymmetric design. This new trend of art movement spread into architecture, furniture, wall papers, graphic design, accessories and textiles. In this paper, I tried to find out whether or not the Art Nouveau style had an effect on clothing. Because I believe clothing, like architecture, painting, and sculpture, is an Art form that derives from a particular set of cultural circumstances and reflects the needs and aspirations of the society for which it is created. Fashions in clothing over the last five thousand years have mirrorred the art form as well as the spirit. The result of this study shows that the Art Nouveau style made a lasting contribution to the modernism of clothing as well as architecture and interior design at the end of 19th century and the early years of the 20th century. The modernism of clothing appeared in the straight silhouette, asymmetric design, simple and light trimming, embroidery with Art Nouveau pattern, and stylized flower design in textile. Art Nouveau made a great contribution toward the modern clothing to have its liveliness and its harmonious relationship between clothing design and the use of materials.