• 환경생물
• /
• 제38권4호
• /
• pp.578-585
• /
• 2020

A new free-living marine nematode species of the genus Belbolla Andrássy, 1973 belonging to the family Enchelidiidae is described based on specimens collected from the sediment of a subtidal benthic environmental habitat in the East Sea, Korea. Belbolla wonkimi sp. nov. differs from its congeners by the combination of the following characteristics: a relatively long body (3263-3396 ㎛), the absence of ocelli, nine oesophageal bulbs in the posterior pharynx, well-developed two winged precloacal supplements, longer spicule length(115-130㎛, 1.6-1.8 anal body diameter long), and a triangle-shaped shorter gubernacular apophysis (17-18 ㎛). Comparative tables on the biogeographical and morphological characteristics of Belbolla species are presented. A DIC (differential interference contrast) photomicrograph of the new species is also provided. This is the first taxonomic report on the genus Belbolla from Korean waters.

• 환경생물
• /
• 제40권4호
• /
• pp.579-590
• /
• 2022

Three free-living marine nematodes(Desmoscolex(Desmoscolex) max Timm, 1970, Daptonema longiapophysis Huang and Zhang, 2010, and Pseudosteineria sinica Huang and Li, 2010) were newly recorded in Korea. Desmoscolex (D.) max was found from subtidal coarse sediment around Wangdolcho in the East Sea. It was characterized by the presence of untypical setae arrangement, obviously elongated triangle-shaped head, long hairy cephalic setae, a long naked tail spinneret, and the absence of peduncle at the base of somatic setae. Daptonema longiapophysis was obtained from intertidal sandy sediments in the southern coast of Korea. It was characterized by the presence of setiform labial sensilla, spicules with a projection on both sides, and gubernaculum with dorso-caudal apophysis. Pseudosteineria sinica was discovered from the intertidal sediment in the Yellow Sea. It was characterized by unobservable amphideal fovea, different lengths of spicules, and gubernaculum with dorso-caudal apophysis. In this study, we provide detailed morphological features of three free-living marine nematodes by differential interference contrast microscopy.

• 한국통신학회논문지
• /
• 제36권11C호
• /
• pp.682-693
• /
• 2011

EST (Energy Spreading Transfonn) 기반의 변조는 광대역 무선통신에서 주파수 선택적 fading을 방지하는 효과적인 기술이다. 이 기법은 liner decoder의 복잡도를 가지면서 ISI (Inter-Symbol Interference)-free MFB (Matched Filter Bound) 에 근접한 성능을 나타낸다. EST 기반의 변조는 원래 QPSK에 대해 제안되었다. 하지만, 다중 fading 채널의 capacity를 최대한 이용하기 위해서 higher-order의 변조방식이 필요하다. 본 논문에서는 QPSK 에 대해 제안되었던 기존 EST 기반 변조를 재검토하고, 이를 8 PSK와 16 QAM으로 확장하는 것을 논의한다. 확장한 시스템의 성능은 Proakis B 채널과 8-tap fa이ng 채널에서의 가상실험을 통해 검증되었다. 8 PSK로 확장한 EST기반의 시스템은 MFB에 매우 근접한 성능을 보여주었지만 16 QAM으로 확장한 EST기반의 시스템은 MFB와의 성능 차이를 보여주었다.

