• 한국세라믹학회지
• /
• 제55권4호
• /
• pp.344-351
• /
• 2018

The effects of bond coat species on the growth behavior of thermally grown oxide (TGO) layer in thermal barrier coatings (TBCs) was investigated through furnace cyclic test (FCT). Two types of feedstock powder with different particle sizes and distributions, AMDRY 962 and AMDRY 386-4, were used to prepare the bond coat, and were formed using air plasma spray (APS) process. The top coat was prepared by APS process using zirconia based powder containing 8 wt% yttria. The thicknesses of the top and bond coats were designed and controlled at 800 and $200{\mu}m$, respectively. Phase analysis was conducted for TBC specimens with and without heat treatment. FCTs were performed for TBC specimens at $1121^{\circ}C$ with a dwell time of 25 h, followed by natural air cooling for 1 h at room temperature. TBC specimens with and without heat treatment showed sound conditions for the AMDRY 962 bond coat and AMDRY 386-4 bond coat in FCTs, respectively. The growth behavior of TGO layer followed a parabolic mode as the time increased in FCTs, independent of bond coat species. The influences of bond coat species and heat treatment on the microstructural evolution, interfacial stability, and TGO growth behavior in TBCs are discussed.

• 한국재료학회지
• /
• 제11권5호
• /
• pp.398-404
• /
• 2001

SiC 보강재 표면에 도금된 Cu금속층이 Al/SiC복합재료의 젖음성에 미치는 영향을 검토하였다. 보강재에 대한 금속층의 도금은 무전해도금법을 이용하였으며, Al/SiC 복합재료의 제조는 텅스텐 발열체 진공로의$ 670^{\circ}C$~$900^{\circ}C$에서 제조하여 보강재와 기지간의 접촉부위를 촬영하여 젖음성을 측정하였다 젖음성 측정 결과 보강재에 도금된 Cu층은 젖음성을 향상시켰고, 젖음성의 개선은 보강재에 도금된 금속층과 기지간의 반응에 의해 계면에너지를 변화시킴으로서 나타난 결과이며. 반응을 통한 산화피막의 배제도 영향을 미친 것으로 판단된다

• 마이크로전자및패키징학회지
• /
• 제6권2호
• /
• pp.69-74
• /
• 1999

흑연 및 카본계 재료는 층상구조 내부로 리튬이온을 가역적으로 intercalation /deintercalation시킬 수 있는 특성을 지니고 있다. 리튬이온이 intercalation된 카본의 전기화학적 퍼텐셜은 리튬금속에 가까운 값이므로, 리튬이온전지의 부극용 재료로 많은 연구가 진행되고 있다. 본 연구에서는 petroleum pitch를 열분해시킨 후, 700~$1300^{\circ}C$의 서로 다른 온도에서 각각 3시간 동안 열처리한 카본을 사용하였다. XRD 측정 결과, 카본의 결정성은 열처리 온도와 함께 증가하였다. 충방전 특성 시험 및 전해질과 카본전극 표면 사이의 계면 반응특성은 각각 0.1C의 속도로 정전류법에 의한 충방전 시험과 순환전압전류법(CV)에 의해 평가하였으며, 열처리 온도와 충방전 횟수에 따른 용량과의 관계에 대하여 논의하였다. 가역용량(reversible capacity)은 열처리 온도가 증가함에 따라 $1000^{\circ}C$까지는 증가하지만, 그 이상의 온도에서는 약간 감소하는 경향을 보였다. 또한, 충방전 횟수가 증가할수록 충전용량은 감소하지만, 가역특성(reversibility)은 향상되었다.

• 한국산학기술학회논문지
• /
• 제15권4호
• /
• pp.2029-2035
• /
• 2014

본 논문은 입상활성탄에 의해서 합성폐수에서의 용존유기탄소의 흡착평형과 회분식 실험을 통해 흡착성질을 파악하고자 하였다. 흡착평형의 새로운 모델식을 제안하였고 이 식을 바탕으로 회분식 실험데이터를 모사하였다. 합성폐수의 유기성분은 Beef extract, Peptone, Humic acid, Tannic acid, Sodium lignin sulfonate, Sodium lauryle sulfate, Arabic gum powder, Arabic acid (polysaccharide), $(NH_4)_2SO_4$, $K_2HPO_4$, $NH_4HCO_3$, $MgSO_4{\cdot}7H_2O$ 등으로 구성되었다. 농도가 낮은 영역 (0~2.5 mg/L)에서는 선형적인 흡착평형을 보여주었고, 농도가 높은 영역 (2.5~6mgl/L)에서는 우호적인 흡착평형을 보여주었다. 사용되어진 생물학적 처리방법에서 나오는 유출수의 합성폐수는 알려진 양으로 준비되어졌다. 흡착평형 모델링은 Freundlich, Langmuir, Sips 및 하이브리드 식을 이용하여 모사하였다. 특히, 선형과 Sips를 이용한 하이브리드 흡착평형식은 낮은 농도와 높은 농도 역에서 매우 좋은 흡착평형식이었다. 용수 및 폐수처리에 활성탄 흡착에 있어서, 선형식과 Sips식을 합친 새로운 하이브리드 식은 새로운 흡착평형식이 될 수 있었다. 하이브리드 흡착평형식 (선형+Sips)을 이용하여 LDFA 운동학적식을 통하여 다양한 흡착제 양에 따른 회분식 반응조에서의 실험데이터를 잘 모사할 수 있었다.

