• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.3
• /
• pp.423-429
• /
• 1997

A simplified method for determining the mode components of the strain energy release rate of free-edge delaminations in laminated composite is proposed. The interlaminar stresses are evaluated as an interface moment and interface shear forces that are obtained from the equilibrium equations at the interface between the adjacent layers. Deformation of an edge-delaminated laminate is calculated by using a generalized quasi-three dimensional classical laminated plate theory developed by the authors. The analysis provides closed-form expression for the three components of the strain energy release rate. Comparison of results with a finite element solution using the virtual crack closure technique shows good agreement. In the present study, laminated composite with stacking sequences of [30/-30/90]$_{s}$ were examined. The simple nature of the method makes it suitable for primary design analysis for the delaminations of laminated composite.e.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.1
• /
• pp.17-22
• /
• 2011

Ultimate goals in vehicle design can be summarized as environment-friendliness and safety. Along with these requirements, the importance of natural environment conservation has been focused lately. Therefore, reduced emission from vehicle and improved efficiency has become the top priority projects throughout the world. CFRP(Carbon Fiber Reinforced Plastics) of the advanced composite materials as structure materials for vehicles, has a widely application in lightweight structural materials of air planes, ships and automobiles because of high strength and stiffness. This study is to investigate the energy absorption characteristics of CFRP hat-shaped section members under the axial impact collapse test. The CFRP hat-shaped section members which manufactured from unidirectional prepreg sheets were made of 8plies. The axial impact collapse tests were carried out for each section members. The collapse mode and energy absorption characteristics were analyzed for CFRP hat-shaped section member according to the interface numbers(2, 3, 4, 6 and 7).

• Korean Journal of Materials Research
• /
• v.15 no.9
• /
• pp.566-576
• /
• 2005

This paper describes an ab Initio study on interface energies, misfit strain energies, and electron structures at coherent interfaces Fe(bcc structure)/MCs(NaCl structure M=Ti, Zr, Hf). The interface energies at relaxed interfaces Fe/TiC, Fe/ZrC and Fe/HfC were 0.263, 0.153 and $0.271 J/m^2$, respectively. It was understood that the dependence of interface energy on the type of carbide was closely related to changes of the binding energies between Fe, M and C atoms before and after formation of the interfaces Fe/MCs with the help of the DLP/NNBB (Discrete Lattice Plane/ Nearest Neighbour Broken Bond) model and data of the electron structures. The misfit strain energies in Fe/TiC, Fe/ZrC and Fe/HfC systems were 0.390, 1.692 and 1.408 eV per 16 atoms(Fe: 8 atoms and MC; 8 atoms). More misfit energy was generated as difference of lattice parameters between the bulk Fe and the bulk MCs increased.

• Tribology and Lubricants
• /
• v.39 no.6
• /
• pp.273-277
• /
• 2023

This paper presents a molecular dynamics simulation-based numerical investigation of the influence of surface energy on water lubrication. Models composed of a crystalline substrate, half cylindrical tip, and cluster of water molecules are prepared for a tribological-characteristic evaluation. To determine the effect of surface energy on lubrication, the surface energy between the substrate and water molecules as well as that between the tip and water molecules are controlled by changing the interatomic potential parameters. Simulations are conducted to investigate the indentation and sliding processes. Three different normal forces are applied to the system by controlling the indentation depth to examine the influence of normal force on the lubrication of the system. The simulation results reveal that the solid surface's surface energy and normal force significantly affect the behavior of the water molecules and lubrication characteristics. The lubrication characteristics of the water molecules deteriorate with the increasing magnitude of the normal force. At a low surface energy, the water molecules are readily squeezed out of the interface under a load, thus increasing the frictional force. Contrarily, a moderate surface energy prevents expulsion of the water molecules due to squeezing, resulting in a low frictional force. At a high surface energy, although squeezing of the water molecules is restricted, similar to the case of moderate surface energy, dragging occurs at the soil surface-water molecule interface, and the frictional force increases.

