• 한국디지털건축인테리어학회논문집
• /
• 제11권4호
• /
• pp.39-46
• /
• 2011

This Study is about the Axis used for creating forms of interior spaces in representative works of Peter Eisenman architecture. The plans, elevations, photos of interior spaces of his architecture were collected and analysed. In conclusion, the methods using axises were classified in the axises crossing right angle and the rotating axises crossing right angle. The rotating axis were divided into one-angle rotating and multi-angle rotating. The axises were rotated on the plan or rotated on the elevation. The axises crossing right angle were used for dividing, assembling, transforming and composing different proportions of rectangles in interior spaces. The rotating axises crossing right angle were used for creating divers forms such as triangle, quadrilateral, and polygon. The one-angle rotating emphasizes directions of axises in interior spaces. The multi-angle rotating emphasizes decentered directions in interior spaces. The parts created while crossing axises three-dimensionally were opened or filled. The axises were used dynamically and three-dimensionally for diversity of forms in interior spaces of Peter Eisenman architecture.

• 디지털산업정보학회논문지
• /
• 제13권3호
• /
• pp.27-33
• /
• 2017

In this paper presents the MPPT tracking algorithm using angle control of flexible PV in BIPV. The proposed algorithm is based on MPPT tracking algorithm for curtain wall using flexible PV. It is an algorithm to find optimal power generation condition by controlling the angle of flexible PV using the air layer of window. The angle of flexible PV tests the power generation by separating the center of flexible PV into the interior angle in the interior direction and the external angle in the center of flexible PV. When the angle of flexible PV was used as interior angle, the generation amount was increased by 15.79% and increased by 8.45% compared with the external angle. MPPT tracking is performed on the generation amount of the interior angle which has the most power after comparing the generation amount according to the bending shape of the flexible PV. This algorithm can be the most efficient method for the curtain wall using flexible PV because the bending pattern with the greatest amount of power generation may be different because the environment of the building applying the curtain wall is different.

• 전력전자학회논문지
• /
• 제22권5호
• /
• pp.397-403
• /
• 2017

This paper studies the voltage angle control of interior permanent magnet synchronous motors (IPMSMs). For voltage angle control, the optimum voltage angle trajectory according to the operating speed is researched while the voltage and current limit conditions are considered. Through research, two different optimum voltage angle trajectories that depend on the design of IPMSMs were found. The IPMSM drive based on a voltage angle control that follows such trajectory is proposed. Unlike the conventional voltage angle control method, which is applied only in the flux-weakening region, the proposed voltage angle control can be implemented in all operation ranges from low to high speed. The proposed method is verified by experiments using a DSC controller for 800 W IPMSM.

• Journal of Power Electronics
• /
• 제13권6호
• /
• pp.964-974
• /
• 2013

A modified direct torque control (DTC) method based on torque angle is proposed for interior permanent-magnet synchronous motor (IPMSM) drivers used in electric vehicles (EVs). Given the close relationship between torque and torque angle, proper voltage vectors are selected by the proposed DTC method to change the torque angle rapidly and regulate the torque quickly. The amplitude and angle of the voltage vectors are determined by the torque loop and stator flux-linkage loop, respectively, with the help of the position of the stator flux linkage. Furthermore, to satisfy the torque performance request of EVs, the nonlinear dead-time of the invertor caused by parasitic capacitances is considered and compensated to improve steady torque performance. The stable operation region of the IPMSM DTC driver for voltage and current limits is investigated for reliability. The experimental results prove that the proposed DTC has good torque performance with a brief control structure.

• KIEAE Journal
• /
• 제14권1호
• /
• pp.15-22
• /
• 2014

Among the various building envelope elements, the glass area takes up the largest portion in the office building design. However, a large area of glass can cause problems such as excessive solar radiation, thermal comfort, and glare. Thus it is important to install the glass area to an appropriate level, and control solar radiation and inflow of daylight with blind devices. This study aims to improve the visual performance of the work plane through the automatic control of the venetian blinds. A total of eight kinds of control strategies were chosen; Case 1 does not control the blinds, Case 2 with the blind slats fixed at the angle of 0 degree, Case 3 to 6 using the existing blind control programs, and Case 7 and 8 with improved blind control. Case 3 with 90 degrees had the best energy performance, but the average indoor illuminance was 113lux, which is below the standards. Cases 4 and 5 showed higher levels of interior daylight illuminance with the average of 281lux and 403lux respectively. However, the fixed angles may have difficulties controlling excessive direct sunlight coming into the room and may cause glare. Cases 6 and 7 used sun tracking angle control and cut-off angle control, and the average interior illuminance was measured 250lux and 385lux respectively. Case 8 used the cut-off angle control in an hourly manner, satisfying the standard illuminance of 400lux with an average interior illuminance of 561lux. It was evaluated to be the best method to control direct solar radiation and to guarantee proper level of interior illumination.

