• 대한금속재료학회지
• /
• 제48권1호
• /
• pp.71-76
• /
• 2010

The use of advanced high-strength steels (AHSS) in automotive applications has steadily increased over the past few years. Two different failure modes are generally observed in shear-tension tests for resistance spot welds of AHSS. interfacial fractures and full button pullout. Despite high load-carrying capacity. the resistance spot welds in AHSS cue prone to interfacial fractures. To improve the load carrying ability of welds during shear-lap and cross tension tests. the tip surface of the electrode was grooved in a round shape. The electrode tip surface was modified so as to concentrate the current now in the central and circumferential portion of the electrode force. The results showed that the interfacial fracture was suppressed in welds using the modified electrode. In a comparison of failure mode during mechanical tests. the welds made with the modified electrode showed a higher tendency to fail via full button pullout fracture.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.407-414
• /
• 2004

Interfacial properties between rock mass and shotcrete play a significant role in the transmission of loads from the ground to shotcrete. These properties have a major effect on the behaviours of rock mass and shotcrete. They, however, have merely been assumed in most of numerical analyses, and little care has been taken in identifying them. This paper aimed to identify interfacial properties including cohesion, tension, friction angle, shear stiffness, and normal stiffness, through direct shear tests as well as interface normal compression tests for shotcrete/rock cores obtained from a tunnel sidewall. Mechanical properties such as compression strength and elastic modulus were also measured to compare them with the time-dependent variation of interfacial properties. Based on experiments, interfacial properties between rock and shotcrete showed a significant time-dependent variation similar to those of its mechanical properties. In addition, the time-dependent behaviours of interfacial properties can be well regressed through exponential and logarithmic functions of time.

• Journal of Mechanical Science and Technology
• /
• 제16권11호
• /
• pp.1477-1484
• /
• 2002

Various characteristics of a thin liquid film in its vapor-phase are investigated using the molecular dynamics technique. Local distributions of the temperature, density, normal and tangential pressure components, and stress are calculated for various film thicknesses and temperature levels. Distributions of local stresses change considerably with respect to film thicknesses, and interracial regions on both sides of the film start to overlap with each other as the film becomes thinner. Integration of the local stresses, i.e., the surface tension, however, does not vary much regardless of the interfacial overlap. The minimum thickness of a liquid film before rupturing is estimated with respect to the calculation domain sizes and is compared with a simple theoretical relation.

• 한국응용과학기술학회지
• /
• 제17권3호
• /
• pp.167-173
• /
• 2000

The process variables for the manufacture of translucent microemulsion prepared with 2-octyl dodecanol, 12-hydroxy stearic acid cholesteryl , POE(40)HCO and 1,3-butandiol were examined initially (primary emulsion) and following aging for three months. The techniques empolyed in this study were particle size, turbidity, interfacial tension and microfluidizer. Particle size analysis and turbidity measurement to evaluate the emulsion stability were used. It was concluded that the process of the emulsification was an important indicator of the stability of the translucent microemulsion. From the particle size and and turbidity measurement of translucent microemulsion, adding the surfactant to the oil phase before the emulsification was found to be the most important factor for the stability of emulsions. We found that interfacial tension of the adding the surfactant to the oil phase is lower than that of the adding the surfactant to aqueous phase. In spite of hydrophilic surfactant, adding the surfactant to aqueous phase produced inferior emulsion to that to oil phase.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1623-1628
• /
• 2004

Recently mini-channels or micro-channels are widely used for cooling the high density power electronic devices. Especially, the channels are used in small and high efficient equipments such as heat pipes and heat exchangers. Interfacial velocities between liquid and gas phases are very important in mini or micro-channels. In this paper, an experiment and a numerical analysis on the interfacial velocities were performed. In the experiment, the interfacial velocities which were measured by the high-speed CCD camera were about $26{\sim}33$ cm/s and the velocities increased as the inclination angle did. In the numerical experiment, CFD-ACE+, a commercial program, was used, the velocities had similar values with experimental results. As the inclination angle and the contact angle increased, the interfacial velocities did because of the surface tension which causes to move the interface. The effect of inclination angle was larger in the converging channels than in straight channels.

• Macromolecular Research
• /
• 제10권1호
• /
• pp.24-33
• /
• 2002

Interfacial and microfailure properties of carbon fiber/epoxy composites were evaluated using both tensile fragmentation and compressive Broutman tests. A monomeric and two polymeric coupling agents were applied via the electrodeposition (ED) and the dipping applications. A monomeric and a polymeric coupling agent showed significant and comparable improvements in interfacial shear strength (IFSS) compared to the untreated case under both tensile and compressive tests. Typical microfailure modes including cone-shaped fiber break, matrix cracking, and partial interlayer failure were observed under tension, whereas the diagonal slipped failure at both ends of the fractured fiber appeared under compression. Adsorption and shear displacement mechanisms at the interface were described in terms of electrical attraction and primary and secondary bonding forces.