• Transactions of the Korean hydrogen and new energy society
• /
• v.1 no.1
• /
• pp.48-54
• /
• 1989

Semiconductive property of the passivating $TiO_2$ film was investigated by measuring the impedance of passivated titanium electrode in a 0.1 N NaOH solution. The passive film was prepared galvanostatically with $10mA/cm^2$ at formation potential of 50 V in a 1 N $H_2SO_4$ solution. The impedance measurement was conducted by superimposing an ac voltage of 5 m V amplitude with the frequency ranging from 5 to 10000 Hz on a dc bias (applied potential). The donor distribution in the film was depicted from the analysis of the non-linear slope of Mott-Schottky plot. The region with nearly constant concentration of donors near the electrolyte/film interface amounts at about 60 percent of the total film thickness and donor concentration increases largely with distance from the surface in an inner region near the film/metal interface. In a region of the film/metal interface the donor concentration showed a frequency dependence greater than in a region of the electrolyte/film interface. The result of donor concentration against frequency suggests a transition from crystalline to amorphous state with distance from the electrolyte/film interface in the passivating $TiO_2$ films. This is also confirmed by the ac conductivity measurement.

• Solar Energy
• /
• v.20 no.1
• /
• pp.11-20
• /
• 2000

To get more insight into the buffering effects of the p-${\mu}c$-Si:H Inserted at the p-a-SiC:H/i-a-Si:H interface, we present a systematic numerical simulation using Gummel-Schafetter method. The reduced recombination loss at the p/i interface due to a constant bandgap buffer is analysed in terms of the variation of the p/i Interface region with a short lifetime and the characterisitics of the buffer such as mobility bandgap, acceptor concentration, and D-state density. The numerical modeling on the constant bandgap buffer demonstrates clearly that the buffering effects of the thin p-${\mu}c$-Si:H originate from the shrinkage of highly defective region with a short lifetime in the vicinity of the p/i interface.

• Journal of the Korean Society of Safety
• /
• v.33 no.6
• /
• pp.58-65
• /
• 2018

The life span of the porcelain insulator was made to be 30 years, but currently many of the 154kV NGK porcelain insulators using in Korea are found to have passed the production life. Accidents caused by aged mechanical breakdown can lead to disruption of power supply in some areas, large economic losses, and casualties. Therefore, ultrasonic method, which is one of the non - destructive test methods, is applied as a method for evaluating the integrity of porcelain insulators. In this study, the experiment on the interface of cap was conducted and the difference between the energy difference and the attenuation coefficient of the reflected wave was derived according to the interface state of the steel - cement. The results of this study are expected to be used as the basic data of the ultrasonic testing to evaluate the interface condition of the porcelain insulator cap.

• Transactions on Control, Automation and Systems Engineering
• /
• v.4 no.3
• /
• pp.212-216
• /
• 2002

A practical issue is studied to improve the performance of a new energy based method of achieving stable, high performance haptic interface control. The issue is related to resetting the amount of energy accumulated in the Passivity Observer for faster operation. A heuristic method is derived and experimentally tested for the resetting and it is shown to help the PC to operate sooner when the system gets active. Experimental results are presented for the “Excalibur” haptic device.

• Solar Energy
• /
• v.8 no.1
• /
• pp.33-40
• /
• 1988

The characteristics of thermal instabilities of natural convection in a horizontal fluid layer bounded below by a rigid plate and above by an interface with a passive gas is presented. The critical Grashof number decreases as the surface tension gradient effect (Marangoni effect) at the interface increases and the flow remains unstable for a critical Marangoni number depending on Prandtl numbers. These results are in substantial agreement with those of Smith and Davis.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1999.11a
• /
• pp.107-112
• /
• 1999

증기터빈 및 발전기의 특성을 그대로 모사 하는 PC 기반의 시뮬레이터를 개발하였으며, 사용자가 개발된 시뮬레이터의 기능들을 적절하고 편리하게 사용할 수 있도록 인간공학의 원칙을 고려하여 설계하였다. 이를 위해 시뮬레이터가 가져야 하는 기능들을 시험절차 및 운전 절차를 분석하여 도출하였으며 그 기능들을 각 사용자 인터페이스의 설계 목적에 맞도록 적절하게 배치하였다. 본 논문에서 소개하고자 하는 사용자 인터페이스는 Main Window에서 항상 감시가 가능하도록 설계된 Mimic Display, Information Tiles Display로 시뮬레이터 사용자 인터페이스의 핵심이라고 할 수 있다.