• Korean Journal of Food Science and Technology
• /
• v.12 no.1
• /
• pp.45-52
• /
• 1980

The nylon (poly 6, 10) microcapsules containing ${\beta}-galactosidase$ were obtained by the interfacial polymerization of 1, 6-diaminohexane and sebacoyl chloride with ${\beta}-galactosidase$ from Escherichia coli. They were generally spherical and had a mean diameter of $80{\mu}$ with 45 % of the activity recovery. In particular, there was no transport hamper of lactose through the membrane of microcapsules. The characteristics of the microencapsulated enzyme were similar to those of soluble enzyme optimal pHs, $7.0{\sim}7.2$ for the soluble and $7.3{\sim}7.5$ for the microencapsulated ; optimal temperatures, $50^{\circ}C$ for both ; apparent $K_m,\;3.33{\times}10^{-4}(on ONPG),$ $2.86{\times}10^{-3}$ M(on lactose) for the soluble and $5.28{\times}10^{-4}$ (on ONPG), $4.25{\times}10^{-3}$ M (on lactose) for the microencapsulated ; activation energies, 8.94 for the soluble and 9.78 Kcal/mole for the microencapsulated enzyme. Using this microencapsulated ${\beta}-galactosidase$, hydrolyses of lactose and milk lactose were carried out and 80 % of 5 % lactose solution and 70 % of lactose in skim milk were hydrolyzed in 40 hr at $27^{\circ}C$. The reusability and operational stability showed that the remaining activity was 50 % of the original activity after 5 runs and 120 hr of total operating time at $27^{\circ}C$.

• Membrane Journal
• /
• v.29 no.6
• /
• pp.348-354
• /
• 2019

Recently, the application range of organic solvent nanofiltration (OSN) technology has been expanding, requiring membranes with better performance. In this work, thin film composite (TFC) OSN membrane was fabricated. First, ultrafiltration support membrane was prepared via nonsolvent-induced phase separation (NIPS) technique using polysulfone (PSf) and polyethersulfone (PES). Then, the effect of pore forming additives such as polyvinylpyrrolidone (PVP) and pluronic F-127 were employed to improve the membrane permeance. The well-known interfacial polymerization technique was employed using MPD-TMC chemistry to form a thin film on top of the fabricated support, and its solvent permeance and nanofiltration performance was characterized. It was found that polyethersulfone support exhibited more reliable performance compared to polysulfone, and PVP additive was more effective compared to Pluronic F-127. As for the oSN performance, polar aprotic solvents like acetonitrile show significantly higher flux (986.5 L·m^-2·h^-1·bar^-1) compared to water and EtOH (9.5 L·m^-2·h^-1·bar^-1).

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.1
• /
• pp.60-68
• /
• 2012

In this study, the manufacturing process of micro capsulized PCM (phase changing material) for thermal storage performance of latent heat was investigated to save energy during the use of buildings: i.e. use of melamine-type resin as the micro-capsule material and paraffin wax as the inner material that are together used in concrete walls. For the manufacturing process of the micro-capsulized PCM, the amount of SDS addition as surfactant was the key variable and the resulting thermal storage performance depended on the SDS amount. With increasing amount of SDS, the micro capsulation became much easier while the capsule surface became harder. The micro capsules became uniform at an optimum SDS addition. The addition of SDS also affected the thermal capacity: with increasing SDS amount, the heat storage and release tendency at melting point was more clearly manifested. The current investigation is part of a study under progress to explore the use of PCM in concrete walls to save building maintenance cost and energy.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.1 no.1
• /
• pp.17-25
• /
• 2013

Thermal storage technology used for indoor heating and cooling to maintain a constant temperature for a long period of time has an advantage of raising energy use efficiency. This, the phase changing material, which utilizes heat storage properties of the substances, capsulizes substances that melt at a constant temperature. This is applied to construction materials to block or save energy due to heat storage and heat protection during the process in which substances melt or freeze according to the indoor or outdoor temperature. The micro-encapsulation method is used to create thermal storage from phase changing material. This method can be broadly classified in 3 ways: chemical method, physical and chemical method and physical and mechanical method. In the physical and chemical method, a wet process using the micro-encapsulation process utilized. This process emulsifies the core material in a solvent then coats the monomer polymer on the wall of the emulsion to harden it. In this process, a surfactant is utilized to enhance the performance of the emulsion of the core material and the coating of the wall monomer. The performance of the micro-encapsulation, especially the coating thickness of the wall material and the uniformity of the coating, is largely dependent on the characteristics of the surfactant. This research compares the performance of the micro-capsules and heat storage for product according to molecular mass and concentration of the surfactant, SSMA (sulfonated styrene-maleic anhydride), when it comes to micro-encapsulation through interfacial polymerization, in which Dodecan-1 is transformed to melamin resin, a heat storage material using phase changing properties. In addition, the thickness of the micro-encapsulation wall material and residual melamine were reduced by adjusting the concentration of melamin resin microcapsules.