• Proceedings of the Korea Information Processing Society Conference
• /
• 2019.05a
• /
• pp.82-85
• /
• 2019

An adaptive power control scheme is proposed for the cognitive relay networks with joint overlay and underlay spectrum sharing model. The transmit power of the secondary user is adjusted adaptively according to the spectrum sensing results and the interference channel condition. The outage probability of the secondary user is compared by Monte - Carlo simulations between the fixed power control scheme and pure overlay or underlay spectrum sharing schemes. The results show that, by employing the adaptive power control strategy, the interference probability of the secondary user to the primary user is decreased by 70 % ~ 80 % under the same outage probability. Also, the outage probability of the secondary user is reduced by 1 ~ 2 orders of magnitude under the same interference probability. Thus, the performance of the spectrum sharing is improved effectively.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.2
• /
• pp.27-33
• /
• 2012

A marine propeller is designed for preventing cavitation priority. Cavitation is a phenomenon which is defined as the vibration or noise by dropping the pressure on the high-speed rotation of the propeller. There has to be a enough thrust on the low-speed rotation for preventing cavitation. Thus, it has to be considered in the increasing of the number of blade and the angle of wing to design the propeller. In addition, flow resistance will be increasing by narrowing the width between blades. So high quality surface roughness of the hub to minimize flow resistance is required. Interference problems with tool and neighboring surfaces often take place from this kind of characteristics of the propeller. During 5-Axis machining of these propellers, the excessive local interference avoidance, necessary to avoid interference, leads to inconsistency of cutter posture, low quality of machined surface. Therefore, in order to increase the surface quality, it is necessary to minimize the cutter posture changes and create a continuous tool path while avoiding interference. This study, by using a MC-space algorithm for interference avoidance and a MB-spline algorithm for continuous control, is intended to create a 5-Axis machining tool path with excellent surface quality. Also, an effectiveness is confirmed through a verification manufacturing.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.185-185
• /
• 2000

This paper designs an interference mitigation filter for GPS receiver using a time-domain signal processing techniques (Adaptive Transversal filter). ATF is designed using verilog and simulated using COSSAP for evaluating its performance.

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06a
• /
• pp.420-421
• /
• 2011

This paper derive an optimal distributed power control strategy under both the probability of dropping a packet due to buffer overflow constraints at the secondary users and the interference constraints to the primary users.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1234-1238
• /
• 2005

As the low power GPS signal is susceptible to interference, interference can seriously degrade the performance of GPS receiver. This paper designs a ANIEF(Adaptive Narrowband Interference Excision in Frequency domain) filter that removes narrow band interferences with low signal loss. This filter uses the pre-correlation technique and attempts to filter out the interference in the frequency domain. The interference excision performance of the designed filter is evaluated for various interferences using the ANIEF filter inserted GPS software receiver and the interference generator. Interferences considered in this paper are single-tone CWI(Continuous Wave Interference), multi-tones CWI, pulsed CWI, and swept CWI. The narrowband interference excision filter in frequency domain is very effective against various interferences and the strong interference with a simple structure. However, the signal power loss is unavoidable while transforming. In this paper, the hamming window and overlap technique are adopted to reduce the signal power loss. Finally, the interference excision performance and the reduced signal power loss of the ANIEF filter are shown.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.10
• /
• pp.1073-1080
• /
• 2008

A GPS receiver platform has been developed to design an interference rejection filter and the platform is also able to evaluate performance of those filters. This platform consists of RF/IF part, data acquisition part and PC part. The RF/IF part converts RF signals to IF signals, the data acquisition part transmits the IF signals to PC using USB device. The PC part rejects the interferences with a filter and then it does navigation with GPS software receiver. The RF/IF part and data acquisition part had been validated with signal spectrum, and the PC part had been validated with the navigation results of GPS receiver. Finally, the entire platform including interference rejection filter has been confirmed with the navigation results in case that the GPS signals and interference entered this platform. As a result, the GPS receiver operated well against interference with 45dB JSR.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.10
• /
• pp.1-8
• /
• 1997

In this paper, we propose a call admission control scheme which can be used in real environment for the traffic cibtrik if a base station if DS-CDNA cellular systems. The proposed scheme estimates the mean and variance of other cell interference by using the values used for the closed loop power control. The reerse link capacity of the base station can be calculated by using the estimated mean and variance of other cell interference. The base station admits a call only if the number of users is less than the calculated reverse link capacity. In addition, we propose a simple method to obtain the equivalent number of voice call users per one data call user in multi-rate traffic environment. The method can be applied to call admission control in multi-rate traffic environment.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.251-254
• /
• 2003

In this paper, we develop an effective method for estimating and predicting interference power strength using the IMM(Interacting Multiple Model) algorithm. Based on the proposed interference prediction algorithm, we adjust transmission power of mobile terminals to maintain a certain level of target signal - to - interference- plus -noise- ratio ( SINR ) at the base station. Results of numerical experiments are presented to show a performance profile of the proposed algorithm.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.3 no.1
• /
• pp.26-51
• /
• 2009

In this paper, we propose an empirical framework for modeling and emulating interference in multi-hop wireless ad-hoc networks. Wireless interference causes wide variation in the frame delivery rate at a link, and thus we cannot represent the state of the link with only two states, connected state and disconnected state, as in wired networks. We first investigate wireless interference in detail, in order to accurately calibrate the interference and identify its underlying attributes, and then we simulate the diverse occurrences and effects of interference, after incorporating the scheme into a simulation tool. Based on these observations, we devise a modeling and simulation framework with several control parameters, and perform an extensive set of simulation studies. The simulation results indicate that the proposed framework enables us to examine various attributes of wireless interferences and their effects on wireless network protocols and systems.

• Journal of electromagnetic engineering and science
• /
• v.18 no.4
• /
• pp.254-260
• /
• 2018

In this study, we suggest an emulator for generating multiple heterogeneous interference signals in the Korean radio frequency identification/ubiquitous sensor network (RFID/USN) frequency band. The proposed emulator uses only one universal software radio peripheral to generate multiple heterogeneous interference signals more economically. Moreover, the physical and media access control parameters can be adjusted in real time using the LabVIEW program, thereby making it possible to create various time-varying interference environments easily. As an example showing the capability of the proposed emulator, multiple interference signals consisting of a frequency-hopping RFID signal and two LoRa signals with different spreading factors were generated. The generated signals were confirmed in both frequency and time domains. From the experimental results, we verified that our emulator could successfully generate multiple heterogeneous interference signals with different frequency and time domain characteristics.