• Restorative Dentistry and Endodontics
• /
• 제27권6호
• /
• pp.569-576
• /
• 2002

This study was peformed to evaluate the interfacial shear bond strength of base (direct and indirect) and repair composites with aging and surface treatment methods. Direct composite resin specimens ($Charisma^{\circledR}$, Heraeus Kulzer, Germany) were aged for 5 min, 1 hour, 24 hours, and 1 week in $37^{\circ}C$ distilled water before surface treatment, and then divided into five groups Group 1, grinding; Group 2, grinding and application of bonding agent, Group 3, grinding, etching with 37% phosphoric acid for 30sec, and application of bonding agent, Group 4, grinding, etching with 37% phosphoric acid for 30sec, silane treatment, and application of bonding agent ; Group 5, grinding, etching with 4% hydrofluoric acid for 30sec. silane treatment, and application of bonding agent. Indirect composite resin specimens ($Artglass^{\circledR}$, Heraeus Kulzer, Germany) were aged for 1 week in $37^{\circ}C$ distilled water and divided into seven groups Group 1 - Group 5, equal to Charisma specimens; Group 6, grinding, etching with 37% phosphoric acid for 60sec, silane treatment, and application of bonding agent; Group7, grinding, etching with 4% hydrofluoric acid for 60 sec, silane treatment, and application of bond-ing agent. The repair material($Charisma^{\circledR}$) was then added on the center of the surface (5 mm in diameter. 5 mm in height). The shear bond strength was tested and the data was analyzed using one-way ANOVA and the Student- Newman-Keuls test. The following conclusions were drawn. 1 The shear bond strength of $Charisma^{\circledR}$ specimens aged for 1 hour was significantly higher in Group 2 and Group 5 than in Group 1 (p<0.05), and that of $Charisma^{\circledR}$ specimens aged for 1 week was signifi-cantly higher in Group 3 and Group 5 than in Group 1 (p<0.05). No significant difference was found in the bond strength of specimens aged for 5 min and 24 hours. 2. In Group 2 of the $Charisma^{\circledR}$ specimens, there was significant difference between the bond strength of 24 hours and that of 1 week (p<0.05). 3. In Group 4 of the $Charisma^{\circledR}$ specimens, the shear bond strength of specimens aged for 24 hours was significantly higher than the others(p<0.05) 4. There was no significant difference between the shear bond strength of the $Artglass^{\circledR}$ specimens, 5. Most of the $Charisma^{\circledR}$ specimens showed cohesive fractures. Artglass^{\circledR}$ specimens that were etched with acid (phosphoric or hydrofluoric) for 30 sec showed more cohesive fractures.

• 접착 및 계면
• /
• 제20권3호
• /
• pp.87-95
• /
• 2019

본 연구에서는 볏짚/재활용폴리에틸렌 복합재료의 굴곡특성과 충격강도에 미치는 볏짚의 알칼리처리 영향을 조사하였다. 알칼리처리는 여러 가지 수산화나트륨(NaOH) 농도에서 두 가지 다른 방법으로 수행되었다. 한 가지는 정적인 soaking 방법이고, 다른 하나는 동적인 shaking 방법이다. 복합 재료는 이축압출공정으로 제조된 볏짚/재활용폴리에틸렌 펠렛을 사용하여 압축성형기술로 제조하였다. 결과는 알칼리처리 방법과 농도에 크게 의존하였다. Shaking 방법의 경우 1 wt%의 낮은 NaOH 농도에서 가장 우수한 굴곡과 충격 특성이 나타난 반면, soaking 방법의 경우에는 10 wt%의 높은 농도에서 가장 우수한 특성이 나타났다. 이러한 결과는 복합재료의 섬유-매트릭스 계면결합 현상에 의해 정성적으로 뒷받침되었다. 상기 가장 높은 물성을 갖는 두 경우 사이의 물성은 상호 비견할 만한 수준이었다. 본 연구는 10 wt% 또는 그 이상의 높은 농도의 NaOH를 사용하기보다 1wt%의 낮은 농도가 복합재료의 굴곡 및 충격 특성 향상을 위한 천연섬유의 알칼리처리에 적용될 수 있음을 제시하고 있다. 알칼리처리가 환경에 미치는 우려를 고려할 때, shaking 방법의 사용이 바람직할 수 있다.

