• Bulletin of the Korean Chemical Society
• /
• v.29 no.10
• /
• pp.1932-1936
• /
• 2008

A new analytical method using 1-(2-pyridylazo)-2-naphthol modified $SiO_2$ nanoparticles as solid-phase extractant has been developed for the preconcentration of trace amounts of mercury(II) in different water samples. Conditions of the analysis such as preconcentration time, effect of pH, sample volumes, shaking time, elution conditions and effects of interfering ions for the recovery of analyte were investigated. The adsorption capacity of nanometer $SiO_2$-PAN was found to be 260 ${\mu}molg^{-1}$ at optimum pH and the detection limit (3$\sigma$) was 0.48 ${\mu}gL^{-1}$. The extractant showed rapid kinetic sorption. The adsorption equilibrium of mercury(II) on nanometer $SiO_2$-PAN was achieved just in 5 mins. Adsorbed mercury(II) was easily eluted with 5 mL of 6 M hydrochloric acid. The maximum preconcentration factor was 50. The method was applied for the determination of trace amounts of mercury(II) in various water samples and industrial effluents.

• Analytical Science and Technology
• /
• v.8 no.3
• /
• pp.391-396
• /
• 1995

A rapid preconcentration method based on solvent extraction is described for the determination of gold by flame atomic absorption spectrophotometry. Trace amounts of gold was extracted as a new chelating agent, 3-thiophenaldehyde-4-phenyl-3-thiosemicarbazone from pH 4.0 in diisobutyl ketone. The method is simple, fast, free from the effect of many interfering ions and has a high sensitivity and a good precision. Gold is quantitatively separated and concentrated from the elements in standard sample, and the value of the recovery was 91.7 and 108.3% by the proposed method.

• Journal of the Korean Chemical Society
• /
• v.17 no.6
• /
• pp.439-443
• /
• 1973

2-Mercaptothiazoline is very sensitive reagent for silver, which have been used for highly selective amperometric determination of silver. A method is described for the determination of micro-quantity of silver by amperometric titration with 2-mercaptothiazoline in ammonical solution. Direct titration of milligram amount of silver (0.05∼1.00mg) is possible in the presence of a number of foreign ions in ammonical solution containing ethylenediaminetetraacetic acid as masking agent under atmosphere. The interfering elements are gold and platinum. The milligram amounts of silver can be determined by the proposed method within an error ${\pm}$5%.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.9
• /
• pp.1261-1264
• /
• 2003

A method for the determination of trace amount of sulfide based on the addition reaction of sulfide with methyl green at pH 7.5 and $25{\circ}C$ is described. The reaction is monitored spectrophotometrically by measuring the decrease in absorbance of the dyestuff at 637 nm by the initial rate and fixed time method. The calibration graph is linear in the range 30-1200 ppb. The theoretical limit of detection was 0.014 ppm. Seven replicate analysis of a sample solution containing 0.70 ppm sulfide gave a relative standard deviation of 1.5%. The interfering effects of various ions on sulfide determination have been reported and procedures for removal of interference have been described. The proposed method was applied successfully to the determination of sulfide in tap and wastewater samples.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.6
• /
• pp.930-934
• /
• 2005

A chloroform membrane system containing a given mixture of benzylaza-12-crown-4 and oleic acid is introduced for the selective and efficient transport of $Pb^{2+}$ ion. The transport was capable of moving metal ions ‘up-hill’. In the presence of ${S_2O_3}^{2-}$ion as a suitable metal ion acceptor in the receiving phase, the amount of lead ion transport across the liquid membrane after 150 minutes is (95.0 ${\pm}$ 1.7)%. The selectivity and efficiency of lead transport from aqueous solution containing $Tl^+,\;Ag^+,\;Mg^{2+},\;Ca^{2+},\;Co^{2+},$ $Ni^{2+},\;Cu^{2+},\;Zn^{2+},\;Hg^{2+}$ and $Cd^{2+}$were investigated. In the presence of thiosulfate as a suitable masking agent in the source phase, the interfering effects of $Ag^+\;and\;Cu^{2+}$ were diminished drastically.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.1
• /
• pp.36-38
• /
• 1986