• 농업과학연구
• /
• 제22권1호
• /
• pp.11-23
• /
• 1995

The CAD/CAM system for the manufacturing automation is the newest technology in mechanical engineering area and becomes the important research subject nowadays. Most of all hardwares and softwares for the CAD/CAM system used in the our manufacturing companies such as automobile company are developed by the foreign country and the purchasing price of them is very expensive but their applicability to a certain area is very limited. This study was conducted to develope a CAD/CAM system for the design and the automatic manufacturing of the iron pattern shaped with 3 - dimensional free curved surface, and to test its applicability to the design and the manufacturing of the rotary blade. The results obtained from the study are as follow; 1. The CAD system which can process graphic procedures from the free curved surface shaped data was developed with personal computer. 2. The CAM main program was developed. This main program could produce CL data from CAD data file by checking the tool interference according to the cutting mode. 3. The sub. program which can simulate the tool trace from the CL data was developed. 4. The post processor for the Deckel FP2NC NC milling machine from CL data file was developed and the sub program could transmit NC program through modem to NC milling machine was developed. 5. The developed CAM system seemed to be applicable to any other system. Because the measuring results of the cross sectional thickness of the plastic model from the manufacturing iron pattern by the system showed that this system could properly check the tool interference. 6. In took 75~90 hours to manufacture two iron patterns of rotary blade. For the sake of convenience in applying to the other systems, this system was developed in BASIC and FORTRAN computer language and minimum portion of machine language as possible.

• 한국BIM학회 논문집
• /
• 제12권4호
• /
• pp.19-31
• /
• 2022

With the development of 3D-based CAD (Computer Aided Design), attempts at freeform building design have expanded to small and medium-sized buildings in Korea. However, a standardized system for continuous utilization of shape data and BIM conversion process implemented with 3D-based NURBS is still immature. Without accurate review and management throughout the Freeform building project, interference between members occurs and the cost of the project increases. This is very detrimental to the project. To solve this problem, we proposed a continuous utilization process of 3D shape information based on BIM parameters. Our process includes algorithms such as Auto Split, Panel Optimization, Excel extraction based on shape information, BIM modeling through Adaptive Component, and BIM model utilization method using ID Code. The optimal cutting reference point was calculated and the optimal material specification was derived using the Panel Optimization algorithm. With the Adaptive Component design methodology, a BIM model conforming to the standard cross-section details and specifications was uniformly established. The automatic BIM conversion algorithm of shape data through Excel extraction created a BIM model without omission of data based on the optimized panel cutting reference point and cutting line. Finally, we analyzed how to use the BIM model built for automatic conversion. As a result of the analysis, in addition to the BIM utilization plan in the general construction stage such as visualization, interference review, quantity calculation, and construction simulation, an individual management plan for the unit panel was derived through ID data input. This study suggested an improvement process by linking the existing research on atypical panel optimization and the study of parameter-based BIM information management method. And it showed that it can solve the problems of existing Freeform building project.

• 한국음향학회지
• /
• 제28권5호
• /
• pp.454-460
• /
• 2009

본 논문에서는 핸즈프리 전화통신를 위한 선형예측기를 이용한 잔여반향 및 잡음제거구조를 제안하다. 제안하는 구조는 비동시통화구간의 잔여반향신호를 선형예측하여 백색화시킨다. 선형예측에 의해 백색화된 잔여반향신호에는 여전히 음성성분이 남아있다. 제안된 구조는 선형예측오차신호와 선형예측신호의 전력을 이용하여 백색화된 신호를 더욱 더 백색화시킨다. 이러한 백색화 과정을 거치면 동시통화구간에는 근단화자음성과 주변 잡음이 존재하고, 비동시통화구간에는 백색잡음이 존재하게 된다. 근단화자음성과 백색화된 신호를 결합하여 다시 선형예측기에 통과시켜 배경잡음을 추가로 제거한다. 컴퓨터 시뮬레이션을 통해 제안하는 방법이 AIC (acoustic interference cancellation) 측면에서 우수함을 보인다.

