• 한국인터넷방송통신학회논문지
• /
• 제8권3호
• /
• pp.57-70
• /
• 2008

This paper introduces a new paradigm of physical layer security through channel coding for wireless networks. The well known spread spectrum based physical layer security in wireless network is applicable when code division multiple access (CDMA) is used as wireless air link interface. In our proposal, we incorporate the proposed security protocol within channel coding as channel coding is an essential part of all kind of wireless communications. Channel coding has a built-in security in the sense of encoding and decoding algorithm. Decoding of a particular codeword is possible only when the encoding procedure is exactly known. This point is the key of our proposed security protocol. The common parameter that required for both encoder and decoder is generally a generator matrix. We proposed a random selection of generators according to a security key to ensure the secrecy of the networks against unauthorized access. Therefore, the conventional channel coding technique is used as a security controller of the network along with its error correcting purpose.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2009년도 정기 학술대회
• /
• pp.38-41
• /
• 2009

Debonding behavior of symmetric tilt bicrystal interfaces with <100> misorientation axis is investigated through molecular dynamics simulations. FCC single crystal copper is considered in each grain and the model is idealized as a grain boundary under mechanical loading. Embedded-Atom Method potential is chosen to calculate the interatomic forces between atoms. Constrained tensile deformations are applied to a variety of misorientation angles in order to estimate the effect of grain boundary angle on local peak stress. A new parameter of symmetric grain-boundary structure is introduced and refines the correlation between grain boundary angle and local peak stress.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 V
• /
• pp.2895-2898
• /
• 2003

In this study, our primary goal is to classify the EMG(electromyographic) signals including the specific patterns related to hand motions in an arm. To do this, the EMG recognition method based on the LP coefficients and delay between multi-channels obtained by cross-correlation function is presented. The study consists of three functional parts, which are pans for obtaining the EMG signals from am muscle, analyzing LP coefficients and delay parameter obtained by cross-correlation function, and recognizing specific patterns. In the experiment, the result of the present method is compared with the results of the conventional methods. We expect that the results of this study is very effective in the mobile computer and wearable computer environment.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.415-418
• /
• 2005

DSP chip parameters of a digital hearing aid (HA) should be optimally selected or fitted for hearing impaired persons. The more precise parameter fitting guarantees the better compensation of the hearing loss (HL). Digital HAs adopt DSP chips for more precise fitting of various HL threshold curve patterns. A specific DSP chip such as Gennum GB3211 was designed and manufactured in order to match up to about 4.7 billion different possible HL cases with combination of 7 limited parameters. This paper deals with a digital HA fitting program which is developed for optimal fitting of GB3211 DSP chip parameters. The fitting program has completed feature from audiogram input to DSP chip interface. The compensation effects of the microphone and the receiver are also included. The paper shows some application examples.

• 한국전기전자재료학회논문지
• /
• 제20권9호
• /
• pp.793-797
• /
• 2007

In this paper, the long time breakdown characteristic of the epoxy composite, which is widely used in the insulation system for high voltage application, was estimated with Weibull distribution. In the procedure of the estimation, the short time breakdown characteristics for the epoxy composite specimens, which were made with the variation of hardener and/or filler, were tested firstly. Then the long time voltage-to-time test was implemented. Finally, the long time breakdown voltage of each specimen was estimated with the parameters obtained from the statistical treatment with Weibull distribution. Base on the results, it has been found that the optimal weight ratio of epoxy resin/hardener/filler that has the excellent long time breakdown characteristic was 100/100/65. It was due to the silane treatment which relieves the electric field at the interface between filler and epoxy.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.115-118
• /
• 1998

ATM(Asynchronous Transfer Mode)을 기반으로한 BSC(Base Station Controller)를 이용한 무선 이동통신망에서는 크게 MSC, BSC, BTS로 구성 되어진다. BSC는 MSC(Mobile Switch Center)와의 STM-1급 (155.52Mbps) 정합이 이루어지며, 여러 BTS(Base Transceiver Subsystem)와 T1(1.544Mbps)/E1(2.048Mbps)급 정합이 이루어져 호연결, 관리, 제어 및 MT(Mobile Terminal)의 soft-handoff를 담당한다. BSC내의 저속 가입자 I/F에서는 BTS와 BSC내의 ATM switch와의 정합을 수행하면서 VPI/VCI변환, BSC 내부 cell format으로 변환, 그리고 UPC(Usage Parameter Control)등이 이루어진다. 본 논문에서는 ATM switch를 이용한 BSC 내부의 저속 가입자 I/F의 구현에 관해서 살펴본다.

• 한국전산유체공학회지
• /
• 제11권3호
• /
• pp.14-21
• /
• 2006

A numerical simulation of the binary collision dynamics of water drops for size ratios of 1 and 0.75, for the Weber number range of 5 to 100, and for all impact parameter is reported. Two different types of separating collisions, namely reflexive and stretching separations, are identified. A numerical method is based on a fractional-step method with a finite volume formulation and the interface is tracked with Volume of Fluid(VOF) method, including surface tension. Numerical results for size ratios 1 and 0.75 are reasonablely compared with Ashgriz and Poo's experimental results.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.195-198
• /
• 2005

The role of elastic/plastic mismatch on the contact crack initiation is investigated for designing desirable surface-coated asymmetric layered composites. Various layered composites such as $Si_3N_4$ ceramics on $Si_3N_4+BN$ composite, soda-lime glass on various substrates with different elastic modulus for the analysis. Spherical indentation is conducted for producing contact cracks from the surface or interface between the coating and the substrate layer. A finite element analysis of the stress fields in the loaded layer composites enables a direct correlation between the damage patterns and the stress distributions. Implications of these conclusions concerning the design of asymmetric layered composites indicate that the elastic modulus mismatch is one of the important parameter for designing layered composite to prevent the initiation of contact cracks.

• 한국항공운항학회지
• /
• 제10권1호
• /
• pp.21-34
• /
• 2002

This study is performed to secure the safety of civil aviation by establishing systematic analysis ability of Flight Data Recorder. Through this study, downloading SSFDR(Solid State Flight Data Recorder) to personal computer, editing interface file, flight data numerical analysis and regulations relayed to the aircraft with changes in destination airport in flight are performed. In the analysis, the flight data of B747-400 model aircraft between Los Angeles(KLAX) and Jeju(RKPC) was selected.

• 제어로봇시스템학회논문지
• /
• 제11권12호
• /
• pp.1002-1010
• /
• 2005

We study on the implementation of reconfigurable position control system which is based on Open Control Platform(OCP) for Unmanned Expedition Vehicles(UEV) in ubiquitous environment. The control system uses hierarchical control structure and OCP structure which contains three layers such as core OCP, reconfigurable control API(Application Programmer Interface), generic hybrid control API. The goal of our research is to implement an UEV control system using advanced software technology. As a specific control problem, we study a transition management problem between PID control and neural network control depending on fault or parameter change of the plant, i.e., UEV. The concept of the OCP-based software-enabled control can provide synergy effect by the integration of software component, middleware, network communication, and control, and thus can be applied to various systems in ubiquitous environment.