The Ferricyanide-sensing electrodes were prepared with $Ag_2S\;and\;Ag_3Fe(CN)_6$ (mole ratio 3:1-7:1). The 5:1 $(Ag_2S:Ag_3Fe(CN)_6)$ composition is superior to others in terms of potentiometric response, rapidity of response and reproducibility. Testing was done over the concentration range $10^{-1}M{\sim}10^{-6}M\; Fe(CN)_6^{3-}$ at pH 6.8 with constant ionic strength. The concentration-potential curve was linear and coincided with the Nernstian slope (19.7 mV/decade). Interfering ions were $I^-,\;Br^-,\; SCN^-\;and\;Fe(CN)_6^{4-}$ and the life time of this electrode was 3 weeks. This electrode could be used as the indicator electrode for measuring the ferricyanide and ferrocyanide.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.9
• /
• pp.909-912
• /
• 2000

Thallium(I) selective electrodes based on meso-alkyl substituted calix[4]pyrroles such as, meso-octamethyl-calix[4]pyrrole (L1), meso-octaethylcalix[4]pyrrole (L2) and meso-tetraspirocyclohexylcalix[4]pyrrole (L3) as sensor molecules have been pre pared and tested. The conditioned electrode (E4) incorporating L3gave best results with a wide working concentration range of 10-5.5 ~10-1 M near-Nernstian slope of 56.0 mV/decade of activity and detection limit of 10-6.0 M. This electrode exhibited a fast response time of 30 s and high selectivity over Na+ , K+ and other metal ions with only Ag+ interfering. The electrode works well in the pH range 2.0-11.0 and can be successfully employed for the determination of Tl+.This proposed electrode was also used as an indicator electrode in potentiometric titration of Tl+.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.4
• /
• pp.338-342
• /
• 1996

A sensitive method for the determination of trace cadmium after the preconcentration by extracting its 8-hydroxyquinoline complex into a molten benzophenone was developed. Several experimental conditions such as the pH of solution, the amounts of 8-hydroxyquinoline and benzophenone, stirring time, and standing time were optimized. Trace cadmium in 100 mL water sample was chelated with 2.5 mL of 0.001 M 8-hydroxyquinoline at pH 8.0. After 0.07 g benzophenone was added, the solution was heated to about 70 ℃ and stirred vigorously for 1 minute to dissolve the complex quantitatively in a molten benzophenone, and stood for 30 minutes to reproduce the microcrystalline benzophenone. The benzophenone containing Cd-8-hydroxyquinoline complex was filtered and dissolved in acetone. Cadmium was determined by a flame atomic absorption spectrophotometry. The interfering effects of diverse concomitant ions were investigated and eliminated. This method could be applied to natural water samples and the recovery of more than 90% was obtained in the real samples.

• Analytical Science and Technology
• /
• v.20 no.3
• /
• pp.246-250
• /
• 2007

The quantitative determination of chromium(VI) by separation from chromium(III) complex of 8-hydroxyquinoline using solvent extraction has been studied. The reaction conditions for chromium(III) complex of 8-hydroxyquinoline and the solvent extraction of complex were investigated in detail. The chromium(III) complex was extracted with organic solvent (n-hexane) and residual chromium(VI) was determined by ICP-AES in aqueous layer. This technique is quantitative in the pH range of 8-9 and the limitations such as interfering ions were discussed.

• Analytical Science and Technology
• /
• v.6 no.1
• /
• pp.57-63
• /
• 1993

Spectrophotometric determination of cobalt by flow injection method is described. 2-(5-Bromo-2-pyridylazo)-5-(N-propyl-N-sulfopropylamino) aniline rapidly forms a water-soluble complex with cobalt in $NH_3-NH_4Cl$ buffer solution at pH 10.5. The absorption maxima of this complex is at 545 nm with molar absorptivity of $58000L\;mol^{-1}\;cm^{-1}$. The calibration curve of cobalt is linear over the range of 0.1 to 0.6ppm and the detection limit is 25ppb. The relative standard deviation is ${\pm}0.72%$ for 0.5ppm and the sampling rate is $60samples\;hr^{-1}$. The interfering effect of some cations and anions was investigated. Ni(II), Cu(II), Fe(III) and $CN^-$ interfered severely. The interfering effect of these matallic ions could be decreased by adding $1.0{\times}10^{-3}M$ EDTA solution to the carrier stream.