• 대한임상검사과학회지
• /
• 제41권4호
• /
• pp.173-179
• /
• 2009

The analysis of serum free light chains (sFLCs) can improve the diagnosis and monitoring of multiple myeloma and other plasma cell dyscrasias. As with other immunoassays, sFLCstests are subject to potential antigen excess and heterophilic antibody interference. We describe 9 cases of sFLCs antigen excess in patients with multiple myeloma using the FreeliteTM Human Kappa and Lambda Free Kits (The Binding Site ltd., Birmingham, UK) and the Hitachi7600 P module turbidimetric system. A total of 1,247 consecutive samples from 250 patients with multiple myeloma were assayed for sFLCs from April to September, 2009. The samples were assayed using an initial dilution of 1 :5and subsequent dilutions of 1 :50 and 1: 100. The same samples were analyzed for the presence of monoclonal gammopathies using serum protein electrophoresis (SPE) and immunofixation electrophoresis (IFE). There were 9 samples (0.72%) of antigen excess with 3 cases of kappa (0.24%) and 6 cases of lambda (0.48%). These cases represents an example of antigen excess or "hook effect" using the serum free light chain assays and mandates high level of attention to falsely low sFLC levels due to antigen excess, especially when it is disaccordant to other assay results or clinical manifestations.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권3호
• /
• pp.580-594
• /
• 2015

Liquid sloshing in two-dimensional (2-D) and three-dimensional (3-D) rectangular tanks is simulated by using a level set method based on the finite volume method. In order to examine the effect of natural frequency modes on liquid sloshing, we considered a wide range of frequency ratios ($0.5{\leq}fr{\leq}3.2$). The frequency ratio is defined by the ratio of the excitation frequency to the natural frequency of the fluid, and covers natural frequency modes from 1 to 5. When fr = 1, which corresponds to the first mode of the natural frequency, strong liquid sloshing reveals roof impact, and significant forces are generated by the liquid in the tank. The liquid flows are mainly unidirectional. Thus, the strong bulk motion of the fluid contributes to a higher elevation of the free surface. However, at fr = 2, the sloshing is considerably suppressed, resulting in a calm wave with relatively lower elevation of the free surface, since the waves undergo destructive interference. At fr = 2, the lower peak of the free surface elevation occurs. At higher modes of $fr_3$, $fr_4$, and $fr_5$, the free surface reveals irregular deformation with nonlinear waves in every case. However, the deformation of the free surface becomes weaker at higher natural frequency modes. Finally, 3-D simulations confirm our 2-D results.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권2호
• /
• pp.148-156
• /
• 2015

A continuous type side jet controller which has four nozzles with thrust control devices was considered. It is deployed to a missile for high maneuverability and fast controllability in the terminal guidance phase. However, it causes more complex aerodynamic jet interactions between the side jet and the supersonic free stream than does the conventional impulse type side jet with a small single thruster. In this paper, a numerical investigation of the jet interference effects for the missile equipped with a continuous type side jet thruster is presented. A three-dimensional flow field was simulated by using a commercial unstructured-based CFD solver. The numerical simulation method was validated through comparison with wind tunnel test results for the single jet. The method of defining jet direction for this type of side jet control to minimize simulation cases was also introduced. Flow fields investigation and jet interaction effects for various flow conditions, jet pressure ratios and defined jet direction conditions were performed. From the numerical simulation for the continuous type side jet, extensive aerodynamic interference data were obtained to construct an aerodynamic coefficients database for precise missile control.

• 한국항공우주학회지
• /
• 제34권12호
• /
• pp.67-74
• /
• 2006

아음속풍동 폐쇄형 시험부내의 비정상 벽면효과 보정 연구의 일환으로 시험부 벽면압력을 사용하는 비정상 흐름에 대한 blockage 보정 기법을 개발하였다. 시험부 벽면압력은 프리에 급수로 전개하고, 전개된 각 계수를 벽면압력측정 방법을 사용하여 전 주기에 대해 일괄적으로 보정하는 준 정상상태 보정 방법을 제시하였다. 본 연구에서 제시된 방법을 검증하기 위해 수치적으로 계산된 폐쇄형 시험부내의 원형실린더 및 강제 진동하는 익형의 비정상 흐름에 적용하였다. 그 결과 본 연구에서 제시된 방법은 자유흐름 상태와 일치되는 blockage 보정 결과를 보임을 확인하였다.