• 한국응용과학기술학회지
• /
• 제23권3호
• /
• pp.185-191
• /
• 2006

It is desirable to have an accurate expression on the temperature dependence of surface(or interfacial) tension ${\sigma}$, because most of the interfacial thermodynamic functions can be derived from it. There have been proposed several equations on the temperature dependence of the surface tension, ${\sigma}(T)$. Among them $E{\ddot{o}}tv{\ddot{o}}s$ equation and the one modified by Katayama, which is called Katayama equation, for improving accuracies of $E{\ddot{o}}tv{\ddot{o}}s$ equation close to critical points, have been most well-known. In this article Katayama equation is interpreted on the basis of the cell model to understand the nature of the equation. The cell model results in an expression very similar to Katayama equation. This implies that, although $E{\ddot{o}}tv{\ddot{o}}s$ and Katayama equations were obtained on the basis of experimental results, they have a sound theoretical background. The Katayama equation is also modified with the phase volume replaced with a critical scaling expression. The modified Katayama equation becomes a power-law equation with the exponent slightly different from the value obtained by critical-scaling theory. This implies that Katayama equation can be replaced by a critical-scaling equation which is proven to be accurate.

• 대한화학회지
• /
• 제40권1호
• /
• pp.1-10
• /
• 1996

Gibbs' adsorption isotherms을 이용하여, 계면에서 보조계면활성제 분자의 분자 면적과 계면장력거동에 미치는 ethylene oxide(EO)와 propylene oxide(PO)의 영향을 조사하였다. 일반식 $C_4H_9O(EO)m(PO)_nH$를 갖는 alcohol들의 보조계면활성제로서의 특성을 연구하였는데, 이 alcohol들은 일반적으로 사용되는 보조계면활성제에 비해서 분자량이 크며 계면활성 또한 큰 특성을 갖고있다. EO와PO의 몰수와 이들이 첨가된 상대적 순서는 물/기름 계면에서 alcohol 분자의 분자면적과 계면장력 특성에 큰 영향을 미치는 것을 알 수 있었으며, 다음의 결론을 얻었다. 1) PO는 EO에 비해서 계면흡착 효율은 낮으나, 계면장력 저하 능력은 더 크다. 2) 분자량은 같으나 구조가 다른 분자들, 즉 EO와PO의 첨가 순서만 다른 분자들의 경우는, 계면흡착 효율이 큰 (계면에서의 분자면적이 작은) 분자들이 계면장력 저하 능력이 더 크다. 3) 동일한 친유기에 EO나 PO가 많이 첨가될수록, 분자들의 계면에서의 분자면적은 커지나 계면장력 저하능력도 커진다.

• 한국산학기술학회논문지
• /
• 제10권8호
• /
• pp.2005-2014
• /
• 2009

PDLC 필름을 제작하는 데는 여러 방법들이 있으나 그중 하나로서 에멀젼 기술에 기반을 둔 NCAP필름 제조방법이 있다. 이러한 에멀젼 기술은 물에 부분적으로 용해될 수 있는 PVA, PVP와 같은 고분자로 NCAP를 제조할 수 있고, 또한 안정제 없이도 안정한 액정 에멀젼을 형성할 수 있다. 본 연구에서는 물에 녹는 것과 물에 녹지 않는 부분을 가지고 있는 분자로 구성된 공중합체에 대하여 에멀젼의 안정성과 계면장력, 표면장력이 공중합체의 구성, 농도, 소수성 체인 등에 의존한다는 것도 연구하였다. Acrylamide-styrene(AA-ST)계 공중합체는 같은 농도조건에서 사용한 다른 공중합체보다 낮은 계면장력을 나타낸다. 낮은 계면장력 때문에 AA-ST 공중합체는 액정분자들과 좋은 친화성을 갖는다. 또한 액정표면에 쉽게 흡수되는 분자들이 액정 에멀젼 시스템을 더 안정화하다는 것과 형태학적 분석을 통한 액정의 안정성도 논의하였다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2001년도 제3회 부산.경남지부 심포지엄
• /
• pp.14-28
• /
• 2001

As basic study for purpose bioremedation in oil-contaminated environment, Primarily, we isolated biosurfactant producer- strains utilized of oil-agar plate, and measured surface tension and emulsifying activity. We investigated in oil-contaminated soil and sea water. In this laboratory, Pseudomonas sp. EL-012S strain isolated from oil-contaminated soil was able to product novel biosurfactant under the optimal culture condition. Its condition was n-hexadecane 2.0%, NH$_4$NO$_3$0.4%, Na$_2$HPO$_4$0.6%, KH$_2$PO$_4$0.4%, MgSO$_4$.7$H_2O$ 0.02%, CaCl$_2$.2$H_2O$ 0.001%, FeSO.7$H_2O$ 0.001%, initial pH 7.0 and aeration at 3$0^{\circ}C$, respectively. This biosurfactant was produced in both late-exponential and early-stationary phase. The biosurfactant from Pseudomonas sp. EL-012S was composed of carbohydrate, lipid and protein. The purified-biosurfactant was examined two (biosurfactant type I, II) with the silica gel G60 column chromatography and the purified biosurfactant confirmed thin layer chromatography, high performed liquid chromatography and gas chromatography. The biosurfactant type I involved in carbohydrate-lipid-protein characteristics lowered surface tension of water to 27dyne/cm and interfacial tension 4.5dyne/cm aginst to n-hexadecane and the biosurfactant type B involved in carbohydrate lipid characteristics lowered surface tension of water to 30dyne/cm and interfacial tension 8dyne/cm against to n-hexadecane. Specially type I had the properties such as strong emulsifying activity, emulsion stability, pH-stability, thermo-stability, high cleaning activity and forming ability.