• 한국디지털건축인테리어학회논문집
• /
• 제3권2호
• /
• pp.20-29
• /
• 2003

It is an obstacle to improve living environments that an acute angle architectural design is often seen. Though that design give a stress to the neighborhood, we can't prevent the design taking place. We must control architectural design, because it is important to public worth and urban aesthetic. To prevent selfish architectural design, it is recommend to extend design review and reflect neighborhood opinions.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제41권2호
• /
• pp.215-225
• /
• 2002

In this paper we consider some properties of. bisector of interior angle(theorem 1) and exterior angle(theorem 2) in triangle by using analogy. As a result of analyzing various mathematics textbooks we have known that they focused not on relation between two theorems, but on describing two theorems. We have seen that theorem 2 is able to be inferred from theorem 1 by using analogy. After proving theorem 1 by some methods we analyze proof process, extract proof ideas, and analogize some ideas for proving theorem 2. From this we are able to find relationships between theorem 1 and 2.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 전력전자학술대회
• /
• pp.405-406
• /
• 2017

본 논문에서는 매입형 영구자석 동기전동기(Interior Permanent Magnet Synchronous Motor, IPMSM)의 전압각 제어 시에 최대 토크 운전에 필요한 전압각(Optimal Voltage Angle)을 얻기 위해 IPMSM의 설계에 따른 최적 전압각을 속도 영역에 따라 분석하였다.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제6권2호
• /
• pp.1-9
• /
• 1968

In mathematics, a definition must have authentic reasons to be defined so. On defining geometric figures, there must be adequencies in sequel and consistency in the concepts of figures, though the dimensions of them are different. So we can avoid complicated thoughts from the study of geometric property. From the texts of SMSG, UICSM and others, we can find easily that the same concepts are not kept up on defining some figures such as ray and segment on a line, angle and polygon on a plane, and polyhedral angle and polyhedron on a 3-dimensionl space. And the measure of angle is not well-defined on basis of measure theory. Moreover, the concepts for interior, exterior, and frontier of each figure used in these texts are different from those of general topology and algebraic topology. To avoid such absurdness, I myself made new terms and their definitions, such as 'gan' instead of angle, 'polygonal region' instead of polygon, and 'polyhedral solid' instead of polyhedron, where each new figure contains its interior. The scope of this work is hmited to the fundamental idea, and it merely has dealt with on the concepts of measure, dimension, and topological property. In this case, the measure of a figure is a set function of it, so the concepts of measure is coincided with that of measure theory, and we can deduce the topological property for it from abstract stage. It also presents appropriate concepts required in much clearer fashion than traditional method.

• 설비공학논문집
• /
• 제20권5호
• /
• pp.304-313
• /
• 2008

This paper investigates the indoor-air-quality (IAQ) characteristics of the interior space equipped with system air-conditioner. The behaviors of individual variables such as temperature, humidity and concentration of carbon dioxide ($CO_2$) that influence on IAQ of the interior space were characterized under various cooling conditions by numerical and experimental studies. The numerical analysis predicting the temperature behavior of the interior space was conducted, and its results showed a good agreement with the experimental ones. The $CO_2$ concentration and humidity were measured and their time dependent behaviors were monitored and analyzed. From the results, it was found that there existed the differences of the time-dependent behaviors of IAQ variables according to the locations. In addition, it is demonstrated that the large discharge angle of $45^{\circ}$ made the temperature profile more irregular and the high discharge flow of 5.34 m/s produced similar temperature profiles at three different sensing locations. Finally, the humidity of interior space was less sensitive to the changes of the air cooling conditions than the case of temperature and the $CO_2$ concentration increase mainly depended on the number of individuals inside the space.