• 한국주조공학회지
• /
• 제10권1호
• /
• pp.43-49
• /
• 1990

The influences of Cu and Mg addition on wear properties of SiC particulate reinforced Al-Si metal(alloy) matrix composites were investigated. Metal matrix composites were prepared by combination of compocasting and hot pressing techniques. The main results obtained are as follows : 1) The composite with Mg addition exhibits letter wear resistance than that with Cu addition. It is considered that Mg addition improved wettability of matal matrix composite by the strong segregation to the SiC / Al matrix interface. 2) After homogenization treatment, it was found that the interfacial segregation of Mg was predominant, while that of Cu was not detected. 3) The SiC / Al-11Si eutectic composite exhibits better wear resistance than the SiC / Al-6Si hypoeutectic composite does. 4) It seems that the increase in the amount of Mg addition affects on the uniform dispersion of SiC particulates, on the refinement of microstructure and on age hardening and these effects cause wear resistance improvement of composites.

• International Journal of Korean Welding Society
• /
• 제4권1호
• /
• pp.53-60
• /
• 2004

Adhesive-bonded joints are widely used in the industry. Recently, applications of adhesive bonding joints have been increased extensively in automobile and aircraft industry. The strength of adhesive joints is influenced by the surface roughness, adhesive shape, stress distribution, and etc. However, the magnitude of the influence has not yet been clarified because of the complexity of the phenomena. In this study, as the fundamental research of adhesive bonding joints, the effects of adhesive shape and loading speed on bonding strength properties and durability of aluminum to polycarbonate single-lap joints were studied. To evaluate the effect of adhesive shape, several modified shapes were used, and loading speeds were varied from 0.05 to 5mm/min. As a result, the load distribution showed a brittle fracture tendency. The trigonal edged single lap and bevelled lap joints showed the higher strength than the plain single lap, trigonal single lap, joggle lap and double lap joints in same adhesive area. The fractures of trigonal single lap and trigonal edged single lap joints that had the higher strength level were shown as the mixture type of the cohesive and interfacial-failure, mostly joggle lap joints that had the lower strength level were shown as the adhesive-failure.

• 한국분말재료학회지
• /
• 제20권2호
• /
• pp.120-124
• /
• 2013

This study is carried out to develop the new process for the fabrication of ultra-fine electrodes on the flexible substrates using superhydrophobic effect. A facile method was developed to form the ultra-fine trenches on the flexible substrates treated by plasma etching and to print the fine metal electrodes using conductive nano-ink. Various plasma etching conditions were investigated for the hydrophobic surface treatment of flexible polyimide (PI) films. The micro-trench on the hydrophobic PI film fabricated under optimized conditions was obtained by mechanical scratching, which gave the hydrophilic property only to the trench area. Finally, the patterning by selective deposition of ink materials was performed using the conductive silver nano-ink. The interface between the conductive nanoparticles and the flexible substrates were characterized by scanning electron microscope. The increase of the sintering temperature and metal concentration of ink caused the reduction of electrical resistance. The sintering temperature lower than $200^{\circ}C$ resulted in good interfacial bonding between Ag electrode and PI film substrate.

• 전기화학회지
• /
• 제13권4호
• /
• pp.246-250
• /
• 2010

In this study, nano-crystallized $Al_2O_3$ was coated on the surface of $LiFePO_4$ powders via a novel dry coating method. The influence of coated $LiFePO_4$ upon electrochemical behavior was discussed. Surface morphology characterization was achieved by transmission electron microscopy (TEM), clearly showing nano-crystallized $Al_2O_3$ on $LiFePO_4$ surfaces. Furthermore, it revealed that the $Al_2O_3$-coated $LiFePO_4$ cathode exhibited a distinct surface morphology. It was also found that the $Al_2O_3$ coating reduces capacity fading especially at high charge/discharge rates. Results from the cyclic voltammogram measurements (2.5-4.2 V) showed a significant decrease in both interfacial resistance and cathode polarization. This behavior implies that $Al_2O_3$ can prevent structural change of $LiFePO_4$ or reaction with the electrolyte on cycling. In addition, the $Al_2O_3$ coated $LiFePO_4$ compound showed highly improved area-specific impedance (ASI), an important measure of battery performance. From the correlation between these characteristics of bare and coated $LiFePO_4$, the role of $Al_2O_3$ coating played on the electrochemical performance of $LiFePO_4$ was probed.